VS-40TPS16PbF, VS-40TPS16-M3 www.vishay.com Vishay Semiconductors Thyristor High Voltage, Phase Control SCR, 40 A FEATURES • High voltage (up to 1600 V) 2 (A) • Designed and qualified JEDEC®-JESD47 according to • 125 °C max. operating junction temperature • Material categorization: For definitions of compliance please see www.vishay.com/doc?99912 3 2 1 TO-247AC 1 (K) (G) 3 Available APPLICATIONS • Typical usage is in input rectification crowbar (soft start) and AC switch in motor control, UPS, welding and battery charge PRODUCT SUMMARY Package TO-247AC Diode variation Single SCR IT(AV) 35 A VDRM/VRRM 1600 V VTM 1.45 V IGT 150 mA TJ -40 °C to 125 °C DESCRIPTION The VS-40TPS16... high voltage series of silicon controlled rectifiers are specifically designed for medium power switching and phase control applications. The glass passivation technology used has reliable operation up to 125 °C junction temperature. MAJOR RATINGS AND CHARACTERISTICS PARAMETER IT(AV) TEST CONDITIONS Sinusoidal waveform VALUES UNITS 35 A IRMS 55 VRRM/VDRM 1600 V 500 A 1.45 V dV/dt 1000 V/μs dI/dt 100 A/μs -40 to 125 °C VRRM/VDRM, MAXIMUM REPETITIVE PEAK AND OFF-STATE VOLTAGE V VRSM, MAXIMUM NON-REPETITIVE PEAK REVERSE VOLTAGE V IRRM/IDRM AT 125 °C mA 1600 1700 10 ITSM VT 40 A, TJ = 25 °C TJ VOLTAGE RATINGS PART NUMBER VS-40TPS16PbF, VS-40TPS16-M3 Revision: 06-Feb-14 Document Number: 94389 1 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-40TPS16PbF, VS-40TPS16-M3 www.vishay.com Vishay Semiconductors ABSOLUTE MAXIMUM RATINGS PARAMETER Maximum average on-state current Maximum continuous RMS on-state current as AC switch Maximum peak, one-cycle non-repetitive surge current SYMBOL IT(AV) TEST CONDITIONS VALUES TC = 79 °C, 180° conduction half sine wave 35 IT(RMS) ITSM Maximum I2t for fusing I2t Maximum I2t for fusing I2t 55 10 ms sine pulse, rated VRRM applied 420 10 ms sine pulse, no voltage reapplied 500 10 ms sine pulse, rated VRRM applied Initial TJ = TJ maximum 880 10 ms sine pulse, no voltage reapplied 1250 t = 0.1 to 10 ms, no voltage reapplied 12 500 Low level value of threshold voltage VT(TO)1 1.02 High level value of threshold voltage VT(TO)2 1.23 Low level value of on-state slope resistance rt1 High level value of on-state slope resistance rt2 UNITS TJ = 125 °C 9.74 7.50 A A2s A2s V m Maximum peak on-state voltage VTM 110 A, TJ = 25 °C 1.85 V Maximum rate of rise of turned-on current dI/dt TJ = 25 °C 100 A/µs Maximum holding current IH Anode supply = 6 V, resistive load, initial IT = 1 A, TJ = 25 °C 200 Maximum latching current IL Anode supply = 6 V, resistive load, TJ = 25 °C 300 TJ = 25 °C 0.5 Maximum reverse and direct leakage current IRRM/IDRM Maximum rate of rise of off-state voltage dV/dt TJ = 125 °C VR = Rated VRRM/VDRM TJ = TJ maximum, linear to 80 % VDRM, Rg - k = Open mA 10 1000 V/µs VALUES UNITS TRIGGERING PARAMETER Maximum peak gate power Maximum average gate power Maximum peak gate current Maximum peak negative gate voltage Maximum required DC gate voltage to trigger TEST CONDITIONS SYMBOL PGM 10 PG(AV) 2.5 IGM 2.5 - VGM 10 TJ = - 40 °C VGT TJ = 25 °C 4.0 Anode supply = 6 V resistive load TJ = 125 °C Maximum required DC gate current to trigger IGT Maximum DC gate voltage not to trigger VGD Maximum DC gate current not to trigger IGD A V 1.7 TJ = - 40 °C TJ = 25 °C 2.5 W 270 Anode supply = 6 V resistive load 150 TJ = 125 °C 80 TJ = 25 °C, for 40TPS08A 40 TJ = 125 °C, VDRM = Rated value mA 0.25 V 6 mA Revision: 06-Feb-14 Document Number: 94389 2 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-40TPS16PbF, VS-40TPS16-M3 www.vishay.com Vishay Semiconductors THERMAL AND MECHANICAL SPECIFICATIONS PARAMETER SYMBOL Maximum junction and storage temperature range TJ, TStg Maximum thermal resistance, junction to case RthJC Maximum thermal resistance, junction to ambient RthJA Maximum thermal resistance, case to heatsink RthCS TEST CONDITIONS VALUES UNITS -40 to 125 °C DC operation 0.6 Mounting surface, smooth and greased 0.2 6 g 0.21 oz. minimum 6 (5) maximum 12 (10) kgf · cm (lbf · in) Approximate weight Mounting torque Case style TO-247AC 40TPS.. Series R thJC (DC) = 0.6 °C/ W 120 110 Conduction Angle 100 30° 60° 90° 90 120° 180° 80 70 0 10 20 30 40TPS16 Maximum Avera g e On-state Power Loss (W) Maximum Allowable Case Temperature (°C) Marking device 130 60 180° 120° 90° 60° 30° 50 40 20 Conduction Angle 40TPS.. Series TJ= 125°C 10 0 40 0 110 Conduction Period 100 60° 90° 120° 180° DC 70 0 10 20 30 40 50 Average On-state Current (A) Fig. 2 - Current Rating Characteristics 60 Maximum Averag e On-state Power Loss (W) Maximum Allowable Case Temperature (°C) 120 80 10 15 20 25 30 35 40 Fig. 3 - On-State Power Loss Characteristics 40TPS.. Series RthJC (DC) = 0.6 °C/ W 30° 5 Avera ge On-sta te Current (A) Fig. 1 - Current Rating Characteristics 90 RMS Limit 30 Average On-state Current (A) 130 °C/W 40 80 DC 180° 120° 90° 60° 30° 70 60 50 40 RMSLimit 30 Conduction Period 20 40TPS.. Series TJ = 125 °C 10 0 0 10 20 30 40 50 60 Avera ge On-sta te Current (A) Fig. 4 - On-State Power Loss Characteristics Revision: 06-Feb-14 Document Number: 94389 3 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-40TPS16PbF, VS-40TPS16-M3 www.vishay.com Vishay Semiconductors 450 350 300 250 1 450 400 350 300 250 200 VS-40TPS.. Series 200 10 Maximum non-repetitive surge current versus pulse train duration. Initial TJ = 150 °C No voltage reapplied Rated VRRM reapplied 500 Peak Half Sine Wave Forward Current (A) 400 Peak Half Sine Wave Forward Current (A) 550 At any rated load condition and with rated VRRM applied following surge. Initial TJ = 150 °C at 60 Hz 0.0083 s at 50 Hz 0.0100 s VS-40TPS.. Series 150 0.01 100 Number of Equal Amplitude Half Cycle Current Pulses (N) 0.1 1 10 Pulse Train Duration (s) Fig. 5 - Maximum Non-Repetitive Surge Current Fig. 6 - Maximum Non-Repetitive Surge Current Instanta neous On-sta te Current (A) 100 10 TJ= 25°C TJ= 125°C 40TPS.. Series 1 0.5 1 1.5 2 Instantaneous On-state Voltag e (V) Fig. 7 - On-State Voltage Drop Characteristics 10 Rec tangular gate pulse a)Rec ommended load line for rated di/ dt: 20 V, 30 ohms tr = 0.5 µs, tp >= 6 µs b)Rec ommended load line for <= 30% rated di/ dt: 20 V, 65 ohms tr = 1 µs, tp >= 6 µs (1) PGM = 100 W, tp = 500 µs (2) PGM = 50 W, tp = 1 ms (3) PGM = 20 W, tp = 25 ms (4) PGM = 10 W, tp = 5 ms (a) (b) 1 TJ = -40 °C TJ = 125 °C TJ = 25 °C Instantaneous Gate Voltage (V) 100 (4) (3) (2) (1) VGD IGD 0.1 0.001 0.01 40TPS.. 0.1 Frequenc y Limited by PG(AV) 1 10 100 1000 Instantaneous Gate Current (A) Fig. 8 - Gate Characteristics Revision: 06-Feb-14 Document Number: 94389 4 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-40TPS16PbF, VS-40TPS16-M3 Transient Thermal Impeda nc e Z thJC (°C/W) www.vishay.com Vishay Semiconductors 1 Steady State Value (DC Opera tion) D = 0.50 D = 0.33 D = 0.25 D = 0.17 0.1 D = 0.08 Single Pulse 40TPS.. Series 0.01 0.0001 0.001 0.01 0.1 1 Square Wave Pulse Duration (s) Fig. 9 - Thermal Impedance ZthJC Characteristics ORDERING INFORMATION TABLE Device code VS- 40 T P S 16 PbF 1 2 3 4 5 6 7 1 - Vishay Semiconductors product 2 - Current rating (40 = 40 A) 3 - Circuit configuration: T = Thyristor 4 - Package: 5 - 6 - Voltage rating (16 = 1600 V) 7 - Environmental digit: P = TO-247 Type of silicon: S = Standard recovery rectifier PbF = Lead (Pb)-free and RoHS compliant -M3 = Halogen-free, RoHS compliant, and terminations lead (Pb)-free ORDERING INFORMATION (Example) PREFERRED P/N QUANTITY PER T/R MINIMUM ORDER QUANTITY PACKAGING DESCRIPTION VS-40TPS16PbF 25 500 Antistatic plastic tubes VS-40TPS16-M3 25 500 Antistatic plastic tubes LINKS TO RELATED DOCUMENTS Dimensions Part marking information www.vishay.com/doc?95542 TO-247AC PbF www.vishay.com/doc?95226 TO-247AC -M3 www.vishay.com/doc?95007 Revision: 06-Feb-14 Document Number: 94389 5 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Outline Dimensions www.vishay.com Vishay Semiconductors TO-247 - 50 mils L/F DIMENSIONS in millimeters and inches A A (3) (6) Φ P E B (2) R/2 N A2 S (Datum B) Ø K M DBM Φ P1 A D2 Q 2xR (2) D1 (4) D 1 4 D 3 2 Thermal pad (5) L1 C L A See view B 2 x b2 3xb 0.10 M C A M 0.01 M D B M View A - A C 2x e A1 b4 (b1, b3, b5) Plating (4) E1 Base metal D DE (c) c1 E C C (b, b2, b4) (4) Section C - C, D - D, E - E SYMBOL A A1 A2 b b1 b2 b3 b4 b5 c c1 D D1 MILLIMETERS MIN. MAX. 4.65 5.31 2.21 2.59 1.17 1.37 0.99 1.40 0.99 1.35 1.65 2.39 1.65 2.34 2.59 3.43 2.59 3.38 0.38 0.89 0.38 0.84 19.71 20.70 13.08 - INCHES MIN. MAX. 0.183 0.209 0.087 0.102 0.046 0.054 0.039 0.055 0.039 0.053 0.065 0.094 0.065 0.092 0.102 0.135 0.102 0.133 0.015 0.035 0.015 0.033 0.776 0.815 0.515 - View B NOTES SYMBOL 3 4 D2 E E1 e ØK L L1 N ØP Ø P1 Q R S MILLIMETERS MIN. MAX. 0.51 1.35 15.29 15.87 13.46 5.46 BSC 0.254 14.20 16.10 3.71 4.29 7.62 BSC 3.56 3.66 7.39 5.31 5.69 4.52 5.49 5.51 BSC INCHES MIN. MAX. 0.020 0.053 0.602 0.625 0.53 0.215 BSC 0.010 0.559 0.634 0.146 0.169 0.3 0.14 0.144 0.291 0.209 0.224 0.178 0.216 0.217 BSC NOTES 3 Notes (1) Dimensioning and tolerancing per ASME Y14.5M-1994 (2) Contour of slot optional (3) Dimension D and E do not include mold flash. Mold flash shall not exceed 0.127 mm (0.005") per side. These dimensions are measured at the outermost extremes of the plastic body (4) Thermal pad contour optional with dimensions D1 and E1 (5) Lead finish uncontrolled in L1 (6) Ø P to have a maximum draft angle of 1.5 to the top of the part with a maximum hole diameter of 3.91 mm (0.154") (7) Outline conforms to JEDEC® outline TO-247 with exception of dimension c and Q Revision: 21-Apr-15 Document Number: 95542 1 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000