BFT92 PNP 5 GHz wideband transistor Rev. 3 — 22 January 2016 Product data sheet 1. Product profile 1.1 General description PNP transistor in a plastic SOT23 envelope. It is primarily intended for use in RF wideband amplifiers, such as in aerial amplifiers, radar systems, oscilloscopes, spectrum analyzers, etc. The transistor features low intermodulation distortion and high power gain; due to its very high transition frequency, it also has excellent wideband properties and low noise up to high frequencies. NPN complements are BFR92 and BFR92A. 1.2 Features and benefits High power gain Low intermodulation distortion 1.3 Applications Oscilloscopes and spectrum analyzers Radar systems RF wideband amplifiers 1.4 Quick reference data Table 1. Quick reference data Symbol Parameter Conditions Min Typ Max Unit VCBO collector-base voltage open emitter - - 20 V VCEO collector-emitter voltage open base - - 15 V IC DC collector current - - 25 mA Ptot total power dissipation up to Ts = 95 C - - 300 mW fT transition frequency IC = 14 mA; VCE = 10 V; f = 500 MHz - 5 - GHz Cre feedback capacitance IC = 2 mA; VCE = 10 V; f = 1 MHz - 0.7 - pF GUM maximum unilateral power gain IC = 14 mA; VCE = 10 V; f = 500 MHz Tamb = 25 C; - 18 - dB NF noise figure IC = 5 mA; VCE = 10 V; f = 500 MHz; Tamb = 25 C - 2.5 - dB dim intermodulation distortion IC = 14 mA; VCE = 10 V; RL = 75 ; Vo = 150 mV; Tamb = 25 C; f(p + q-r) = 493.25 MHz - 60 - dB [1] Ts is the temperature at the soldering point of the collector tab. [1] BFT92 NXP Semiconductors PNP 5 GHz wideband transistor 2. Pinning information Table 2. Pinning Pin Description 1 base 2 emitter 3 collector Simplified outline Graphic symbol DDD 3. Ordering information Table 3. Ordering information Type number BFT92 Package Name Description Version TO-236AB Plastic surface mounted package; 3 leads SOT23 4. Marking Table 4. Marking codes Type number Marking code BFT92 W1% 5. Limiting values Table 5. Limiting values In accordance with the Absolute Maximum Rating System (IEC 60134). Symbol Parameter Conditions Min Max Unit VCBO collector-base voltage open emitter - 20 V VCEO collector-emitter voltage open base - 15 V VEBO emitter-base voltage open collector IC DC collector current ICM peak collector current f > 1 MHz Ptot total power dissipation up to Ts = 95 C Tstg storage temperature Tj junction temperature [1] BFT92 Product data sheet [1] - 2 V - 25 mA - 35 mA - 300 mW 65 150 C - 175 C Ts is the temperature at the soldering point of the collector tab. All information provided in this document is subject to legal disclaimers. Rev. 3 — 22 January 2016 © NXP Semiconductors N.V. 2016. All rights reserved. 2 of 10 BFT92 NXP Semiconductors PNP 5 GHz wideband transistor 6. Thermal characteristics Table 6. Symbol Rth j-s [1] Thermal characteristics Parameter Conditions thermal resistance from junction to soldering point up to Ts = 95 C [1] Typ Unit 260 K/W Ts is the temperature at the soldering point of the collector tab. 7. Characteristics Table 7. Characteristics Tj = 25 C unless otherwise specified. Symbol Parameter Conditions Min Typ Max Unit ICBO collector cut-off current IE = 0; VCB = 10 V - - 50 hFE DC current gain IC = 14 mA; VCE = 10 V 20 50 - fT transition frequency IC = 14 mA; VCE = 10 V; f = 500 MHz - 5 - Cc collector capacitance IE = ie = 0; VCB = 10 V; f = 1 MHz - 0.75 - pF Ce emitter capacitance IC = ic = 0; VEB = 0.5 V; f = 1 MHz - 0.8 - pF Cre feedback capacitance IC = 2 mA; VCE = 10 V; f = 1 MHz - 0.7 - pF GUM maximum unilateral power gain IC = 14 mA; VCE = 10 V; f = 500 MHz; Tamb = 25 C - 18 - dB NF noise figure IC = 5 mA; VCE = 10 V; f = 500 MHz; Tamb = 25 C - 2.5 - dB Vo output voltage dim = 60 dB (DIN 45004B); IC = 14 mA; VCE = 10 V; RL = 75 ; Vp = Vo at dim = 60 dB; fp = 495.25 MHz; Vq = Vo 6 dB; fq = 503.25 MHz; Vr = Vo 6 dB; fr = 505.25 MHz; measured at f(p+q-r) = 493.25 MHz. - 150 - mV [1] nA GHz 2 [1] S 21 ------------------------------------------------------dB GUM is the maximum unilateral power gain, assuming S12 is zero and G UM = 10 log 2 2 1 – S 11 1 – S 22 BFT92 Product data sheet All information provided in this document is subject to legal disclaimers. Rev. 3 — 22 January 2016 © NXP Semiconductors N.V. 2016. All rights reserved. 3 of 10 BFT92 NXP Semiconductors PNP 5 GHz wideband transistor 8. Graphs DDD 9 K)( ȍ / ȍ Nȍ ȍ S) S) / ȍ / S) '87 ȍ ȍ DDD ,&P$ VCE = 10 V; Tj =25C L2 = L3 = 5 uH Ferroxcube choke, cataloque number 3122 108 20150 L1 = 4 turns 0.35 mm copper wire; winding pitch 1 mm; internal diameter 4 mm Fig 1. Intermodulation distortion test circuit Fig 2. DDD && S) DC current gain as a function of collector current DDD I7 *+] 9&%9 Product data sheet VCE = 10 V; f = 500 MHz; Tj =25C Collector capacitance as a function of collector-base voltage BFT92 O&P$ IE = ie = 0; f = 1 MHz; Tj =25C Fig 3. Fig 4. Transistion frequency as a function of collector current All information provided in this document is subject to legal disclaimers. Rev. 3 — 22 January 2016 © NXP Semiconductors N.V. 2016. All rights reserved. 4 of 10 BFT92 NXP Semiconductors PNP 5 GHz wideband transistor DDD ) G% DDD ) G% ,&P$ Minimum noise figure as a function of collector current. BFT92 Product data sheet I*+] VCE = 10 V; Zs = opt; f = 500 MHz; Tamb = 25C Fig 5. IC = 2 mA; VCE = 10 V; Zs = opt; Tamb = 25C Fig 6. Minimum noise figure as a function of frequency. All information provided in this document is subject to legal disclaimers. Rev. 3 — 22 January 2016 © NXP Semiconductors N.V. 2016. All rights reserved. 5 of 10 BFT92 NXP Semiconductors PNP 5 GHz wideband transistor 9. Package outline Plastic surface-mounted package; 3 leads SOT23 B D A E X HE v A 3 Q A A1 1 c 2 e1 bp w B Lp e detail X 0 1 2 mm scale Dimensions (mm are the original dimensions) Unit mm max nom min A A1 1.1 0.1 0.9 bp c 0.48 0.15 0.38 0.09 D E 3.0 1.4 2.8 e e1 1.9 0.95 1.2 HE Lp Q 2.5 0.45 0.55 2.1 0.15 0.45 v w 0.2 0.1 sot023_po Outline version SOT23 Fig 7. References IEC JEDEC JEITA European projection Issue date 14-06-19 14-09-22 TO-236AB Package outline SOT23 (TO-236AB) BFT92 Product data sheet All information provided in this document is subject to legal disclaimers. Rev. 3 — 22 January 2016 © NXP Semiconductors N.V. 2016. All rights reserved. 6 of 10 BFT92 NXP Semiconductors PNP 5 GHz wideband transistor 10. Revision history Table 8. Revision history Document ID Release date Data sheet status Change notice Supersedes BFT92 v.3 20160122 Product data sheet - BFT92 v.2 Modifications: BFT92 v.2 BFT92 Product data sheet • The format of this data sheet has been redesigned to comply with the new identity guidelines of NXP Semiconductors. • Legal texts have been adapted to the new company name where appropriate. 19921101 Product specification - All information provided in this document is subject to legal disclaimers. Rev. 3 — 22 January 2016 - © NXP Semiconductors N.V. 2016. All rights reserved. 7 of 10 BFT92 NXP Semiconductors PNP 5 GHz wideband transistor 11. Legal information 11.1 Data sheet status Document status[1][2] Product status[3] Definition Objective [short] data sheet Development This document contains data from the objective specification for product development. Preliminary [short] data sheet Qualification This document contains data from the preliminary specification. Product [short] data sheet Production This document contains the product specification. [1] Please consult the most recently issued document before initiating or completing a design. [2] The term ‘short data sheet’ is explained in section “Definitions”. [3] The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product status information is available on the Internet at URL http://www.nxp.com. 11.2 Definitions Draft — The document is a draft version only. The content is still under internal review and subject to formal approval, which may result in modifications or additions. NXP Semiconductors does not give any representations or warranties as to the accuracy or completeness of information included herein and shall have no liability for the consequences of use of such information. Short data sheet — A short data sheet is an extract from a full data sheet with the same product type number(s) and title. A short data sheet is intended for quick reference only and should not be relied upon to contain detailed and full information. For detailed and full information see the relevant full data sheet, which is available on request via the local NXP Semiconductors sales office. In case of any inconsistency or conflict with the short data sheet, the full data sheet shall prevail. Product specification — The information and data provided in a Product data sheet shall define the specification of the product as agreed between NXP Semiconductors and its customer, unless NXP Semiconductors and customer have explicitly agreed otherwise in writing. In no event however, shall an agreement be valid in which the NXP Semiconductors product is deemed to offer functions and qualities beyond those described in the Product data sheet. 11.3 Disclaimers Limited warranty and liability — Information in this document is believed to be accurate and reliable. However, NXP Semiconductors does not give any representations or warranties, expressed or implied, as to the accuracy or completeness of such information and shall have no liability for the consequences of use of such information. NXP Semiconductors takes no responsibility for the content in this document if provided by an information source outside of NXP Semiconductors. In no event shall NXP Semiconductors be liable for any indirect, incidental, punitive, special or consequential damages (including - without limitation - lost profits, lost savings, business interruption, costs related to the removal or replacement of any products or rework charges) whether or not such damages are based on tort (including negligence), warranty, breach of contract or any other legal theory. Notwithstanding any damages that customer might incur for any reason whatsoever, NXP Semiconductors’ aggregate and cumulative liability towards customer for the products described herein shall be limited in accordance with the Terms and conditions of commercial sale of NXP Semiconductors. Right to make changes — NXP Semiconductors reserves the right to make changes to information published in this document, including without limitation specifications and product descriptions, at any time and without notice. This document supersedes and replaces all information supplied prior to the publication hereof. BFT92 Product data sheet Suitability for use — NXP Semiconductors products are not designed, authorized or warranted to be suitable for use in life support, life-critical or safety-critical systems or equipment, nor in applications where failure or malfunction of an NXP Semiconductors product can reasonably be expected to result in personal injury, death or severe property or environmental damage. NXP Semiconductors and its suppliers accept no liability for inclusion and/or use of NXP Semiconductors products in such equipment or applications and therefore such inclusion and/or use is at the customer’s own risk. Applications — Applications that are described herein for any of these products are for illustrative purposes only. NXP Semiconductors makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. Customers are responsible for the design and operation of their applications and products using NXP Semiconductors products, and NXP Semiconductors accepts no liability for any assistance with applications or customer product design. It is customer’s sole responsibility to determine whether the NXP Semiconductors product is suitable and fit for the customer’s applications and products planned, as well as for the planned application and use of customer’s third party customer(s). Customers should provide appropriate design and operating safeguards to minimize the risks associated with their applications and products. NXP Semiconductors does not accept any liability related to any default, damage, costs or problem which is based on any weakness or default in the customer’s applications or products, or the application or use by customer’s third party customer(s). Customer is responsible for doing all necessary testing for the customer’s applications and products using NXP Semiconductors products in order to avoid a default of the applications and the products or of the application or use by customer’s third party customer(s). NXP does not accept any liability in this respect. Limiting values — Stress above one or more limiting values (as defined in the Absolute Maximum Ratings System of IEC 60134) will cause permanent damage to the device. Limiting values are stress ratings only and (proper) operation of the device at these or any other conditions above those given in the Recommended operating conditions section (if present) or the Characteristics sections of this document is not warranted. Constant or repeated exposure to limiting values will permanently and irreversibly affect the quality and reliability of the device. Terms and conditions of commercial sale — NXP Semiconductors products are sold subject to the general terms and conditions of commercial sale, as published at http://www.nxp.com/profile/terms, unless otherwise agreed in a valid written individual agreement. In case an individual agreement is concluded only the terms and conditions of the respective agreement shall apply. NXP Semiconductors hereby expressly objects to applying the customer’s general terms and conditions with regard to the purchase of NXP Semiconductors products by customer. No offer to sell or license — Nothing in this document may be interpreted or construed as an offer to sell products that is open for acceptance or the grant, conveyance or implication of any license under any copyrights, patents or other industrial or intellectual property rights. All information provided in this document is subject to legal disclaimers. Rev. 3 — 22 January 2016 © NXP Semiconductors N.V. 2016. All rights reserved. 8 of 10 BFT92 NXP Semiconductors PNP 5 GHz wideband transistor Export control — This document as well as the item(s) described herein may be subject to export control regulations. Export might require a prior authorization from competent authorities. Quick reference data — The Quick reference data is an extract of the product data given in the Limiting values and Characteristics sections of this document, and as such is not complete, exhaustive or legally binding. Non-automotive qualified products — Unless this data sheet expressly states that this specific NXP Semiconductors product is automotive qualified, the product is not suitable for automotive use. It is neither qualified nor tested in accordance with automotive testing or application requirements. NXP Semiconductors accepts no liability for inclusion and/or use of non-automotive qualified products in automotive equipment or applications. In the event that customer uses the product for design-in and use in automotive applications to automotive specifications and standards, customer (a) shall use the product without NXP Semiconductors’ warranty of the product for such automotive applications, use and specifications, and (b) whenever customer uses the product for automotive applications beyond NXP Semiconductors’ specifications such use shall be solely at customer’s own risk, and (c) customer fully indemnifies NXP Semiconductors for any liability, damages or failed product claims resulting from customer design and use of the product for automotive applications beyond NXP Semiconductors’ standard warranty and NXP Semiconductors’ product specifications. Translations — A non-English (translated) version of a document is for reference only. The English version shall prevail in case of any discrepancy between the translated and English versions. 11.4 Trademarks Notice: All referenced brands, product names, service names and trademarks are the property of their respective owners. 12. Contact information For more information, please visit: http://www.nxp.com For sales office addresses, please send an email to: [email protected] BFT92 Product data sheet All information provided in this document is subject to legal disclaimers. Rev. 3 — 22 January 2016 © NXP Semiconductors N.V. 2016. All rights reserved. 9 of 10 BFT92 NXP Semiconductors PNP 5 GHz wideband transistor 13. Contents 1 1.1 1.2 1.3 1.4 2 3 4 5 6 7 8 9 10 11 11.1 11.2 11.3 11.4 12 13 Product profile . . . . . . . . . . . . . . . . . . . . . . . . . . 1 General description . . . . . . . . . . . . . . . . . . . . . 1 Features and benefits . . . . . . . . . . . . . . . . . . . . 1 Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Quick reference data . . . . . . . . . . . . . . . . . . . . 1 Pinning information . . . . . . . . . . . . . . . . . . . . . . 2 Ordering information . . . . . . . . . . . . . . . . . . . . . 2 Marking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Limiting values. . . . . . . . . . . . . . . . . . . . . . . . . . 2 Thermal characteristics . . . . . . . . . . . . . . . . . . 3 Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Graphs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Package outline . . . . . . . . . . . . . . . . . . . . . . . . . 6 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . 7 Legal information. . . . . . . . . . . . . . . . . . . . . . . . 8 Data sheet status . . . . . . . . . . . . . . . . . . . . . . . 8 Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Disclaimers . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Trademarks. . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Contact information. . . . . . . . . . . . . . . . . . . . . . 9 Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Please be aware that important notices concerning this document and the product(s) described herein, have been included in section ‘Legal information’. © NXP Semiconductors N.V. 2016. All rights reserved. For more information, please visit: http://www.nxp.com For sales office addresses, please send an email to: [email protected] Date of release: 22 January 2016 Document identifier: BFT92