Spansion ® e.MMC Flash Memory for Embedded Platforms e.MMC Managed NAND Flash Memory from the Embedded Market Leader key features suitable applications 8GB – 16GB Densities Consumer e.MMC 4.51 compliant (JESD84-B451) Industrial Spansion e.MMC products are tailored for embedded platforms. These products complement Spansion’s NOR and SLC NAND product offerings. The integrated controller on Spansion e.MMC products perform complex flash management, error correction and wear leveling to reduce the complexities that come with designing in a NAND solution. The controller and its custom Spansion firmware boost the overall performance and quality of the product. Power Supply • 3.3V Core • 3.3V/1.8V IO Medical Networking Industry Standard Packages • 153 ball VFBGA (0.5mm ball pitch) • 100 ball LBGA (1.0mm ball pitch) Temperature Options • Embedded (-25°C to +85°C) • Industrial (-40°C to +85°C) Spansion e.MMC products come with tools, collateral and qualification data that will simplify design cycles and expedite time to market. They also offer features such as direct boot, configurability of pseudo-SLC and MLC partitions, protection from power loss, and health monitoring. Sequential Performance • Read up to 125MB/sec • Write up to 20MB/sec Spansion’s e.MMC product portfolio is compatible with the JEDEC e.MMC 4.51 (JESD84-B451) specifications. They are available in 8GB and 16GB densities, and 153 ball VFBGA (0.5mm ball pitch) and 100 ball LBGA (1.0mm ball pitch) package options. These products are qualified and tested through stringent processes to meet Spansion’s world class quality requirements. *Based on 16GB configuration Information on product availability can be found in the Spansion Product Selector Guide. e.mmc benefits > > Integrated flash management JEDEC standard packages > JEDEC standard interface > Optimized read and write performance > Configurable into pseudo-SLC or MLC partitions Raw NAND Solution e.MMC Solution Processor Processor Block Management Driver Wear Leveling MMC I/F ECC Driver MMC Controller Block Management NAND I/F Wear Leveling ECC NAND NAND I/F NAND e.MMC Printers datasheet summary Compatibility • e.MMC 4.51 compliant (JESD84-B451) • Backwards compatible with previous e.MMC specifications > Key Supported Features • Boot Operation • Partition Management • Boot Area Partition • Replay Protected Memory Block (RPMB) • Sleep (CMD5) •Sanitize •Trim • High Priority Interrupt • Background Operation • Hardware Reset •HS200 • Health Monitoring • Field Firmware Update > Density • 8GB / 16GB > Supply Voltage • Vccq: 1.7V-1.95V or 2.7V-3.6V • Vcc: 2.7V-3.6V > Operating Temperature Range • Embedded: -25°C to +85°C • Industrial: -40°C to +85°C > Package Options • 153-ball VFBGA (13 mm x 11.5 mm x 1.0 mm) • 100-ball LBGA (18 mm x 14 mm x 1.4 mm) > Performance • Sequential Read (MB/s): 125 • Sequential Write (MB/s): 20 • Random Read (IOPS): 6500 • Random Write (IOPS): 1400 > Electronic Signature • Manufacturing ID: 01h > Data Bus Width • 1 bit, 4 bit, 8 bit > *Based on 16GB device. Bus in x8 I/O and HS200 modes • Boot time – Maximum 150ms latency for the first data stream Clock Frequency • 52 MHz (SDR or DDR modes), 200 MHz (SDR mode) > ordering part number guide Density 008 = 8GB 016 = 16GB Family Density Family S4041 e.MMC Temperature Grade W = Embedded (-25°C to +85°C) I = Industrial (-40°C to +85°C) Controller B1 = e.MMC 4.51 Revision Revision 1 = MLC NAND Controller Package Temp Package B1 = VFBGA 153, 13mm x 11.5mm B2 = LBGA 100, 18mm x 14mm Packaging Type 0 = Tray 3 = 13” Tape and Reel Model Number Packing Type Model Number 00 = 1 NAND Die 01 = 2 NAND Die Spansion: 915 DeGuigne Drive, PO Box 3453, Sunnyvale, CA 94088-3453 USA +1 (408) 962-2500 | 1 866 SPANSION | www.spansion.com © 2014 Spansion®, the Spansion logo, MirrorBit®, MirrorBit® Eclipse™ and combinations thereof, are trademarks and registered trademarks of Spansion LLC in the United States and other countries. Other names used are for informational purposes only and may be trademarks of their respective owners. www.facebook.com/spansion twitter: @Spansion, @SpansionService, @SpansionAuto www.youtube.com/spansioninc www.linkedin.com/company/spansion