PBB9C Series FEATURES • • • • DIN rail mount attachment AC187-528V wide input range Peak load output current High current surge 300% SPECIFICATIONS ENVIRONMENTAL INPUT Voltage 187-528Vac 1ph or 265-746Vdc. Frequency 47-63Hz. Input current 240VAC - 0.55A typ for 50W units 240VAC - 0.80A typ for 75W units 240VAC - 1.10A typ for 200W units 480VAC - 0.30A typ for 50W units 480VAC - 0.45A typ for 75W units 480VAC - 0.55A typ for 200W units Inrush current Leakage current 240VAC - 25A typ at cold start (at room temperature) 480VAC - 50A typ 0.75mA (60Hz according to IEC60950). OUTPUT Operating temperature -10°C to +70°C max depending on orientation and airflow Storage temperature -20°C to +75°C. Cooling method Convectional cooling Humidity 20 to 90% RH(Non-condensing) Altitude 3,000m (10,000feet) max. Vibration 10 to 55Hz 2G 3 minutes period, 60minutes each along X,Y and Z axis. 20G 11ms, once each X,Y and Z axis. Option with DIN rail attachment (N1) is only for Impact STANDARDS Safety standards UL60950-1, C-UL, EN60950-1, EN50178 (J and L model). Power 50W, 75W or 200W. Voltage 24VDC. C-Tick AS/NZS CISPR11 Group 1 Class A. Overvoltage protection Works at 115% - 140% of rating. EMC standards EN61000-4-2,-3,-4,-5,-6,-8,-11 Overcurrent protection Works over 105%. EMI standards FCC-A, CISPR11-A, EN55011-A Line regulation 96mV max. CE Marking Complies with LVD and EMC Directives Load regulation Constant current: 150mV max. Peak current: 480mv max. 0 to +50°C: 680mV p-p. -10 to 0°C: 720mV p-p. Ripple noise MECHANICAL Dimensions PBB9C-24J: 50x125x124mm (WxHxD) PBB9C-24L: 65x125x124mm (WxHxD) PBB9C-24E: 150x125x125mm (WxHxD) Temperature regulation -10 to +50°C: 600mV max. Drift 100mV max. Start up time 800ms max (ACIN 240V, I0= 100%) Hold up time 10ms (ACIN 240V, I0= 100%) Efficiency 240VAC - 82% 480VAC - 78% PBB9C-24J 24V Operating Indication LED (green) PBB9C-24L 24V Peak load 150 msec, 35% duty cycle PBB9C-24E 24V Doc. No. PBC9 Rev.C 29-3-12 AC/DC DIN RAIL MOUNTABLE 50-200W SINGLE OUTPUT AC/DC DIN RAIL SELECTION TABLE NUMBER MODEL EFF. MAX POWER 2.1A 6.7A 150ms 680mV 82% 50W 3.1A 10A 150ms 680mV 82% 75W 8.4A 42A 50ms 680mV 82% 200W OUTPUT Powering Progress – www.powerbox.com.au PEAK RIPPLE & CURRENT NOISE 363