Data sheet HT 120 LF

product details
HT 120/230-240/12 LF UNV1
Product description:
EAN/ Product:
Quantity:
HT 120/230-240/12 LF UNV1
4050300461342
Unpacked (UNV) contains 1 Piece (PCE)
You can find this product in the eCatalog:
http://catalog.myosram.com?~language=EN&~country=EN&it_p=4050300461342
Applications
Dimmable
Yes
Dimmer
trailing edge phase control
Type of protection
IP20
Protection against ignition and fire
MM
Short-circuit protection
automatic reversible
Overload protection
automatic reversible
Overtemperature protection
automatic reversible
General Description
Design / version
flat with casing
SEG no.
5280335
Standards
acc. to EN 55015 | acc. to EN 61000-3-2 | acc. to EN 61547 | acc. to IEC 61347 |
acc.to EN 61047
Sstl-Number
4031025
Technical - Electrical Data
Operating frequency
≈ 50 kHz
Mains frequency
50 Hz
Device power loss
... 6 W 1)
Lamp wattage
35 ... 120 W
Power factor c
0.95
Nominal voltage
230-240 V
Output voltage
11.5 (120 W)/11.5 (35 W) V
IP inrush current
2A
Max. no. of ECGs on circuit breaker 10A
16
Max. no. of ECGs on circuit breaker 16A
21
Technical - Geometries
Mounting hole spacing, length
164 mm
Width
42 mm
Height
20 mm
Wire preparation length, output side
cable sheath 15 mm, wire 7 mm
Wire preparation length, input side
cable sheath 15 mm, wire 7 mm
Length
172 mm
Max. cable length - system in meters
2m
Technical - Temperatures
Max. casing temp. in case of fault
110 °C
Max. operating temp. at the Tc point
80 °C
Ambient temperature range
-20 ... +45 °C
Storage temperature
-40 ... 85 °C
Relative humidity
5 ... 85 % 2)
product details
HT 120/230-240/12 LF UNV1
Packaging units
EAN
Packaging type and content
Dimensions in h x w x l
Gross weight
Volume
4050300461342
Unpacked contains 1 Piece
42,000 mm x 20,000 mm x 172,000 mm
129,000 g (0,000 g)
0,144 Cubic
dec.
4050300461359
Shipping carton box contains 20 Piece
222,000 mm x 86,000 mm x 351,000 mm
2.930,000 g (0,000 g)
5,299 Cubic
dec.
1)
maximum
2)
max. 56 d/y at 85%
product details
HT 120/230-240/12 LF UNV1
Abmantelungsvorschrift: / Instructions for the removal of isolation: