HIGH PERFORMANCE DIFFERENTIAL OSCILLATOR

PETERMANN-TECHNIK GmbH
Lechwiesenstr. 13 ∙ D-86899 ∙ Landsberg am Lech
Tel: +49/8191/305395 ∙ Fax: +49/8191/305397
[email protected] ∙ www.petermann-technik.com
HIGH PERFORMANCE DIFFERENTIAL OSCILLATOR
SERIES „DLPO-2“
220.0—800.0 MHz
FEATURES
APPLICATIONS
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
100% pin-to-pin drop-in replacement to quartz and MEMS based XO
Differential Oscillator for Low Cost
LVCMOS, LVPECL, LVDS and CML output signal possible
Low Power Consumption
Excellent low RMS phase jitter
Excellent long time reliability
Very tight frequency stability as low as ±10 ppm
Outstanding long term aging
Standard housings: 5.0x3.2; 7.0x5.0 mm
Pb-free, RoHS and REACH compliant / MSL1@260°C
Server, Router, RAID controller
Gigabit Ethernet, 10 Gigabit Ethernet, Fiber Channel
SATA / SAS,PCI-Express, Fully Buffered DIMM
System clock, Networking and computing,
etc.
PIN DESCRIPTION
PIN
SYMBOL
1
OE/ST
2
NC
TOP VIEW
FUNCTIONALITY
Input
NA
Standby or Output Enable pin for OUT+ and OUT-.
OE:
When High or Open : OUT+ and OUT- = active
When Low : OUT+ and OUT- = High Impedance state
ST:
When High or Open : OUT+ and OUT- = active
When Low : OUT+ and OUT- = High Impedance State
OE/ST
1
6
VDD
NC
2
5
OUT-
GND
3
4
OUT+
Do not connect pin, leave it floating.
3
GND
Power
VDD Power Supply Ground. Connect to Ground
4
OUT+
Output
220 to 800 MHz programmable clock output.
5
OUT-
Output
6
VDD
Power
Power Supply Voltage
CRYSTALS ∙ OSCILLATORS ∙ CERAMIC RESONATORS ∙ CERAMIC FILTERS ∙ SAW COMPONENTS
PAGE 1 OF 13 I SPEC 01 I REV.00 I NOVEMBER 2014
PETERMANN-TECHNIK GmbH
Lechwiesenstr. 13 ∙ D-86899 ∙ Landsberg am Lech
Tel: +49/8191/305395 ∙ Fax: +49/8191/305397
[email protected] ∙ www.petermann-technik.com
DC ELECTRICAL SPECIFICATIONS
LVCMOS input, OE or ST pin, 3.3V ±10% or 2.5V ±10% or 1.8V ±5%, -40 to 85°C
PARAMETER
SYMBOL
MIN.
TYP.
MAX.
UNIT
Input High Voltage
VIH
70
–
–
%VDD
CONDITION
Input Low Voltage
VIL
–
–
30
%VDD
Input High Current
IIH
–
–
10
µA
OE or ST pin
Input Low Current
IIL
-10
–
–
µA
OE or ST pin
Power Up Time
Tpu
–
–
10
ms
Time from minimum power supply voltage to the first cycle
(Guaranteed no runt pulses)
LVPECL Output, 3.3V ±10% or 2.5V ±10%, -40 to 85°C
PARAMETER
SYMBOL
MIN.
TYP.
MAX.
UNIT
Supply Voltage
VDD
2.97
3.3
3.63
V
2.25
2.5
2.75
V
Supply Current
IDD
–
68
74
mA
VDD = 3.3, Excluding Load Termination Current
–
65
71
mA
VDD = 2.5, Excluding Load Termination Current
Output High Voltage
VOH
VDD-1.1
–
VDD-0.7
V
Output Low Voltage
VOL
VDD-2.0
–
VDD-1.4
V
Vswing
600
800
1000
mV
Pk-Pk Output Voltage Swing
CONDITION
50 Ohm termination to Vdd - 2.0V See Figure 1, 2.
LVDS Output, 3.3V ±10% or 2.5V ±10%, -40 to 85°C
PARAMETER
SYMBOL
MIN.
TYP.
MAX.
UNIT
Supply Voltage
VDD
2.97
3.3
3.63
V
2.25
2.5
2.75
V
Supply Current
IDD
–
73
79
mA
VDD = 3.3, Excluding Load Termination Current
–
70
76
mA
VDD = 2.5, Excluding Load Termination Current
VOD1
250
350
450
mV
Swing Mode = Normal Single load termination. See Figure 4.
ΔVOD1
–
–
50
mV
VOS1
–
1.2
–
V
ΔVOS1
–
–
50
mV
Differential Output Voltage
VOD Magnitude Change
Offset Voltage
VOS Magnitude Change
Differential Output Voltage
VOD Magnitude Change
Offset Voltage
VOD2
500
700
900
mV
ΔVOD2
–
–
50
mV
VOS2
–
1.2
–
V
VOS Magnitude Change
ΔVOS2
–
–
50
mV
Differential Output Voltage
VOD3
250
350
450
mV
ΔVOD3
–
–
50
mV
VOS3
–
1.2
–
V
ΔVOS3
–
–
50
mV
VOD Magnitude Change
Offset Voltage
VOS Magnitude Change
CRYSTALS ∙ OSCILLATORS ∙ CERAMIC RESONATORS ∙ CERAMIC FILTERS ∙ SAW COMPONENTS
CONDITION
Swing Mode = High Single load termination. See Figure 4.
Swing Mode = High Double load termination. See Figure 5.
PAGE 2 OF 13 I SPEC 01 I REV.00 I NOVEMBER 2014
PETERMANN-TECHNIK GmbH
Lechwiesenstr. 13 ∙ D-86899 ∙ Landsberg am Lech
Tel: +49/8191/305395 ∙ Fax: +49/8191/305397
[email protected] ∙ www.petermann-technik.com
DC ELECTRICAL SPECIFICATIONS
CML Output, 3.3V ±10% or 2.5V ±10% or 1.8V ±5%, -40 to 85°C
PARAMETER
Supply Voltage
Supply Current
SYMBOL
MIN.
TYP.
MAX.
UNIT
VDD
2.97
3.3
3.63
V
2.25
2.5
2.75
V
1.71
1.8
1.89
V
–
48
51
mA
VDD = 3.3V
–
47
50
mA
VDD = 2.5V
–
38
41
mA
VDD = 1.8V
–
VDD
IDD
Output High Voltage
VOH1
VDD-0.1
Output Low Voltage
VOL1
VDD-
Pk-Pk Output Voltage Swing
0.55
VDD-
0.425
VDD-
0.3
V
300
425
550
mV
Output High Voltage
VOH2
VDD-0.1
–
VDD
V
Output Low Voltage
VOL2
VDD-
VDD-
V
Pk-Pk Output Voltage Swing
VDD-
0.85
0.6
Vswing2
600
850
1100
mV
Output High Voltage
VOH3
VDD-0.1
–
VDD
V
Output Low Voltage
VOL3
VDD-
VDD-
V
Pk-Pk Output Voltage Swing
Vswing3
0.55
300
VDD-
0.425
425
CRYSTALS ∙ OSCILLATORS ∙ CERAMIC RESONATORS ∙ CERAMIC FILTERS ∙ SAW COMPONENTS
0.3
550
Excluding Load
Termination
Current
Swing Mode = Normal Single Load Termination See Figure 6.
V
Vswing1
1.1
CONDITION
Swing Mode = High Single Load Termination See Figure 6.
Swing Mode = High Double Load Termination See Figure 7.
mV
PAGE 3 OF 13 I SPEC 01 I REV.00 I NOVEMBER 2014
PETERMANN-TECHNIK GmbH
Lechwiesenstr. 13 ∙ D-86899 ∙ Landsberg am Lech
Tel: +49/8191/305395 ∙ Fax: +49/8191/305397
[email protected] ∙ www.petermann-technik.com
AC ELECTRICAL SPECIFICATIONS
LVPECL Output, 3.3V ±10%, -40 to 85°C
PARAMETER
SYMBOL
MIN.
TYP.
MAX.
UNIT
Output Frequency
Fout
220
–
800
MHz
Frequency Stability
Fstab
-10
–
+10
PPM
-15
–
+15
PPM
-20
–
+20
PPM
+25
PPM
-25
-50
CONDITION
Inclusive of initial stability, operating
temp., rated power supply voltage
change, load change
0 to 70°C
-20 to 70°C
-40 to 85°C
+50
PPM
Aging
Fage
–
–
1
PPM
Duty Cycle
DC
45
–
55
%
Fout= 220 - 460 MHz, 490 - 610 MHz or 750 - 800 MHz
35
–
65
%
Fout= 460.1 - 489.9 MHz or 610.1- 749.9 MHz
Output Rise/Fall Time
tR/tF
160
260
350
ps
20% to 80%
RMS Phase Jitter (random)
PHJ
–
0.3
0.44
ps
Fout= 212.5MHz @ BW: 1.875M Hz to10 MHz
–
0.3
0.33
ps
Fout= 312.5 MHz @ BW: 1.875M Hz to10 MHz
–
0.3
0.34
ps
Fout= 600 MHz @ BW: 1.875M Hz to10 MHz
–
1.4
1.8
ps
Fout= 212.5 MHz
–
1.4
1.8
ps
Fout= 312.5 MHz
–
1.5
2.2
ps
Fout= 600 MHz
–
1.2
1.6
ps
Fout= 800 MHz
RMS Period Jitter
PJ
First year @ 25°C
LVPECL Output, 2.5V ±10%, -40 to 85°C
PARAMETER
SYMBOL
MIN.
TYP.
MAX.
UNIT
Output Frequency
Fout
220
–
800
MHz
Frequency Stability
Fstab
-10
–
+10
PPM
-15
–
+15
PPM
-20
–
+20
PPM
+25
PPM
-25
-50
CONDITION
Inclusive of initial stability, operating
temp., rated power supply voltage
change, load change
0 to 70°C
-20 to 70°C
-40 to 85°C
+50
PPM
Aging
Fage
–
–
1
PPM
Duty Cycle
DC
45
–
55
%
Fout= 220 - 460 MHz, 490 - 610 MHz or 750 - 800 MHz
35
–
65
%
Fout= 460.1 - 489.9 MHz or 610.1- 749.9 MHz
First year @ 25°C
Output Rise/Fall Time
tR/tF
160
260
350
ps
20% to 80%
RMS Phase Jitter (random)
PHJ
–
0.3
0.44
ps
Fout= 212.5MHz @ BW: 1.875MHz to10 MHz
–
0.3
0.33
ps
Fout= 312.5 MHz @ BW: 1.875MHz to10 MHz
–
0.3
0.34
ps
Fout= 600 MHz @ BW: 1.875MHz to10 MHz
–
1.4
1.8
ps
Fout= 212.5 MHz
–
1.4
1.8
ps
Fout= 312.5 MHz
–
1.5
2.2
ps
Fout= 600 MHz
–
1.2
1.6
ps
Fout= 800 MHz
RMS Period Jitter
PJ
CRYSTALS ∙ OSCILLATORS ∙ CERAMIC RESONATORS ∙ CERAMIC FILTERS ∙ SAW COMPONENTS
PAGE 4 OF 13 I SPEC 01 I REV.00 I NOVEMBER 2014
PETERMANN-TECHNIK GmbH
Lechwiesenstr. 13 ∙ D-86899 ∙ Landsberg am Lech
Tel: +49/8191/305395 ∙ Fax: +49/8191/305397
[email protected] ∙ www.petermann-technik.com
AC ELECTRICAL SPECIFICATIONS
LVDS Output, 3.3V ±10%, -40 to 85°C
PARAMETER
SYMBOL
MIN.
TYP.
MAX.
UNIT
Output Frequency
Fout
220
–
800
MHz
Frequency Stability
Fstab
-10
–
+10
PPM
-15
–
+15
PPM
-20
–
+20
PPM
-25
–
+25
PPM
-50
–
+50
PPM
CoNdition
Inclusive of initial stability, operating
temp., rated power supply voltage
change, load change
0 to 70°C
-20 to 70°C
-40 to 85°C
Aging
Fage
–
–
1
PPM
First year @ 25°C
Duty Cycle
DC
45
–
55
%
Fout= 220 - 460 MHz, 490 - 610 MHz or 750 - 800 MHz
35
–
65
%
Fout= 460.1 - 489.9 MHz or 610.1- 749.9 MHz
Output Rise/Fall Time
tR/tF
240
310
420
ps
20% to 80%
RMS Phase Jitter (random)
PHJ
–
0.4
0.8
ps
Fout= 212.5MHz @ BW: 1.875M Hz to10 MHz
–
0.3
0.6
ps
Fout= 312.5 MHz @ BW: 1.875M Hz to10 MHz
–
0.2
0.4
ps
Fout= 600 MHz @ BW: 1.875M Hz to10 MHz
–
1.8
2.5
ps
Fout= 212.5 MHz
–
1.7
2.4
ps
Fout= 312.5 MHz
–
1.7
2.5
ps
Fout= 600 MHz
–
1.5
2.2
ps
Fout= 800 MHz
SYMBOL
MIN.
TYP.
MAX.
UNIT
Output Frequency
Fout
220
–
800
MHz
Frequency Stability
Fstab
-10
–
+10
PPM
-15
–
+15
PPM
-20
–
RMS Period Jitter
PJ
LVDS Output, 2.5V ±10%, -40 to 85°C
PARAMETER
+20
PPM
-25
+25
PPM
-50
+50
PPM
CONDITION
Inclusive of initial stability, operating
temp., rated power supply voltage
change, load change
0 to 70°C
-20 to 70°C
-40 to 85°C
Aging
Fage
–
–
1
PPM
Duty Cycle
DC
45
–
55
%
First year @ 25°C
Fout= 220 - 460 MHz, 490 - 610 MHz or 750 - 800 MHz
35
–
65
%
Fout= 460.1 - 489.9 MHz or 610.1- 749.9 MHz
Output Rise/Fall Time
tR/tF
240
310
420
ps
20% to 80%
RMS Phase Jitter (random)
PHJ
–
0.4
0.8
ps
Fout= 212.5MHz @ BW: 1.875MHz to10 MHz
–
0.3
0.6
ps
Fout= 312.5 MHz @ BW: 1.875MHz to10 MHz
–
0.2
0.4
ps
Fout= 600 MHz @ BW: 1.875MHz to10 MHz
–
1.7
2.4
ps
Fout= 212.5 MHz
–
1.7
2.5
ps
Fout= 312.5 MHz
–
1.6
2.1
ps
Fout= 600 MHz
–
1.4
1.8
ps
Fout= 800 MHz
RMS Period Jitter
PJ
CRYSTALS ∙ OSCILLATORS ∙ CERAMIC RESONATORS ∙ CERAMIC FILTERS ∙ SAW COMPONENTS
PAGE 5 OF 13 I SPEC 01 I REV.00 I NOVEMBER 2014
PETERMANN-TECHNIK GmbH
Lechwiesenstr. 13 ∙ D-86899 ∙ Landsberg am Lech
Tel: +49/8191/305395 ∙ Fax: +49/8191/305397
[email protected] ∙ www.petermann-technik.com
AC ELECTRICAL SPECIFICATIONS
CML Output, 3.3V ±10%, -40 to 85°C
PARAMETER
SYMBOL
MIN.
TYP.
MAX.
UNIT
Output Frequency
Fout
220
–
800
MHz
Frequency Stability
Fstab
-10
–
+10
PPM
-15
–
+15
PPM
-20
–
+20
PPM
-25
+25
PPM
-50
+50
PPM
CONDITION
Inclusive of initial stability, operating
temp., rated power supply voltage
change, load change
0 to 70°C
-20 to 70°C
-40 to 85°C
Aging
Fage
–
–
1
PPM
Duty Cycle
DC
45
–
55
%
First year @ 25°C
Fout= 220 - 460 MHz, 490 - 610 MHz or 750 - 800 MHz
35
–
65
%
Fout= 460.1 - 489.9 MHz or 610.1- 749.9 MHz
Output Rise/Fall Time
tR/tF
270
350
470
ps
20% to 80%
RMS Phase Jitter (random)
PHJ
–
0.47
0.53
ps
Fout= 212.5MHz @ BW: 1.875M Hz to10 MHz
–
0.32
0.42
ps
Fout= 312.5 MHz @ BW: 1.875M Hz to10 MHz
–
0.26
0.34
ps
Fout= 600 MHz @ BW: 1.875M Hz to10 MHz
–
1.7
2.1
ps
Fout= 212.5 MHz
–
1.7
2.1
ps
Fout= 312.5 MHz
–
1.7
2.2
ps
Fout= 600 MHz
–
1.4
1.8
ps
Fout= 800 MHz
RMS Period Jitter
PJ
CML, 2.5V ± 10%, -40 to 85°C
Parameter
Symbol
Min.
Typ.
Max.
Unit
Output Frequency
Fout
220
–
800
MHz
Frequency Stability
Fstab
-10
–
+10
PPM
-15
–
+15
PPM
-20
–
+20
PPM
-25
+25
PPM
-50
+50
PPM
Condition
Inclusive of initial stability, operating
temp., rated power supply voltage
change, load change
0 to 70°C
-20 to 70°C
-40 to 85°C
Aging
Fage
–
–
1
PPM
Duty Cycle
DC
45
–
55
%
First year @ 25°C
Fout= 220 - 460 MHz, 490 - 610 MHz or 750 - 800 MHz
35
–
65
%
Fout= 460.1 - 489.9 MHz or 610.1- 749.9 MHz
Output Rise/Fall Time
tR/tF
270
350
470
ps
20% to 80%
RMS Phase Jitter (random)
PHJ
–
0.47
0.53
ps
Fout= 212.5MHz @ BW: 1.875MHz to10 MHz
–
0.32
0.38
ps
Fout= 312.5 MHz @ BW: 1.875MHz to10 MHz
–
0.26
0.34
ps
Fout= 600 MHz @ BW: 1.875MHz to10 MHz
–
1.7
2.1
ps
Fout= 212.5 MHz
–
1.7
2.1
ps
Fout= 312.5 MHz
–
1.7
2.2
ps
Fout= 600 MHz
–
1.4
1.8
ps
Fout= 800 MHz
RMS Period Jitter
PJ
CRYSTALS ∙ OSCILLATORS ∙ CERAMIC RESONATORS ∙ CERAMIC FILTERS ∙ SAW COMPONENTS
PAGE 6 OF 13 I SPEC 01 I REV.00 I NOVEMBER 2014
PETERMANN-TECHNIK GmbH
Lechwiesenstr. 13 ∙ D-86899 ∙ Landsberg am Lech
Tel: +49/8191/305395 ∙ Fax: +49/8191/305397
[email protected] ∙ www.petermann-technik.com
AC ELECTRICAL SPECIFICATIONS
CML, 1.8V ± 5%, -40 to 85°C
PARAMETER
SYMBOL
MIN.
TYP.
MAX.
UNIT
Output Frequency
Fout
220
–
800
MHz
Frequency Stability
Fstab
-15
–
+15
PPM
-20
+20
PPM
-25
–
+25
PPM
-50
+50
PPM
CONDITION
Inclusive of initial stability, operating
temp., rated power supply voltage
change, load change
0 to 70°C
-20 to 70°C
-40 to 85°C
Aging
Fage
–
–
1
PPM
Duty Cycle
DC
45
–
55
%
First year @ 25°C
Fout= 220 - 460 MHz, 490 - 610 MHz or 750 - 800 MHz
35
–
65
%
Fout= 460.1 - 489.9 MHz or 610.1- 749.9 MHz
Output Rise/Fall Time
tR/tF
270
350
470
ps
20% to 80%
RMS Phase Jitter (random)
PHJ
–
0.47
0.53
ps
Fout= 212.5MHz @ BW: 1.875MHz to10 MHz
–
0.32
0.42
ps
Fout= 312.5 MHz @ BW: 1.875MHz to10 MHz
–
0.26
0.34
ps
Fout= 600 MHz @ BW: 1.875MHz to10 MHz
–
1.9
2.3
ps
Fout= 212.5 MHz
–
1.8
2.2
ps
Fout= 312.5 MHz
–
1.7
2.3
ps
Fout= 600 MHz
–
1.6
1.9
ps
Fout= 800 MHz
RMS Period Jitter
PJ
CRYSTALS ∙ OSCILLATORS ∙ CERAMIC RESONATORS ∙ CERAMIC FILTERS ∙ SAW COMPONENTS
PAGE 7 OF 13 I SPEC 01 I REV.00 I NOVEMBER 2014
PETERMANN-TECHNIK GmbH
Lechwiesenstr. 13 ∙ D-86899 ∙ Landsberg am Lech
Tel: +49/8191/305395 ∙ Fax: +49/8191/305397
[email protected] ∙ www.petermann-technik.com
TERMINATION DIAGRAMS
FIGURE 1. LVPECL AC COUPLED TYPICAL TERMINATION (LVPECL-0)
VDD= 3.3V => R1 = 150 Ω
VDD= 2.5V => R1 = 120 Ω
VDD
OUT+
Z0 = 50 Ω
D+
100nF
Receiver Device
Drive Device
100nF
OUT-
Z0 = 50 Ω
R1
D-
R1
50 Ω
50 Ω
VTT
FIGURE 2. LVPECL DC COUPLED TYPICAL TERMINATION WITH TERMINATION VOLTAGE
(LVPECL-1)
VDD
OUT+
Z0 = 50 Ω
D+
Receiver Device
Drive Device
OUT-
Z0 = 50 Ω
D50 Ω
50 Ω
VTT = VDD - 2.0
FIGURE 3. LVPECL DC COUPLED TYPICAL TERMINATION WITHOUT TERMINATION VOLTAGE
(LVPECL-1)
VDD = 3.3V => R1 = R3 = 133 Ω and
R2 = R4 = 82 Ω
VDD = 2.5V => R1 = R3 = 250 Ω and
R2 = R4 = 62.5 Ω
VDD
OUT+
VDD
R1
R3
Z0 = 50 Ω
D+
Drive Device
OUT-
Receiver Device
Z0 = 50 Ω
DR2
CRYSTALS ∙ OSCILLATORS ∙ CERAMIC RESONATORS ∙ CERAMIC FILTERS ∙ SAW COMPONENTS
R4
PAGE 8 OF 13 I SPEC 01 I REV.00 I NOVEMBER 2014
PETERMANN-TECHNIK GmbH
Lechwiesenstr. 13 ∙ D-86899 ∙ Landsberg am Lech
Tel: +49/8191/305395 ∙ Fax: +49/8191/305397
[email protected] ∙ www.petermann-technik.com
TERMINATION DIAGRAMS
FIGURE 4. LVDS SINGLE TERMINATION (LOAD TERMINATED)
OUT+
Z0 = 50 Ω
D+
Drive Device
100 Ω
OUT-
Receiver Device
Z0 = 50 Ω
D-
FIGURE 5. LVDS DOUBLE TERMINATION (SOURCE + LOAD TERMINATED)
OUT+
A
Drive Device
Z0 = 50 Ω
B
100 Ω
100 Ω
A
OUT-
Receiver Device
B
Z0 = 50 Ω
D+
D-
Note: For AC coupled operation, include/insert decoupling caps at points A or B
FIGURE 6. CML SINGLE LOAD TERMINATION
VDD
OUT+
Z0 = 50 Ω
D+
Receiver Device
Drive Device
OUT-
Z0 = 50 Ω
D50 Ω
50 Ω
VDD ≤ VT ≤ 3.63V
CRYSTALS ∙ OSCILLATORS ∙ CERAMIC RESONATORS ∙ CERAMIC FILTERS ∙ SAW COMPONENTS
PAGE 9 OF 13 I SPEC 01 I REV.00 I NOVEMBER 2014
PETERMANN-TECHNIK GmbH
Lechwiesenstr. 13 ∙ D-86899 ∙ Landsberg am Lech
Tel: +49/8191/305395 ∙ Fax: +49/8191/305397
[email protected] ∙ www.petermann-technik.com
TERMINATION DIAGRAMS
FIGURE 7. CML DOUBLE LOAD TERMINATION
OUT+
A
Z0 = 50 Ω
B
D+
Receiver Device
Driver Device
A
OUT-
B
Z0 = 50 Ω
D-
50 Ω
50 Ω
50 Ω
VDD ≤ VT1 ≤ 3.63V
50 Ω
VDD ≤ VT2 ≤ 3.63V
Notes:
1. For DC-coupled operation, VT1 = VT2
2. For AC coupled operation, include/insert decoupling caps at points A o r B
3. For AC-coupled operation with capacitors p laced at point A, VT2 sets the input common m ode of Receiver Device and
need not to be related to VT1
CRYSTALS ∙ OSCILLATORS ∙ CERAMIC RESONATORS ∙ CERAMIC FILTERS ∙ SAW COMPONENTS
PAGE 10 OF 13 I SPEC 01 I REV.00 I NOVEMBER 2014
PETERMANN-TECHNIK GmbH
Lechwiesenstr. 13 ∙ D-86899 ∙ Landsberg am Lech
Tel: +49/8191/305395 ∙ Fax: +49/8191/305397
[email protected] ∙ www.petermann-technik.com
DIMENSIONS AND PATTERNS
RECOMMENDED LAND PATTERN (UNIT:MM)
PACKAGE SIZE – DIMENSIONS (UNIT:MM)
5.0X 3.2 X 0.75 MM
#2
#5
#4
#1
#2
#3
#3
1.20
2.20
#6
0.64
0.90
0.75±0.05
#1
2.54
2.54
#4
0.9
#5
0.8
5.0±0.10
3.2±0.10
#6
RECOMMENDED LAND PATTERN (UNIT:MM)
PACKAGE SIZE – DIMENSIONS (UNIT:MM)
7.0X 5.0 X 0.90 MM
2.30
5.08
#6
#5
#4
#2
#3
0.90±0.10
#1
#1
#2
#3
3.80
1.10
1.40
1.60
#4
1.47
#5
5.08
5.0±0.10
2.60
1.47
#6
7.0±0.10
1.60
No Connect or Connect
to GND (recommended)
Note:
1. A capacitor value of 0.1 µF between VDD and GND is recommended.
CRYSTALS ∙ OSCILLATORS ∙ CERAMIC RESONATORS ∙ CERAMIC FILTERS ∙ SAW COMPONENTS
PAGE 11 OF 13 I SPEC 01 I REV.00 I NOVEMBER 2014
PETERMANN-TECHNIK GmbH
Lechwiesenstr. 13 ∙ D-86899 ∙ Landsberg am Lech
Tel: +49/8191/305395 ∙ Fax: +49/8191/305397
[email protected] ∙ www.petermann-technik.com
ORDERING INFORMATION
OSCILLATOR
FAMILY
DLPO2
SUPPLY VOLTAGE
FREQUENCY
TEMPERATURE
RANGE
“18“ for 1.8V (CML only(
“25“ for 2.5V
“33“ for 3.3V
SIGNALING TYPE
220.000000 MHz to
800.000000 MHz
“C” for 0 +70°C
“M” for -20 +70°C
“W” for -40 +85°C
“0” = LVPECL-0 (Figure 1)
“1” = LVPECL-1 Figure 2, 3)
“2” = LVDS
“3” = CML
“4” = LVCMOS
DLPO2 33-5032-E-15-W-220.000MHz-T-1-N
FREQUENCY
STABILITY
“10” for ±10 PPM
“15” for ±15 PPM
“20” for ±20 PPM
“25” for ±25 PPM
“50” for ±50 PPM
PACKAGE SIZE
PACKING METHOD
“B“ for Bulks or Tubes
“T” for Tape & Reel
SWING SELECT
FEATURE PIN 1
“5032” for 5.0 X 3.2 mm
“7051” for 7.0 X 5.0 mm (with center-pad)
“N” = Normal
“H” = High (LVDS & CML only)
“E” for OUTPUT ENABLE
“S” for STANDBY
EXAMPLE: DLPO233-5032-E-15-W-220.000MHz-T-1-N
PLEASE INDICATE YOUR REQUIRED PARAMETERS
FREQUENCY STABILITY VS. TEMPERATURE RANGE OPTIONS
FREQUENCY
TEMPERATURE
STABILITY (PPM)
RANGE
±10
±15
±20
±25
±50
SUPPLY VOLTAGE
1.8 V
2.5 V
SIGNALING TYPE VS. SWING SELECT OPTIONS
SIGNALING
SWING SELECT
TYPE
3.3 V
C (0 to +70°C)
–


M (-20 to +70°C)
–
–
–
W (-40 to +85°C)
C (0 to +70°C)
–

–

–

M (-20 to +70°C)
–


W (-40 to +85°C)
–



C (0 to +70°C)


M (-20 to +70°C)



W (-40 to +85°C)



C (0 to +70°C)



M (-20 to +70°C)



W (-40 to +85°C)



C (0 to +70°C)



M (-20 to +70°C)



W (-40 to +85°C)



LVPECL-0
LVPECL-1
LVDS
CML
SUPPLY VOLTAGE
1.8 V
2.5 V
3.3 V
Normal
–


–

–

–

–

High
–
Normal
–
High
–
Normal
–
High
–



Normal


High



SAMPLES ARE AVAILABLE WITHIN A SHORT DELIVERY PERIOD!
CRYSTALS ∙ OSCILLATORS ∙ CERAMIC RESONATORS ∙ CERAMIC FILTERS ∙ SAW COMPONENTS
PAGE 12 OF 13 I SPEC 01 I REV.00 I NOVEMBER 2014
PETERMANN-TECHNIK GmbH
Lechwiesenstr. 13 ∙ D-86899 ∙ Landsberg am Lech
Tel: +49/8191/305395 ∙ Fax: +49/8191/305397
[email protected] ∙ www.petermann-technik.com
REFLOW SOLDER PROFILE
PREMIUM QUALITY BY
PETERMANN-TECHNIK
OUR COMPANY IS CERTIFIED ACCORDING TO ISO 9001:2008 IN OCTOBER 2013 BY THE DMSZ CERTIFIKATION GMBH.
THIS IS FOR YOU TO ENSURE THAT THE PRINCIPLES OF QUALITY
MANAGEMENT ARE FULLY IMPLEMENTED IN OUR QUALITY MANAGEMENT SYSTEM AND QUALITY CONTROL METHODS ALSO DOMINATE OUR QUALITY STANDARDS.
© PETERMANN-TECHNIK GmbH 2014. The information contained herein is subject to change at any time without notice. PETERMANN-TECHNIK owns
all rights, title and interest to the intellectual property related to PETERMANN-TECHNIK's products, including any software, firmware, copyright, patent, or trademark. The sale of PETERMANN-TECHNIK products does not convey or imply any license under patent or other rights. PETERMANNTECHNIK retains the copyright and trademark rights in all documents, catalogs and plans supplied pursuant to or ancillary to the sale of products or
services by PETERMANN-TECHNIK. Unless otherwise agreed to in writing by PETERMANN-TECHNIK, any reproduction, modification, translation, compilation, or representation of this material shall be strictly prohibited.
CRYSTALS ∙ OSCILLATORS ∙ CERAMIC RESONATORS ∙ CERAMIC FILTERS ∙ SAW COMPONENTS
PAGE 13 OF 13 I SPEC 01 I REV.00 I NOVEMBER 2014