DTC115EM / DTC115EE / DTC115EUA DTC115EKA / DTC115ESA Transistors Digital transistors (built-in resistors) DTC115EM / DTC115EE / DTC115EUA DTC115EKA / DTC115ESA !Equivalent circuit !Features 1) Built-in bias resistors enable the configuration of an inverter circuit without connecting external input resistors (see the equivalent circuit). 2) The bias resistors consist of thin-film resistors with complete isolation to allow negative biasing of the input, and parasitic effects are almost completely eliminated. 3) Only the on/off conditions need to be set for operation, making device design easy. 4) Higher mounting densities can be achieved. R1 IN OUT R2 GND IN OUT GND !Structure NPN digital transistor (with built-in resistors) !External dimensions (Units : mm) DTC115EM DTC115EE 1.2 0.8 1.6±0.2 1.0±0.1 0.2 0.5 0.5 +0.1 0.2−0.05 0.8 (2) (3) 0.4 0.4 1.2 0.32 0.2 0.7±0.1 +0.1 0.2−0.05 0.55±0.1 (1) IN (2) GND (3) OUT ROHM : VMT3 (3) +0.1 0.3 −0.05 ROHM : EMT3 0~0.1 (1) GND (2) IN (3) OUT 0.1Min. 0.15Max. (2) 0.8±0.1 0.13 0~0.1 0.5 0.22 (1) 1.6±0.2 (1) 0.15±0.05 Abbreviated symbol : 29 Abbreviated symbol : 29 DTC115EKA 2.0±0.2 0.8±0.1 0.95 0.95 0~0.1 Abbreviated symbol : 29 (3) (1) GND (2) IN (3) OUT ROHM : SMT3 EIAJ : SC-59 +0.1 0.15 −0.06 0.4 +0.1 −0.05 All terminals have same dimensions Abbreviated symbol : 29 4±0.2 2±0.2 (15Min.) 5 ROHM : SPT EIAJ : SC-72 3Min. 3±0.2 DTC115ESA 0.15 0.45+ −0.05 0.4 2.5 + −0.1 (1) (2) (3) 0.5 0~0.1 0.15 0.45 + −0.05 (1) GND (2) OUT (3) IN 0.3Min. 0.3+0.1 0.15±0.05 −0 All terminals have same dimensions 2.8±0.2 2.1±0.1 (1) (2) 1.6+0.2 −0.1 (3) ROHM : UMT3 EIAJ : SC-70 0.7±0.1 0.2 1.1+0.2 −0.1 1.9±0.2 (2) 1.25±0.1 (1) 2.9±0.2 0.9±0.1 1.3±0.1 0.65 0.65 0.1Min. DTC115EUA (1) GND (2) IN (3) OUT DTC115EM / DTC115EE / DTC115EUA DTC115EKA / DTC115ESA Transistors !Absolute maximum ratings (Ta=25°C) Parameter Symbol Limits Unit VCC VI 50 −10~+40 V V Supply voltage Input voltage IO 20 IC(Max.) 100 150 Pd 200 mW Junction temperature Tj 300 150 °C Storage temperature Tstg −55~+150 °C Output current DTC115EM / DTC115EE Power dissipation DTC115EUA / DTC115EKA DTC115ESA mA !Electrical characteristics (Ta=25°C) Parameter Input voltage Output voltage Input current Output current DC current gain Symbol VI(off) Min. Typ. Max. − − 0.5 VI(on) 3 − − 0.1 − 0.3 − − 82 − − − 0.15 0.5 − mA µA − VO(on) II IO(off) GI Unit VO=0.3V, IO=1mA V IO=5mA, II=0.25mA Input resistance R1 70 100 130 kΩ Resistance ratio R2/R1 fT 0.8 1 250 1.2 − − MHz Transition frequency − Conditions VCC=5V, IO=100µA V VI=5V VCC=50V, VI=0V IO=5mA, VO=5V − − VCE=10V, IE=−5mA, f=100MHz ∗Transition frequency of the device. !Package, marking, and packaging specifications Type DTC115EM DTC115EE DTC115EUA DTC115EKA DTC115ESA Package Marking VMT3 29 T2L 8000 EMT3 29 TL 3000 UMT3 29 T106 3000 SMT3 29 T146 3000 SPT − TP 5000 Packaging code Basic ordering unit (pieces) ∗ Appendix Notes No technical content pages of this document may be reproduced in any form or transmitted by any means without prior permission of ROHM CO.,LTD. The contents described herein are subject to change without notice. The specifications for the product described in this document are for reference only. Upon actual use, therefore, please request that specifications to be separately delivered. Application circuit diagrams and circuit constants contained herein are shown as examples of standard use and operation. Please pay careful attention to the peripheral conditions when designing circuits and deciding upon circuit constants in the set. Any data, including, but not limited to application circuit diagrams information, described herein are intended only as illustrations of such devices and not as the specifications for such devices. ROHM CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any third party's intellectual property rights or other proprietary rights, and further, assumes no liability of whatsoever nature in the event of any such infringement, or arising from or connected with or related to the use of such devices. Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or otherwise dispose of the same, no express or implied right or license to practice or commercially exploit any intellectual property rights or other proprietary rights owned or controlled by ROHM CO., LTD. is granted to any such buyer. Products listed in this document use silicon as a basic material. Products listed in this document are no antiradiation design. The products listed in this document are designed to be used with ordinary electronic equipment or devices (such as audio visual equipment, office-automation equipment, communications devices, electrical appliances and electronic toys). Should you intend to use these products with equipment or devices which require an extremely high level of reliability and the malfunction of with would directly endanger human life (such as medical instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other safety devices), please be sure to consult with our sales representative in advance. About Export Control Order in Japan Products described herein are the objects of controlled goods in Annex 1 (Item 16) of Export Trade Control Order in Japan. In case of export from Japan, please confirm if it applies to "objective" criteria or an "informed" (by MITI clause) on the basis of "catch all controls for Non-Proliferation of Weapons of Mass Destruction. Appendix1-Rev1.0 WWW.ALLDATASHEET.COM Copyright © Each Manufacturing Company. All Datasheets cannot be modified without permission. This datasheet has been download from : www.AllDataSheet.com 100% Free DataSheet Search Site. Free Download. No Register. Fast Search System. www.AllDataSheet.com