UNISONIC TECHNOLOGIES CO., LTD UH10K NPN SILICON TRANSISTOR GENERAL PURPOSE (DUAL DIGITAL TRANSISTORS) FEATURES * Two UTC DTC123J chips in a SOT-363 package. * Halogen Free EQUIVALENT CIRCUIT (R1=2KΩ, R2=47KΩ) 6 5 4 TR1 R1 R2 R2 R1 TR2 2 1 3 ORDERING INFORMATION Ordering Number Package UH10KG-AL6-R SOT-363 1 E1 Pin Assignment 2 3 4 5 B1 C2 E2 B2 6 C1 Packing Tape Reel MARKING 6 5 4 UHKKG 1 2 3 www.unisonic.com.tw Copyright © 2009 Unisonic Technologies Co., Ltd 1 of 3 QW-R218-010.A UH10K NPN SILICON TRANSISTOR ABSOLUTE MAXIMUM RATINGS (Ta=25°C) PARAMETER SYMBOL RATINGS UNIT VCC 50 V VIN -5 ~ +12 V IOUT 100 mA Output Current IC(MAX.) 100 mA Power Dissipation PD 150 mW Junction Temperature TJ 150 °C Storage Temperature TSTG -55 ~ +150 °C Note: Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. Supply Voltage Input Voltage ELECTRICAL CHARACTERISTICS (Ta =25°C) PARAMETER SYMBOL VI(OFF) Input Voltage VI(ON) Output Voltage VO(ON) Input Current IIN Output Current IO(OFF) DC Current Gain hFE Transition Frequency fT Input Resistance R1 Resistance Ratio R2/R1 Note: Transition frequency of the device TEST CONDITIONS VCC =5V, IOUT =100μA VOUT =0.3V, IOUT =5mA IOUT/IIN =5mA/0.25mA VIN =5V VCC =50V, VIN =0V VOUT =5V, IOUT =10mA VCE=10V, IE=-5mA, f=100MHz (Note) UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw MIN 1.1 TYP MAX UNIT 0.5 V V 0.1 0.3 V 3.6 mA 0.5 µA 80 1.4 18 250 2 23 2.6 28 MHz kΩ 2 of 3 QW-R218-010.A UH10K NPN SILICON TRANSISTOR TYPICAL CHARACTERISTICS DC Current Gain 14 60 12 Output Current, IOUT (μA) Output Current, IOUT (μA) VO-GND BREAKDOWN VOLTAGE 70 50 40 30 20 10 0 0 20 40 60 80 100 120 140 160 Output Voltage, VOUT (V) 10 8 6 4 2 0 0 2 8 4 6 10 12 Output Voltage, VOUT (V) 14 UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 3 of 3 QW-R218-010.A