D2MC Low-Torque Basic Switch Highly Reliable Rotary-action Switch for Low Torque Operation (0.5 mN·m ) ● 0.5A rated model employs crossbar gold-alloy D 2 M C contacts for excellent contact reliability in the micro load range. ● Long durability (10,000,000 mechanical operations min.) through use of a movable coil spring. RoHS Compliant Model Number Legend Ratings 1 @ 2 @ 3 D2MC - @ Item Model 1. Ratings 5: 250 VAC 5A 01: 30 VDC 0.5A Rated voltage D2MC-5 models D2MC-01 models 2. Maximum Operating Torque (OTq) E: 0.5 m N·m {5.1 gf·cm} F: 0.75 m N·m {7.6 gf·cm} H: 1.00 m N·m {10.2 gf·cm} 3. Direction of Actuator None : Clockwise L : Counterclockwise 5A 5A 125 VAC 0.5A 30 VDC 0.5A Note. The above rating values apply under the following test conditions. (1) Ambient temperature: 20±2°C (2) Ambient humidity: 65±5% (3) Operating frequency: 30 operations/min Characteristics Item List of Models Permissible operating frequency 5A Model D2MC-5 models D2MC-01 models 1° to 360°/s Mechanical 240 operations/min Electrical 60 operations/min (for 0.5 m N·m) 0.5A 100 MΩ min. (at 500 VDC with insulation tester) Insulation resistance D2MC-5E D2MC-5F D2MC-5H D2MC-5EL D2MC-5FL D2MC-5HL D2MC-01E D2MC-01F D2MC-01H D2MC-01EL D2MC-01FL D2MC-01HL Note. All the models listed here are supplied without actuator lever. If an actuator lever is required, please order separately by indicating the model number of the actuator lever (CAA1M). Contact resistance (initial value) Dielectric strength 20 mΩ max. 600 VAC 50/60 Hz 1min Between current-carrying metal parts and ground 1,500 VAC 50/60 Hz 1min Between each terminal and non-current-carrying metal parts 1,500 VAC 50/60 Hz 1min 10 to 55 Hz, 1.5 mm double amplitude 1,000 m/s2 {approx. 100G} max. Durability ●SPDT Shock resistance Malfunction * 1 Mechanical COM Durability * 2 NO NC Electrical Contact Specifications Model Specification Contact Material Gap (standard value) NC Inrush current NO Min. applicable load (see note) Degree of protection D2MC-5 Rivet Silver alloy D2MC-01 Crossbar Gold alloy 15A max. 7A max. 5 VDC 160mA 0.5A max. 0.5A max. 5 VDC 1mA Models with OTq of 0.5 m N·m: 100 m/s2 {10 G} max. Models with OTq of 0.75 m N·m: 100 m/s2 {10 G} max. Models with OTq of 1.00 m N·m: 200 m/s2 {20 G} max. 10,000,000 operations min. (60 operations/min) 100,000 operations min. (30 operations/min) IEC IP40 Ambient operating temperature −25°C to +80°C (at ambient humidity of 60% max.) (with no icing or condensation) Ambient operating humidity 85% max. (for +5°C to +35°C) Weight 0.5 mm 100 mΩ max. Between terminals of the same polarity Vibration Malfunction resistance * 1 Contact Form Item 125 VAC 250 VAC Permissible operating speed Ratings Direction of Operating Torque (OTq) actuation 0.5 m N·m {5.1 gf·cm} Clockwise 0.75 m N·m {7.6 gf·cm} (CW) 1.00 m N·m {10.2 gf·cm} Counter- 0.5 m N·m {5.1 gf·cm} clockwise 0.75 m N·m {7.6 gf·cm} (CCW) 1.00 m N·m {10.2 gf·cm} Resistive load Approx. 10g Note. The data given above are initial values. *1. Close or open circuit of the contact is 1ms max. *2. For testing conditions, consult your OMRON sales representative. 1 D2MC Low-Torque Basic Switch Approved Safety Standard UL (UL1054) /CSA (CSA C22.2 No.55) Rated voltage D2MC-01 D2MC-5 125 VAC 250 VAC Model 0.5A - 5A 5A 30 VDC 0.5A - Dimensions (Unit: mm) /Operating Characteristics The @ in the model number are for the Ratings and OTq code. See the "List of Models" for available combinations of models. D 2 M ●Clockwise (CW) C D2MC-@@ 31 23.8±0.1 18.2 17 14.1 3.1±0.05 dia. 18±0.1 2 Operating characteristics 3.6 FP 3.6 OT A 3.1±0.05 0.8 0.8 Operating direction 4±0.1 dia. 3-#205 tab terminal t=0.8 10 ●Counterclockwise (CCW) D2MC-@@L 9 9 5 31 23.8±0.1 18.2 17 14.1 3.1±0.05 dia. 17.5 8.7±0.1 27.8 A OT 3.1±0.05 0.8 Operating direction 10 0.8 4±0.1 dia. 3-#205 tab terminal t=0.8 9 9 D2MC-5H D2MC-01H PT OT MD RT Max. Min. Min. Min. Total Travel Free Position TT FP Min. 21° 17° 3° 5° 21° 17° 3° 5° 21° 17° 3° 5° 38° 15°±3° Model D2MC-5EL D2MC-01EL D2MC-5FL D2MC-01FL D2MC-5HL D2MC-01HL Operating Torque OTq Max. 0.5 m N·m {5.1 gf·cm} 0.75 m N·m {7.6 gf·cm} 1.00 m N·m {10.2 gf·cm} Releasing Torque RTq Min. 0.06 m N·m {0.6 gf·cm} 0.09 m N·m {0.9 gf·cm} 0.13 m N·m {1.3 gf·cm} 3.6 FP Pretravel Overtravel Movement Differential Release Travel Operating characteristics 3.6 18±0.1 2 PT D2MC-5F D2MC-01F Operating Torque OTq Max. 0.5 m N·m {5.1 gf·cm} 0.75 m N·m {7.6 gf·cm} 1.00 m N·m {10.2 gf·cm} Releasing Torque RTq Min. 0.06 m N·m {0.6 gf·cm} 0.09 m N·m {0.9 gf·cm} 0.13 m N·m {1.3 gf·cm} PT 17.5 8.7±0.1 27.8 Model D2MC-5E D2MC-01E 5 Pretravel Overtravel Movement Differential Release Travel PT OT MD RT Max. Min. Min. Min. Total Travel Free Position TT FP Min. 21° 17° 3° 5° 21° 17° 3° 5° 21° 17° 3° 5° 38° 15°±3° Note 1. Unless otherwise specified, a tolerance of ±0.4 mm applies to all dimensions. Note 2. The operating characteristics are for operation in the A direction ( ). Precautions ★Please refer to "Basic Switches Common Precautions" for correct use. Cautions Correct Use • Connecting to the tab terminal #205 Insert the receptacle for #205 straight toward the terminal. Applying excessive external force horizontally or vertically may cause deformation of terminals and may damage the housings. ●Mounting Use M3 mounting screw with plane washers or spring washers to securely mount the Switch. Tighten the screws to a torque of 0.2 to 0.29 N·m {2 to 3 kgf·cm}. Actuator Lever (Sold Separately) ●CAA1M In addition to the standard wire lever model shown here, various other levers (wire levers) are available upon request. Please purchase the actuator lever you need separately. 2. Push the lever down in the direction of the groove in the rotary disc. 50±1 Rotary disc 0.6 dia. Stainless-steel wire ●Mounting Actuator Lever ●Designing Own Actuator Lever can be mounted easily with one touch as shown below. 1. Insert the end of the actuator lever into the hole in the rotary disc. Read the following instructions if you decide to design your own actuator lever. • Materials: stainless steel, piano wire, hard aluminum wire, etc. • Shape: There are no restrictions on the tip shape or length of the actuator lever. However, if the lever is too long, improper switch resetting or contact chattering may occur. Therefore, the shape of lever as shown below is suitable. The appropriate value of dimension ( ) from the fulcrum is 50 mm. 1.6 0.6 dia. Stainless-steel wire 3.6 Center of rotating axis 2 D2MC Low-Torque Basic Switch D 2 M C • Application examples provided in this document are for reference only. In actual applications, confirm equipment functions and safety before using the product. • Consult your OMRON representative before using the product under conditions which are not described in the manual or applying the product to nuclear control systems, railroad systems, aviation systems, vehicles, combustion systems, medical equipment, amusement machines, safety equipment, and other systems or equipment that may have a serious influence on lives and property if used improperly. Make sure that the ratings and performance characteristics of the product provide a margin of safety for the system or equipment, and be sure to provide the system or equipment with double safety mechanisms. Note: Do not use this document to operate the Unit. OMRON Corporation ELECTRONIC AND MECHANICAL COMPONENTS COMPANY Contact: www.omron.com/ecb Cat. No. B051-E1-09 0812(0207)(O) 3