Datasheet

D2LS
Ultra Subminiature Basic Switch
Compact Surface-mounting
Switches ideal for applications
requiring long durability
High Force type also available
· High operating force type also achieving long durability
(OF: 1.2 N, Durability: 5,000,000 operations)
· Compact size 8.6 × 4.8 × 3.0 mm (W × D × H)
contributing to down-sizing of module
· Clear click feeling
· Embossed taping package for automatic mounting
RoHS Compliant
Model Number Legend
Contact Form
D2LS - @ 1
● SPST-NO
Operating Force (OF)
1: 1.2±0.4 N {122±41 gf}
COM
NO
2: 0.6±0.2 N {61±20 gf}
List of Models
Contact Specifications
Operating Force (OF) Button color
Model
1.2 N {122 gf}
WHITE
D2LS-11
0.6 N {61 gf}
BLUE
D2LS-21
Minimum packing unit *
Contact
2,000 pcs.
Specification
Crossbar
Material
Silver
Gap (standard value)
Minimum applicable load (reference value)
* Products are packed with embossed tape.
0.4 mm
3 VDC 15 µA
Ratings
Rated voltage
Resistive load
6 VDC
1 mA
Note: The rating values apply under the following test conditions.
Ambient temperature: 20 ± 2°C
Ambient humidity: 65 ± 5%RH
Operating frequency: 30 operations/min
Characteristics
Operating speed
Operatiing frequency
1 mm to 500 mm/s
Mechanical/Electrical
Insulation resistance
300 operations/min max.
100 MΩ min. (at 500 VDC)
Contact resistance (initial value)
100 mΩ max.
Dielectric strength
Between terminals of same polarity
600 VAC 50/60 Hz 1 min
Vibration resistance *1
Malfunction
10 to 55 Hz, 1.5 mm double amplitude
Destruction
1,000 m/s2 max.
Malfunction
300 m/s2 max.
Shock resistance *1
Durability *2
Mechanical/Electrical
5,000,000 operations min. (at 300 ops./min.)
Degree of protection
IP40
Ambient operating tamperature
–25 to +85°C (at 60%RH Max.) (with no icing or condensation)
Ambient operation humidity
85%RH max. (for +5 to +35°C)
Weight
Approx. 0.16 g
Note: The data given above are initial values.
*1. The values are at Free Position and Total Travel Position values.
Close or open circuit of the contact is 1ms max.
*2. For testing conditions, consult your OMRON sales representative.
1
D2LS
Ultra Subminiature Basic Switch
Dimensions (Unit: mm) / Operating Characteristics
D2LS-11
D2LS-21
NO terminal
1
PCB pad dimensions (reference)
(TOP VIEW)
COM terminal
1.4
2.25
11.8
8.8
8.6±0.15
11.2±0.2
2.7
1.7
1
OP
3
FP
1.6
2.2
4.8±0.15
3.16±0.2
4±0.1
+0.05
dia.
0
1.1
0.6
0.95±0.05 dia.
0.05±0.05
4±0.1
Model
D2LS-11
D2LS-21
1.2 ± 0.4 N {122 ± 41 gf}
0.15 N {15 gf}
0.6 ± 0.2 N {61 ± 20 gf}
0.15 N {15 gf}
Operating Characteristics
Operating Force
Releasing Force
OF
RF min.
Overtravel
OT min.
Movement Differential MD max.
Operating Position
Free Position
0.1 mm
0.12 mm
3.2 ± 0.2 mm
3.5 ± 0.2 mm
OP
FP
Note:Unless otherwise specified, a tolerance of ±0.4 mm applies to all dimensions.
Packaging Specifications (Unit: mm)
8±0.1
4±0.1
29.4
2
(5.10)
1.75
-0.1
Reel
1.5 0 dia.
(11.5)
24
Drawing direction
13.2 dia.
Standard package Qty: 2,000 pcs./reel
2
380 dia.
D2LS
Ultra Subminiature Basic Switch
Precautions
Refer to General Information.
Cautions
Use the Switch within the rated voltage and current ranges, otherwise the Switch may have a shortened durability, radiate heat,
or burn out. This particularly applies to the instantaneous voltages and currents when switching.
· Manual Soldering
Soldering temperature: 350°C max. at the tip of the soldering
iron
Soldering time: 3 s max.
● Washing
The Switch is not sealed, and cannot be washed. Doing so will
cause the washing agent, together with flux or dust particles
on the PCB, to enter the Switch, resulting in malfunction.
Correct Use
● Soldering
· General Precautions
Before soldering the Switch on a multilayer PCB, test to confirm that soldering can be performed properly. Otherwise the
Switch may be deformed by the soldering heat on the pattern
or lands of the multilayer PCB.
Do not solder the Switch more than twice, including rectification soldering. An interval of five minutes is required between
the first and the second soldering.
● Application Environment
Do not use the Switch in locations that are subject to toxic gas,
silicon, excessive dust, excessive dirt, high temperatures, high
humidity, sudden temperature changes, water splashes, or oil
splashes.
Otherwise, damage resulting by faulty contact of the Switch
contacts, corrosion, or other causes, or other functional faults
may occur.
· Reflow Soldering (Surface Mounting)
Solder the terminals within the heating curve shown in the following diagram.
The peak temperature may vary depending on the reflow bath
used. Confirm the conditions beforehand.
255˚C 3 sec max.
255˚C
220˚C
190˚C
150˚C
60 to 120 s
45 to 75 s
• Application examples provided in this document are for reference only. In actual applications, confirm equipment functions and safety before using the product.
• Consult your OMRON representative before using the product under conditions which are not described in the manual or applying the product to nuclear control systems, railroad
systems, aviation systems, vehicles, combustion systems, medical equipment, amusement machines, safety equipment, and other systems or equipment that may have a serious
influence on lives and property if used improperly. Make sure that the ratings and performance characteristics of the product provide a margin of safety for the system or
equipment, and be sure to provide the system or equipment with double safety mechanisms.
Note: Do not use this document to operate the Unit.
OMRON Corporation
Electronic and Mechanical Components Company
Contact: www.omron.com/ecb
Cat. No. B122-E1-02
1014(1213)
3