Mems Oscillator, High Performance Differential Oscillator, LVPECL and LVDS 1.000 MHz to 220.000MHz IM840 Series Features: Typical Applications: MEMS Technology Direct pin to pin drop-in replacement for industry-standard packages 0.6 pSec RMS phase jitter (random) over 12 kHz to 20 MHz bandwidth LVPECL and LVDS output signaling types Industry-standard package 3.2 x 2.5, and 5.0 x 3.2 mm x mm Pb-free, RoHS and REACH compliant Fibre Channel Server and Storage GPON, EPON 100M / 1G /10G Ethernet Electronic Specifications: Frequency Range Frequency Stability First Year Aging 10 Years Aging Operating Temperature Supply Voltage (Vdd) ±10% Input Voltage High Input Voltage Low Input Pull-up Impedance 1.000 MHz to 220.000 MHz See Part Number Guide ±2.0 ppm max ±5.0 ppm max See Part Number Guide See Part Number Guide 70% of Vdd min 30% of Vdd max 100 kΩ typ., 250 kΩ max 2.0 MΩ min Start-up Time 6.0 mSec typ., 10.0 mSec max Resume Time 6.0 mSec typ., 10.0 mSec max Symmetry 45%/55% LVPECL, DC and AC Characteristics Current Consumption 61 mA typ., 69 mA max OE Disable Supply Currrent 35 mA max Output Disable Leakage Current 1 µA max Standby Current 100 µA max Maximum Output Current 30 mA max Logic “1” Vdd -1.1 min / Vdd – 0.7 max Logic “0” Vdd -1.9 min / Vdd – 1.5 max Output Differential Voltage 1.2 V min. 1.6V typ., 2.0 V max Swing Rise/Fall Time 300 pSec typ, 700 pSec max OE Enable/Disable Time 115 nSec max RMS Period Jitter 1.2 pSec typ., 1.7 pSec max 1.2 pSec typ., 1.7 pSec max 1.2 pSec typ., 1.7 pSec max RMS Phase Jitter (random) 0.60 pSec typ, 0.85 pSec max. LVDS, DC and AC Characteristics Current Consumption 47 mA typ., 55 mA max OE Disable Supply Current 35 mA max Differential Output Voltage 250mV min, 350mA typ. 450mV max Output Disable Leakage Current 1 µA max Standby Current 100 µA max VOD Magnitude Change 50 mV max Offset Voltage 1.125 mV min, 1.200 mV typ., 1.375 mV max VOS Magnitude Change 50 mV max Rise/Fall Time 495 pSec typ. 700 pSec max OE Enable Time/Disable Time 115 nSec max RMS Period Jitter 1.2 pSec typ, 1.7 pSec max 1.2 pSec typ, 1.7 pSec max 1.2 pSec typ, 1.7 pSec max RMS Phase Jitter (random) 0.60pSec typ., 0.85 pSec max Inclusive of all changes in Operating Temp. Range, Load, and Voltage. +25°C ±2.0°C +25°C ±2.0°C Pin 1, OE or ST Pin 1, OE or ST Pin 1, OE logic high or logic low, or ST logic high Pin 1, ST logic low Measured from the time Vdd reaches its rated minimum values Measured from the time ST pin crosses 50% threshold. Excluding Load Termination Current, Vdd = +3.3 V or +2.5 V OE = Low OE = Low ST = Low, for all Vdds Max average current drawn from OUT+ or OUTSee figure 1(a) See figure 1(a) See figure 1(b) 20% to 80%, see figure 1(a) F = 212.50 MHz – For other frequencies, T_oe = 100nSec + 3 period F = 100.00 MHz, Vdd = +3.3 V or +2.5 V F = 156.25 MHz, Vdd = +3.3 V or +2.5 V F = 212.25 MHz, Vdd = +3.3 V or +2.5 V F = 156.25 MHz, Integration Bandwidth = 12 kHz to 20 MHz all Vdds Excluding Load Termination Current, Vdd = +3.3 V or +2.5 V OE = Low See Figure 2 OE = Low ST = Low, for all Vdds See Figure 2 See Figure 2 See Figure 2 20% to 80%, See Figure 2 F = 212.25 MHz, For other Frequencies, T_oe=100nSec + 3 period F = 100.00 MHz, Vdd = +3.3 V or +2.5 V F = 156.25 MHz, Vdd = +3.3 V or +2.5 V F = 212.25 MHz, Vdd = +3.3 V or +2.5 V F = 156.25 MHz, Integration Bandwidth = 12 kHz to 20 MHz all Vdds Notes: All min and max limits are specified over temperature and rated operating voltage with 15pF output unless otherwise stated. Typical values are at +25ºC and nominal supply voltage. ILSI America Phone 775-851-8880 ● Fax 775-851-8882 ●email: [email protected] ● www.ilsiamerica.com Specifications subject to change without notice Rev 02/15/16_A Page 1 of 7 Mems Oscillator, High Performance Differential Oscillator, LVPECL and LVDS 1.000 MHz to 220.000MHz IM840 Series Ordering Information: Part Number Guide Input Voltage Packages IM840B – 5.0 x 3.2 IM840C – 3.2 x 2.5 1 = +1.8 V* 6 = +2.5 V 3 = +3.3 V (see Notes) Operating Temperature 1 = 0ºC to +70ºC 2 = -40ºC to +85ºC 3 = -20ºC to +70ºC Stability (ppm) E = ±10 F = ±20 A = ±25 Z = ±30 B = ±50 Output Select Function 8 = LVDS 9 = LVPECL Frequency H = Tri-state S = Standby - Frequency Notes: +1.8 V Supply Voltage (option 1) is for LVDS outputs only Sample Part Number: IM840C-62F9S-100.0000MHz This 100.0000 MHz oscillator in a 3.2 x 2.5 package with stability ±20 ppm from -40ºC to +85ºC using a supply voltage of +2.5 V. With an output waveform of LCPECL and Pin 1 functioning as Standby Sample Part Number: IM840B-13Z8H-150.0000MHz This 150.0000 MHz oscillator in a 5.0 x 3.2 package with stability ±30 ppm from -20ºC to +70ºC using a supply voltage of +1.8 V. . With an output waveform of LVDS and Pin 1 functioning as Tri-state. Notes: Not all options are available at all frequencies and temperatures ranges. Please consult with sales department for any other parameters or options. Oscillator specification subject to change without notice. Absolute Maximum Limits Storage Temperature Supply Voltage (Vdd) Electrostatic Discharge Solder Temperature (follow standard Pb free soldering guidelines) Junction Temperature -65ºC to +150ºC -0.5 VDC to 4.0 VDC 2000 V max 260ºC max 150ºC max ILSI America Phone 775-851-8880 ● Fax 775-851-8882 ●email: [email protected] ● www.ilsiamerica.com Specifications subject to change without notice Rev 02/15/16_A Page 2 of 7 Mems Oscillator, High Performance Differential Oscillator, LVPECL and LVDS 1.000 MHz to 220.000MHz IM840 Series Waveform Diagrams: Figure 1(a): LVPECL Voltage Levels per Differential Pin (OUT+/OUT-) Figure 1(b): LVPECL Voltage Levels Across Differential Pair Figure 2: LVDS Voltage Levels per Differential Pin (OUT+/OUT-) Termination Diagrams – LVPECL: Figure 3: LVPECL Typical Termination ILSI America Phone 775-851-8880 ● Fax 775-851-8882 ●email: [email protected] ● www.ilsiamerica.com Specifications subject to change without notice Rev 02/15/16_A Page 3 of 7 Mems Oscillator, High Performance Differential Oscillator, LVPECL and LVDS 1.000 MHz to 220.000MHz IM840 Series Figure 4: LVPECL AC Coupled Termination Figure 5: LVPECL with Thevenin Typical Termination Termination Diagram – LVDS: Figure 6: LVDS Single Termination (Load Terminated) ILSI America Phone 775-851-8880 ● Fax 775-851-8882 ●email: [email protected] ● www.ilsiamerica.com Specifications subject to change without notice Rev 02/15/16_A Page 4 of 7 Mems Oscillator, High Performance Differential Oscillator, LVPECL and LVDS 1.000 MHz to 220.000MHz IM840 Series Environmental Specifications: Environmental Compliance Parameter Condition/Test Method MIL-STD-883F, Method 2002 MIL-STD-883F, Method 2007 JESD22, Method A104 MIL-STD-883F, Method 2003 MSL Level 1 at +260ºC Mechanical Shock Mechanical Vibration Temperature Cycle Solderability Moisture Sensitivity Level Pb Free Solder Reflow Profile Units are backward compatible with +240ºC reflow processes Ts max to TL (Ramp-up Rate) Preheat Temperature min (Ts min) Temperature typ (Ts typ) Temperature max (Ts max) Time (Ts) Ramp-up Tate (TL to Tp Time Maintained Above Temperature (TL) Time (TL) Peak Temperature (Tp) Time within 5ºC to Peak Temperature (Tp) Ramp-down Rate Tune 25ºC to Peak Temperature Moisture Sensitivity Level (MSL) ILSI America Phone 775-851-8880 ● Fax 775-851-8882 ●email: [email protected] ● www.ilsiamerica.com Specifications subject to change without notice 3ºC / second max 150ºC 175ºC 200ºC 60 to180 seconds 3ºC / second max 217ºC 60 to 150 seconds 260ºC max for seconds 20 to 40 seconds 6ºC / second max 8 minute max Level 1 Rev 02/15/16_A Page 5 of 7 Mems Oscillator, High Performance Differential Oscillator, LVPECL and LVDS 1.000 MHz to 220.000MHz IM840 Series Mechanical Details: Package Dimensions and Suggested Land Pattern Option C: 3.20 x 2.50 Package Suggested Land Pattern 3.20 ±0.05 2.20 2.50±0.05 Marking 2.25 0.90 0.70 0.80 max 1.00 1.60 0.60 0.65 Option B: 5.00 x 3.20 Package Suggested Land Pattern 5.00 ±0.05 2.54 4 3.20 ±0.05 Marking 1.05 1.20 5 2.54 6 Bottom View 3 2 1 0.90 2.20 1.20 0.80 max 0.64 0.90 Marking Line 1 = XXXXX (Lot code) Dot to denote Pin 1 location Package Information Leadframe: C194 Plating: NiPdAu Pin Functionally: Pin 1 2 Symbol OE Tri-state ST Standby NC NA Functionality High or Open = specified frequency output Low = Output is high impedance, only output is disabled. High or Open = specified frequency output. Low = Output is low (weak pull down). Device goes to sleep mode. Supply current reduces to standby current. No Connection: Leave it floating or connected to GND for better head dissipation Vdd – Power Supply Ground Oscillator output Complementary Oscillator output Power supply voltage 3 GND Power 4 Out+ Output 5 OutOutput 6 Vcc Power Notes: 1. In OE or ST mode, a pull-up resistor of 10.0 kΩ or less is recommended if Pin 1 is not externally driven. If Pin 1 needs to be left floating, use the NC option. 2. A capacitor of value 0.1 µF or higher between Pin 4 (Vcc) and Pin 1 (GND) is required. Pin Assignments OE 1 ST N/C 2 GND 3 ILSI America Phone 775-851-8880 ● Fax 775-851-8882 ●email: [email protected] ● www.ilsiamerica.com Specifications subject to change without notice Top View 6 Vdd 5 OUT- 4 OUT+ Rev 02/15/16_A Page 6 of 7 Mems Oscillator, High Performance Differential Oscillator, LVPECL and LVDS 1.000 MHz to 220.000MHz IM840 Series Tape and Reel Dimensions PITCH Q1 Q2 REEL DIA TAPE WIDTH Q3 Q4 DIRECTION OF FEED REF: EIA-481-E Part Number IM840B IM840C Size Pitch 5.0 x 3.2 3.2 x 2.5 4.0 ± 0.1 4.0 ± 0.1 Tape Width 8.3 max 8.3 max Pin Orient. Q1 Q1 Reel Dia. 180 Dia 180 Dia Count 3000 3000 Notes:` All dimensions are in mm. Do not scale drawings. PROPRIETARY AND CONFIDENTIAL THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION, AND SUCH INFORMATION MAY NOT BE DISCLOSED TO OTHERS FOR ANY PURPOSE NOR USED FOR MANUFACTURING PURPOSES WITHOUT WRITTEN PERMISSION FROM ILSI America. ILSI America Phone 775-851-8880 ● Fax 775-851-8882 ●email: [email protected] ● www.ilsiamerica.com Specifications subject to change without notice Rev 02/15/16_A Page 7 of 7