UNISONIC TECHNOLOGIES CO., LTD MP2510 Preliminary PNP EPITAXIAL SILICON TRANSISTOR PNP TRANSISTOR DESCRIPTION The UTC MP2510 is a PNP transistor, it uses UTC’s advanced technology to provide the customers with high DC current gain and high collector-emitter breakdown voltage, etc. The UTC MP2510 is suitable for automobile power amplifiers, etc. FEATURES * High DC current gain (Min = 40@VCE = 4V, IC = 12A) * High collector-emitter breakdown voltage (Min = -100V) ORDERING INFORMATION Ordering Number Lead Free Halogen Free MP2510L-x-T3P-T MP2510G-x-T3P-T Pin Assignment: B: Base C: Collector E: Emitter www.unisonic.com.tw Copyright © 2013 Unisonic Technologies Co., Ltd Package TO-3P Pin Assignment 1 2 3 B C E Packing Tube 1 of 3 QW-R214-021.a MP2510 Preliminary PNP EPITAXIAL SILICON TRANSISTOR ABSOLUTE MAXIMUM RATINGS (TA=25°C) PARAMETER Collector-Base Voltage Collector-Emitter Voltage Emitter-Base Voltage Collector Current Base Current Collector Power Dissipation (TC=25°C) SYMBOL RATINGS UNIT VCBO -100 V VCEO -100 V VEBO -6 V IC -25 A IB -5 A Pc 125 W Junction Temperature TJ 150 °C Storage Temperature TSTG -55~150 °C Note: Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. ELECTRICAL CHARACTERISTICS (TA =25°C) PARAMETER Collector Cut-Off Current Emitter Cut-Off Current Collector-Emitter Voltage DC Current Gain (Note 1) Collector-Emitter Saturation Voltage Base- Emitter Saturation Voltage Cut-Off Frequency Output Capacitance SYMBOL ICBO IEBO V(BR)CEO hFE VCE(sat) VBE(ON) fT Cob TEST CONDITIONS VCB=100V VEB=6V IC=50mA VCE=4V, IC=12A IC=12A, IB=1.2A VCE=4V, IC=12A VCE=12V, IE=-1A VCB=10V, IE=0A, f=1MHz MIN TYP -100 40 MAX -10 -10 120 -1.5 -1.8 20 200 UNIT µA µA V V V MHz pF CLASSIFICATION OF hFE RANK hFE1 R 40~80 UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw O 60~120 2 of 3 QW-R214-021.a MP2510 Preliminary PNP EPITAXIAL SILICON TRANSISTOR UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 3 of 3 QW-R214-021.a