UNISONIC TECHNOLOGIES CO., LTD MMBT9015 PNP SILICON TRANSISTOR PRE-AMPLIFIER, LOW LEVEL & LOW NOISE 3 FEATURES *High total power dissipation. (450mW) *Excellent hFE linearity. *Complementary to UTC MMBT9014 2 1 SOT-23 (JEDEC TO-236) ORDERING INFORMATION Ordering Number Note: MMBT9015G-x-AE3-R Pin Assignment: E: Emitter B: Base Package SOT-23 C: Collector Pin Assignment 1 2 3 E B C Packing Tape Reel MARKING www.unisonic.com.tw Copyright © 2014 Unisonic Technologies Co., Ltd 1 of 3 QW-R206-023.C MMBT9015 PNP SILICON TRANSISTOR ABSOLUTE MAXIMUM RATINGS (TA=25°C, unless otherwise specified) PARAMETER SYMBOL RATINGS UNIT -45 Collector-Emitter Voltage VCEO V -50 Collector-Base Voltage VCBO V -5 Emitter Base Voltage VEBO V -100 Collector Current IC mA Collector dissipation PC 225 mW Junction Temperature TJ 150 °C Storage Temperature TSTG -55 ~ +150 °C Note: Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. ELECTRICAL CHARACTERISTICS (TA=25°C, unless otherwise specified) PARAMETER Collector-Emitter Voltage Collector-Base Voltage Emitter Base Voltage Collector cutoff current Emitter Cutoff Current DC Current Gain Collector-Emitter Saturation Voltage Base-Emitter Saturation Voltage Base-emitter on voltage Current-Gain-Bandwidth Product Output Capacitance Noise Figure SYMBOL VCEO VCBO VEBO ICBO IEBO hFE VCE(SAT) VBE(SAT) VBE(ON) fT COB NF TEST CONDITIONS IC=-100A, IE=0 IC=-1mA, IB=0 IE=-100A, IC=0 VCB=-50V, IE=0 VEB=-5V, IC=0 VCE=-5V,Ic=-1mA IC=-100mA, IB=-5mA IC=-100mA, IB=-5mA VCE=-5V, IC=-2mA VCE=-5V, IC=-10mA VCB=-10V, IE=0, f=1MHz VCE=-5V,IC=-0.2mA,f=1KHz,RS=-1K MIN -50 -45 -5 60 -0.6 100 TYP MAX UNIT V V V -50 nA -100 nA 200 600 -0.2 -0.7 V -0.82 -1.0 V -0.65 -0.75 V 190 MHz 4.5 7.0 pF 0.7 10 dB CLASSIFICATION OF hFE RANK RANGE A 60-150 UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw B 100-300 C 200-600 2 of 3 QW-R206-023.C MMBT9015 PNP SILICON TRANSISTOR UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 3 of 3 QW-R206-023.C