UNISONIC TECHNOLOGIES CO., LTD UG4J NPN SILICON TRANSISTOR EMITTER COMMON (DUAL DIGITAL TRANSISTORS) FEATURES * Two DTC114T chips in a SOT-353 package. EQUIVALENT CIRCUIT ORDERING INFORMATION Order Number UG4JG-AL5-R Note: Pin Assignment: B: Base C: Collector UG4JG-AL5-R Package SOT-353 E: Emitter 1 B1 Pin Assignment 2 3 4 E1,E2 B2 C2 (1)Packing Type (1) R: Tape Reel (2)Package Type (2) AL5: SOT-353 (3)Green Package (3) G: Halogen Free and Lead Free 5 C1 Packing Tape Reel MARKING www.unisonic.com.tw Copyright © 2015 Unisonic Technologies Co., Ltd 1 of 3 QW-R222-001.B UG4J NPN SILICON TRANSISTOR ABSOLUTE MAXIMUM RATING (TA=25°C, unless otherwise specified) PARAMETER Collector-Base Voltage Collector-Emitter Voltage Emitter-Base Voltage Collector Current Total Power Dissipation Junction Temperature Storage Temperature SYMBOL VCBO VCEO VEBO IC PD TJ TSTG RATINGS 50 50 5 100 150(Note1) +150 -40 ~ +150 UNIT V V V mA mW °C °C Note1. *120mW per element must not be exceeded. 2. Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. ELECTRICAL CHARACTERISTICS (TA=25°C, unless otherwise specified) PARAMETER Collector-Base Breakdown Voltage Collector-Emitter Breakdown Voltage Emitter-Base Breakdown Voltage Current Cutoff Current Emitter Cutoff Current Collector-Emitter Saturation Voltage DC Current Transfer Ratio Transition Frequency Input Resistance Note: * Transition frequency of the device. SYMBOL BVCBO BVCEO BVEBO ICBO IEBO VCE(SAT) hFE fT R1 UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw TEST CONDITIONS IC=50μA IC=1mA IE=1mA VCB=50V VEB=4V IC/IB=10mA/1mA VCE=5V, IC=1mA VCE=10V, IE=-5mA, f=100MHz* MIN 50 50 5 100 7 TYP MAX UNIT V V V 0.5 µA 0.5 µA 0.3 V 250 600 250 MHz 10 13 KΩ 2 of 3 QW-R222-001.B UG4J NPN SILICON TRANSISTOR UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 3 of 3 QW-R222-001.B