TIP TERMINAL SLEEVE TERMINAL 0.05 1.3 X 0.13[3.2] SLOT TYP 0.13 3.3 0.13 3.2 TYP INSULATOR 0.38 9.5 35MMJ2C 2.05 52 0.63 15.9 TIP TERMINAL SLEEVE TERMINAL RING TERMINAL 0.94[2.4] HOLE 15/32-32 UNEF-2A THREAD INSULATOR 0.141±0.002 3.6±0.1 HOLE FOR 3.5mm PLUG 35MMJ3C FLAT WASHER - SEE NOTE 2 0.63 [15.9] O.D. X 0.02 [0.5] THICK HOUSING TIP TERMINAL 35MMJ5C SHOWN +0.010 +0.3 0.469 11.9 - 0.000 0 HEX NUT - SEE NOTE 2 0.56 [14.3] ACROSS FLATS TIP NORMAL TERMINAL SLEEVE TERMINAL INSULATOR PART NUMBER RING NORMAL TERMINAL RING TERMINAL 35MMJ5C RECOMMENDED PANEL CUT-OUT 3.5mm JACK, 2-CONDUCTOR MONO 35MMJ3C 3.5mm JACK, 3-CONDUCTOR STEREO 35MMJ5C 3.5mm JACK, 5-CONDUCTOR STEREO NORMALLED THIS DRAWING DESCRIBES A DESIGN CONSIDERED PROPRIETARY IN NATURE, DEVELOPED AND MANUFACTURED BY SWITCHCRAFT INC. AND IS RELEASED ON A CONFIDENTIAL BASIS FOR IDENTIFICATION PURPOSES ONLY. UNLESS OTHERWISE SPECIFIED 1. MATERIALS: SPRINGS - NICKEL SILVER HOUSING - BRASS, NICKEL PLATED INSULATOR - THERMOPLASTIC, BLACK NUT & WASHER - BRASS, NICKEL PLATED 3. THIS PRODUCT IS RoHS COMPLIANT. 35MMJ2C CUSTOMER DRAWING NOTES: 2. HARDWARE SHIPPED UNASSEMBLED. DESCRIPTION 1. ALL DIMENSIONS IN INCHES - TWO PLACE DECIMALS 0.02 - THREE PLACE DECIMALS 0.005 SIZE REV 25462 ECO NUMBER 10/20/06 DATE REVISIONS RS BY SPEC No. FIRST USED ON SPEC No. 10/18/05 DO NOT SCALE DRAWING SolidWorks CAD File LBS/M MATERIAL TJK APVD MULT FINISH DATE DRAWN A WIDTH NAME BY PNK SEE NOTES SCALE 2:1 CHKD RS 6/23/09 APVD TJK 9/18/09 3.5mm PHONE JACK, RoHS B TEMPER SHEET PART No. 1 OF 35MMJ SERIES 1 REV A