Datasheet

UNISONIC TECHNOLOGIES CO., LTD
1N4007G
DIODE
GLASS PASSIVATED SILICON
RECTIFIER
„
DESCRIPTION
The UTC 1N4007G is a glass passivated silicon rectifier, it uses
UTC’s advanced technology to provide customers with high forward
surge current and low reverse leakage, etc.
„
FEATURES
DO-41
* Low reverse leakage
* High forward surge current capability
„
SYMBOL
„
ORDERING INFORMATION
Ordering Number
Lead Free
Halogen Free
1N4007GL-Z41-B
1N4007GP-Z41-B
1N4007GL-Z41-R
1N4007GP-Z41-R
Note: Pin Assignment: A: Anode
K: Cathode
1N4007GL-Z41-B
(1)Packing Type
„
Package
DO-41
DO-41
Pin Assignment
1
2
K
A
K
A
Packing
Tape Box
Tape Reel
(1) B: Tape Box, R: Tape Reel
(2)Package Type
(2) Z41: DO-41
(3)Lead Free
(3) L: Lead Free, P: Halogen Free
MARKING
Cathode Band for uni-directional Only
4007G
L: Lead Free
P: Halogen Free
Date Code
www.unisonic.com.tw
Copyright © 2014 Unisonic Technologies Co., Ltd
1 of 4
QW-R601-250.C
1N4007G
„
DIODE
ABSOLUTE MAXIMUM RATINGS
Ratings at 25°C ambient temperature unless otherwise specified.
Single phase half-wave 60Hz, resistive or inductive load, for capacitive load current derate by 20%.
PARAMETER
SYMBOL
RATINGS
UNIT
Working Peak Reverse Voltage
VRWM
1000
V
Repetitive Peak Reverse Voltage
VRRM
1000
V
Maximum RMS Reverse Voltage
VRMS
700
V
DC Blocking Voltage
VR
1000
V
Average Rectified Output Current (TA=105°C)
IO
1.0
A
Peak Forward Surge Current 8.3ms Single Half
IFSM
30
A
Sine-Wave Superimposed on Rated Load
Junction Temperature
TJ
-55~+150
°C
Storage Temperature
TSTG
-55~+150
°C
Note: Absolute maximum ratings are those values beyond which the device could be permanently damaged.
Absolute maximum ratings are stress ratings only and functional device operation is not implied.
„
THERMAL DATA
PARAMETER
Junction to Ambient (Note 2)
„
SYMBOL
θJA
RATINGS
50
UNIT
°C/W
ELECTRICAL CHARACTERISTICS
Ratings at 25°C ambient temperature unless otherwise specified.
Single phase half-wave 60Hz, resistive or inductive load, for capacitive load current derate by 20%.
PARAMETER
SYMBOL
TEST CONDITIONS
MIN TYP MAX UNIT
Instantaneous Forward Voltage
VFM
IF=1.0A
1.1
V
TA=25°C
5.0
μA
DC Reverse Current at Rated DC Blocking
IRM
Voltage
TA=100°C
50.0 μA
Junction Capacitance (Note 1)
CJ
15.0
pF
Notes: 1. Measured at 1MHz and applied reverse voltage of 4.0V D.C.
2. Thermal resistance from junction to ambient at 0.375” (9.5mm) lead length, P.C.B. mounted.
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
2 of 4
QW-R601-250.C
1N4007G
„
DIODE
TYPICAL CHARACTERISTICS
Maximum Non-repetitive Peak Forward
Surge Current
30
Peak Forward Surge Current, IFSM (A)
Average Forward Rectified Current, I(AV) (A)
Forward Current Derating Curve
1.0
0.8
0.6
0.4
0
0
Single Phase Half Wave 60Hz
Resistive or inductive Load
25
50
75
100
125
150
25
20
15
10
5.0
1
175
8.3ms Single Half Sine-Wave
(JEDEC Method)
10
Number of Cycles at 60Hz
Ambient Temperature, TA (°C)
Typical Instantaneous Forward
Characteristics
Typical Reverse Characteristics
1,000
10
1
0.1
0.01
0.6
TJ=25°C
Pulse Width=300s
1% Duty Cycle
0.8
1.0
1.2
Nstantaneous Reverse Current, (μA)
Instantaneous Forward Current (A)
20
100
0.1
TJ=25°C
0.01
Transient Thermal Impedance (°C/W )
Junction Capacitance, CJ (pF)
20
40
60
80
100
Typical Transient Thermal Impedance
TJ=25°C
10
100
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
0
Percent of Peak Reverse Voltage (%)
Typical Junction Capacitance
1.0
10
Reverse voltage (V)
TJ=100°C
1
1.4 1.5
200
1
0.1
TJ=150°C
10
Instantaneous Forward Voltage, VFM (V)
100
100
100
10
1
0.1
0.01
0.1
1
10
t, Pulse Duration (sec.)
100
3 of 4
QW-R601-250.C
1N4007G
DIODE
UTC assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or
other parameters) listed in products specifications of any and all UTC products described or contained
herein. UTC products are not designed for use in life support appliances, devices or systems where
malfunction of these products can be reasonably expected to result in personal injury. Reproduction in
whole or in part is prohibited without the prior written consent of the copyright owner. The information
presented in this document does not form part of any quotation or contract, is believed to be accurate
and reliable and may be changed without notice.
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
4 of 4
QW-R601-250.C