ST Opti-Crimp Fiber Optic Connector (MM) - Pre-polished Crimp: WW-FBSP04

specifications
®
ST* fiber optic connectors shall be compliant
with TIA FOCIS-2. ST* connectors shall
contain a factory terminated pre-polished
multimode fiber, requiring no field polishing
and no adhesive. The fiber shall terminate in a
2.5mm ferrule and have a typical insertion
loss of 0.3dB (62.5/125µm) or 0.35dB
(50/125µm) per connector.
NETWORK CONNECTIVITY GROUP
SPEC SHEET
ST* OPTI-CRIMP ® Fiber Optic Connector — Pre-polished Crimp
technical information
ST* OPTI-CRIMP
Multimode Connectors
Fiber compatibility:
62.5/125µm and 50/125µm multimode versions available
Fiber cable type:
Tight-buffered cable only (3.0mm jacketed or 900µm)
Ferrule type:
Zirconia ceramic with a pre-polished fiber stub
Insertion loss:
0.3dB typical (62.5/125µm), 0.35dB typical (50/125µm)
Return loss:
Greater than 20dB
62.5/125µm
black boot:
62.5/125µm
red boot:
50/125µm
black boot:
50/125µm
red boot:
FSTMMBL
FSTMMRD
FSTMM50BL
FSTMM50RD
ST* Adapter Modules with
Phosphor Bronze Split Sleeve
key features and benefits
Pre-polished fiber stub
Eliminates polishing steps, speeding installation
VFL verification during
crimp process
Provides installer with a visual signal when optimal
continuity is made and the crimp step can be performed
Mechanical crimp
cable retention
Consistently provides higher than industry standard cable
retention; requires no adhesive, speeding installation
Proven 2.5mm
ceramic ferrules
Uses standard termination tools and procedures; provides
strength and reliability
Robust design
Protects fibers from mechanical and environmental stress
FOCIS-2 compliant
Ensures intermatability with all FOCIS-2 compliant
components
Exceeds TIA/EIA-568-B.3
Network reliability assured as defined by TIA
Simplex:
CMST**
ST* Adapter Modules with
Zirconia Ceramic Split Sleeve
Simplex:
CMSTZ**
Multimode Patch Cords
and Pigtails
Duplex ST* to ST*:
Simplex ST* to ST*:
Simplex 900µm
buffered ST* pigtail:
Duplex ST* to SC:
Duplex FJ ® plug
to ST*:
F^D2-2M‡
F^S2-2M‡
F^B2-NM‡
F^D2-3M‡
F^D6P-2M‡
^Available in 62.5/125µm (6) and 50/125µm (5).
‡Patch cords are available in 1, 2, 3, 5 and 10
meter lengths, and pigtails are available in 1, 2
and 3 meter lengths.
OPTI-CRIMP Termination Tooling
Termination kit:
applications
The ST* OPTI-CRIMP Fiber Optic Connector
improves an industry standard design.
Elimination of end face polishing and
adhesive provides for easier, faster
installation, especially in remote areas and
confined spaces. This reduces installation
time over standard field polish ST* connectors
by 50%. ST* Fiber Optic Connectors are
widely used in fiber optic backbone and
horizontal applications for high-speed data
transmissions.
installer tips
Terminate on tight-buffered cable only.
Always use FVFL Visual Fault Locator
during termination.
*ST is a registered trademark of Lucent Technologies.
V i s i t o u r w e b s i t e a t : w w w. p a n d u i t . c o m / n c g
FJMVKIT
To upgrade from FJKITG, purchase FJQCVR
fiber cleaver tool and FVFLKIT visual fault
locator kit.
To upgrade from FJMKIT, purchase FVFLKIT
visual fault locator kit.
**Substitute for Colors:
EI =
BU =
BL =
IW =
AW =
Electric Ivory
Blue
Black
Off White
Arctic White
ST* OPTI-CRIMP ® Fiber Optic Connector — Pre-polished Crimp
Standards Compliant Connector Performance
TIA
455
Description
Test Procedure and
TIA/EIA-568-B.3 Required Performance
1
Flex
Apply 1.1lb. (jacketed) or .5lb (buffered) load thru 180° for 100 cycles;
0.75dB maximum insertion loss
< 0.1dB additional loss
2
Impact
8 drops from 1.8m
0.75dB maximum insertion loss
< 0.1dB additional loss
4
High Temperature
60°C for 4 days;
0.75dB maximum insertion loss
< 0.1dB additional loss
5
Humidity
40°at 95% RH for 4 days;<0.4dB additional loss
0.75dB maximum. insertion loss
< 0.1dB additional loss
6
Cable Retention
(Buffered)
(Jacketed)
Apply 11.24 lbs. (jacketed) or 0.5lb (buffered) load for 5 seconds, 0° angle;
4.4lb (jacketed) 0.5lb (buffered) at 90°<0.5dB additional loss 0.75dB
maximum insertion loss
< 0.1dB additional loss
21
Durability
Mate/unmate connectors (500 cycles)
0.75dB maximum insertion loss
< 0.1dB additional loss
34
Insertion Loss
0.75dB maximum insertion loss
0.3dB typical (62.5/125µm),
0.35dB typical (50/125µm)
36
Twist
Apply 3.4lb (jacketed) 0.5lb (buffered) load, 10 cycles from +90° to -90°;
0.75dB maximum insertion loss
< 0.1dB additional loss
107
Return Loss
20dB minimum
>20dB
185
Coupling Strength
Pull plug from jack, 7.4lb load for 5 seconds at 0°;
0.75db maximum insertion loss
< 0.1dB additional loss
188
Low Temperature
0°C for 4 days; <0.3dB additional loss
0.75dB maximum insertion loss
< 0.1dB additional loss
Typical Performance
NOTE: Multimode tests performed at 850 and 1300nm.
3mm Boot
900µm Boot
2.36
[59.94]
2.04
[51.81]
*ST is a registered trademark of Lucent Technologies.
Dimensions are in inches (Dimensions in brackets are in millimeters)
For a copy of PANDUIT product warranties,
log on to www.panduit.com/warranty
NETWORK CONNECTIVITY GROUP
PANDUIT CANADA
Markham, Ontario
Phone: 800-777-3300
PANDUIT EUROPE LTD.
London, UK
Phone: 44 208-601-7200
WORLDWIDE SUBSIDIARIES AND SALES OFFICES
For a full line catalog (SA-NC10CB01A), email us at
[email protected] or call Customer Service at 800-777-3300.
PANDUIT CORP.
Tinley Park, Illinois 60477-3091
Customer Service: 800-777-3300
Technical Support: 866-405-6654
Email: [email protected]
Website: www.panduit.com/ncg
PANDUIT ASIA PACIFIC PTE. LTD.
Republic of Singapore
Phone: (65) 6379 6700
© PANDUIT Corp. 2003
Contact your local authorized PANDUIT
distributor for pricing. For your local
Sales Office call 800-777-3300
PANDUIT JAPAN
Tokyo, Japan
Phone: (81) (3) 3767-7011
PANDUIT LATIN AMERICA
Jalisco, Mexico
Phone: (52) (333) 666-2501
ALL RIGHTS RESERVED
PANDUIT AUSTRALIA PTY. LTD.
Victoria, Australia
Phone: (61) 3-9794 9020
Printed in U.S.A.
WW-FBSP04
07/2003