PanMPO™ Round Harness Cable Assemblies S p e c i f i ca t i o n S H EET technical information PanMPO™ Round Harness Cable Assemblies are pre-terminated 12-fiber cable assemblies. The unique design of the PanMPO™ Connector allows for rapid gender change in the field, in support of standards-compliant cable plant migration from 10G cassette-based systems to 40G MPO connector-based parallel optics cable plant. PanMPO™ Harness Assemblies meet the demands of 10G Ethernet, higher speed 40G Ethernet, and high-speed ANSI Fibre Channel systems, while maintaining compliance to the recommendations of TIA-568-C for both Serial Duplex and Parallel Optics wiring schemes. LC uniboot connectors reduce cable density on the switch by 40% and allow easy change of polarity. application Connect multiple MPO-based infrastructure components to LC-based transceivers, such as LAN switches, servers, patch panels, and zone distribution areas. New cable management transition allows multiple harnesses to attach to each other or be secured to a rack or cabinet with Tak-Ty ® Hook and Loop Cable Ties. construction physical properties Cable type: 3.0mm round indoor Cable outside diameter (OD): 3.0mm Cable jacket ratings: Optical Fiber Nonconductive Plenum (OFNP) Low Smoke Zero Halogen (LSZH) Minimum bend radius: 30mm Flex: 100 cycles at 4.9N Twist: 10 cycles @15N Cable retention strength: 50N Connector durability: 500 mating cycles* Fiber types: Bend insensitive OM3 Bend insensitive OM4 Connector types end ‘A’: PanMPO female PanMPO male Fiber count: 8 = 8-fiber 12 = 12-fiber Jacket color: OM3: Aqua OM4: Aqua Connector types end ‘B’: LC Uniboot (polarity changeable) optical properties environmental properties Maximum cable attenuation: Multimode: 3.5dB/km at 850nm, 1.5dB/km at 1300nm Maximum connector insertion loss: Standard MPO: Standard LC: 0.50dB 0.25dB Minimum connector insertion loss: Multimode: 26dB minimum Operating temperature: Storage and shipping temperature: Installation temperature: 0°C to 50°C -40°C to 65°C 0°C to 50°C standards Meets or exceeds ISO/IEC 11801, TIA/EIA-568-C.3, TIA-604-5 (FOCIS-5), TIA/EIA-604-10 (FOCIS-10), TIA/EIA-568-C.1 RoHS compliant *With proper cleaning and inspection w w w. pa n d u it.c o m PanMPO™ Round Harness Cable Assemblies part number Example: FZTRP8NUSSNF003 = Fiber OM4, 12-fiber, round, plenum rated, PanMPO male to LC uniboot harness with 61cm equal breakout, standard IL, no pulling eye, 3 feet CHARACTER 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 EXAMPLE F Z T R P 8 N U S S N F 0 0 3 1 – Fiber Product F = Fiber 2 – Fiber Type X = OM3 Z = OM4 3 – Fiber Count T = 12-fiber 8 = 8-fiber 4 – Cable Type R = Round 5 – Jacket Type L = Low Smoke Zero Halogen (LSZH) P = Optical Fiber Nonconductive Plenum (OFNP) 6 – Connector Type End “A” 7 = PanMPO™ Female 8 = PanMPO™ Male 10 – Construction/Performance S = Standard IL-Straight Thru 11 – Other N = No variant 12 – Unit of Length M = Meters F = Feet 13, 14, 15 – Length Meters: 001 to 030 Feet: 003 to 100 7 – Connector Variant N = No variant 8 – Connector Type End “B” U = LC Uniboot 9 – Connector Variant D = 1m equal breakout S = 61cm equal breakout F = Staggered pair 1 longest breakout G = Staggered pair 1 shortest breakout H = Staggered pairs 1 and 2 longest breakouts J = Staggered pairs 1 and 2 shortest breakouts For additional options, contact Panduit Customer Service at 800-777-3300. harness assembly detail Key Up Key Up Male LC Uniboot Connector Female Harness with equal breakout (variant 9, choice D or S) Breakout Length As Measured Between Transition Front Housing And Ferrule End Faces (1m or 61cm) Fiber 12 Fiber 1 Note: 8F version is numbers 1 – 8 with fibers 9, 10, 11, and 12 dark. 2 PanMPO™ Round Harness Cable Assemblies staggered harness assembly detail Harness with pairs 1 and 2 shortest or longest (variant 9, choice J or H) Fiber 12 Fiber 1 PanMPO Connector Keyed Feature 190mm 205mm 220mm LC Uniboot Connector LC UnibootFacing up Connector Fiber 1 is located in Fiber Position 1 220mm 205mm 190mm Fiber 12 Fiber 1 3 PanMPO™ Round Harness Cable Assemblies staggered harness assembly detail Harness with pair 1 shortest or longest (variant 9, choice G or F) Fiber 12 145mm 160mm 175mm 190mm 205mm 220mm PanMPO Connector LC Uniboot Keyed Feature Connector Facing up Fiber 1 LC Uniboot Connector Fiber 1 is located in Fiber Position 1 220mm 205mm 190mm 175mm 160mm 145mm Fiber 12 Fiber 1 WORLDWIDE SUBSIDIARIES AND SALES OFFICES PANDUIT CANADA Markham, Ontario [email protected] Phone: 800.777.3300 PANDUIT EUROPE LTD. London, UK [email protected] Phone: 44.20.8601.7200 PANDUIT SINGAPORE PTE. LTD. Republic of Singapore [email protected] Phone: 65.6305.7575 PANDUIT JAPAN Tokyo, Japan [email protected] Phone: 81.3.6863.6000 PANDUIT LATIN AMERICA Guadalajara, Mexico [email protected] Phone: 52.33.3777.6000 PANDUIT AUSTRALIA PTY. LTD. Victoria, Australia [email protected] Phone: 61.3.9794.9020 For a copy of Panduit product warranties, log on to www.panduit.com/warranty For more information Visit us at www.panduit.com Contact Customer Service by email: [email protected] or by phone: 800.777.3300 ©2014 Panduit Corp. All rights reserved. FBSP81--WW-ENG 9/2014