GLASS PASSIVATED RECTIFIER 8AF05 THRU 8AF10 VOLTAGE RANGE 50 to 1000 Volts CURRENT 8.0 Ampere FEATURES • • • • • • • ITO-220AC Glass passivated chip junction Low power loss, high efficiency Low leakage High current capacity, high surge capacity High temperature soldering guaranteed 200℃/10 second,0.16”(4.06mm)lead length from case Also available in isolated package under part number 8A05 MECHANICAL DATA • • • • • • Case: Transfer molded plastic Epoxy: UL94V-0 rate flame retardant Polarity: Marked on package Lead: Plated axial lead, solderable per MIL-STD-202E method 208C Mounting position: Any Weight: 0.064ounce, 1.81 gram Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS • • • Ratings at 25℃ ambient temperature unless otherwise specified Single Phase, half wave, 60Hz, resistive or inductive load For capacitive load derate current by 20% SYMBOLS 8AF05 8AF1 Maximum Repetitive Peak Reverse Voltage VRRM 50 100 Maximum RMS Voltage VRMS 35 70 Maximum DC Blocking Voltage VDC 50 100 Maximum Average Forward Rectified Current TA Tc=100℃ Peak Forward Surge Current 8.3mS single half sine wave superimposed on rated load (JEDEC method) 8AF2 200 140 200 8AF4 400 280 400 8AF6 600 420 600 8AF8 800 560 800 8AF10 1000 700 1000 UNIT Volts Volts Volts I(AV) 8.0 Amps IFSM 175 Amps Maximum Instantaneous Forward Voltage at 8.0A VF IR 1.1 10 200 Volts Maximum DC Reverse Current at rated TA = 25℃ DC Blocking Voltage per element T = 125℃ Typical Junction Capacitance (Measured at 1.0MHz and applied reverse voltage of 4.0V) CJ 55 pF RθJC TJ TSTG 2.5 (-55 to +150) (-55 to +150) ℃/W A Typical Thermal Resistance (NOTE 1) Operating Temperature Range Storage Temperature Range Notes: 1. Unit mounted on heatsink Web Site: www.hkmic.com µA ℃ ℃ GLASS PASSIVATED RECTIFIER 8AF05 THRU 8AF10 VOLTAGE RANGE 50 to 1000 Volts CURRENT 8.0 Ampere RATING AND CHRACTERISTIC CURVES 8AF05 THRU 8AF10 FIG.2-MAXIMUM NON-REPETITIVE PEAK 16 8 Single Phase Half Wave 60Hz Resistive or Inductive Load 0.375″(9.5mm) Lead Length 300 CURRENT, (A) PEAK FORWARD SURGE FORWARD SURGE CURRENT (A) AVERAGE FORWARD CURRENT, FIG.1-TYPICAL FORWARD CURRENT DERATING CURVE 8.3ms Single Half Sine-Wave (JEDEC Method) T= Tjmax 200 100 1 Cycle 0 0 25 50 100 75 175 150 125 0 1 2 AMBIENT TEMPERATURE, (° C) 4 6 8 10 40 20 60 100 NUMBER OF CYCLES AT 60 Hz FIG.3-TYPICAL INSTANTANEOUS FIG.4-TYPICAL REVERSE CHARACTERISTICS FORWARD CHARACTERISTICS INSTANTANEOUS REVERSE CURRENT, (μA) 100 10 (A) INSTANTANEOUS FORWARD CURRENT, 1000 1.0 TJ =25° C Pulse Width=300us 1% Duty Cycle 0.1 0.4 0.8 1.6 1.2 INSTANTANEOUS FORWARD VOLTAGE,(V) 100 TJ =125° C 10 1.0 TJ=25° C 0.1 0 20 40 60 80 100 FIG.5-TYPICAL JUNCTION CAPACITANCE PERCENT OF RATED PEAK 100 JUNCTION CAPACITANCE,(pF) REVERSE VOLTAGE,(%) 10 TJ =25° C f=1MHz Vsig=50mVp-p 1 0.1 1.0 10 100 REVERSE VOLTAGE,(V) Web Site: www.hkmic.com 120 140