SUPER FAST GLASS PASSIVATED RECTIFIER SF301P THRU SF304P VOLTAGE RANGE 50 to 200 Volts CURRENT 30.0 Ampere FEATURES • • • • • • • TO-3P(TO-247AD) Glass passivated chip junction Low power loss, high efficiency Low leakage Super fast switching speed High surge capacity High temperature soldering guaranteed 250℃/10 second, 0.16″(4.06mm) lead length Also available with common Anode, add an “A” suffix, i.e. SF301PA, add as a doubler, add a “D” suffix, i.e. SF301PD MECHANICAL DATA • • • • • • Case: Transfer molded plastic Epoxy: UL94V-0 rate flame retardant Lead: Solderable per MIL-STD-202E method 208C Polarity: as marked Mounting position: Any, 10 in-lbs Torque Max Weight: 0.22ounce, 6.3 gram Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS • Ratings at 25℃ ambient temperature unless otherwise specified Single Phase, half wave, 60Hz, resistive or inductive load For capacitive load derate current by 20% SYMBOLS SF301P Maximum Repetitive Peak Reverse Voltage VRRM 50 Maximum RMS Voltage VRMS 35 Maximum DC Blocking Voltage VDC 50 • • Maximum Average Forward Rectified Current At Tc=100℃ Peak Forward Surge Current 8.3ms single half sine wave superimposed on rated load (JEDEC method) SF302P 100 70 100 SF303P 150 105 150 SFF304P 200 140 200 UNIT Volts Volts Volts I(AV) 30 Amps IFSM 250 Amps Maximum Instantaneous Forward Voltage per at 15.0A VF Volts Maximum DC Reverse Current at rated TA = 25℃ DC Blocking Voltage at TA = 125℃ IR 1.0 10 500 trr 35 nS CJ 60 pF RθJC TJ TSTG 1.5 (-55 to +150) (-55 to +150) ℃/W Maximum Reverse Recovery Time Test conditions IF =0.5A, IR =1.0A, IRR =0.25A Typical Junction Capacitance (Measured at 1.0MHz and applied reverse voltage of 4.0V) Typical Thermal Resistance (Note 1) Operating Junction Temperature Storage Temperature Range Notes: 1. Unit mounted on heatsink Web Site: www.hkmic.com µA ℃ ℃ SUPER FAST GLASS PASSIVATED RECTIFIER SF301P THRU SF304P VOLTAGE RANGE 50 to 200 Volts CURRENT 30.0 Ampere FIG.2-MAXIMUM NON-REPETITIVE PEAK DERATING CURVE FORWARD SURGE CURRENT (A) 30 24 Single Phase Half Wave 60Hz Resistive or Inductive Load 0.375″(9.5mm) Lead Length 12 6.0 300 CURRENT, (A) PEAK FORWARD SURGE FIG.1-TYPICAL FORWARD CURRENT 36 8.3ms Single Half Sine-Wave (JEDEC Method) T= Tjmax 200 100 1 Cycle 0 0 25 100 75 50 150 125 175 0 1 2 AMBIENT TEMPERATURE, (° C) 4 6 8 10 40 20 60 100 NUMBER OF CYCLES AT 60 Hz FIG.4-TYPICAL REVERSE CHARACTERISTICS PER LEG FIG.3-TYPICAL INSTANTANEOUS 100 FORWARD CHARACTERISTICS PER LEG INSTANTANEOUS REVERSE CURRENT, (μA) TJ =125° C 10 (A) INSTANTANEOUS FORWARD CURRENT, 100 1.0 TJ =25° C Pulse Width=300us 1% Duty Cycle 0.1 0.5 0.6 0.7 0.8 0.9 1.0 1.1 10 1.0 TJ=25° C 0.1 1.2 INSTANTANEOUS FORWARD VOLTAGE,(V) 0.01 0 20 40 60 80 100 PERCENT OF RATED PEAK FIG.5-TYPICAL JUNCTION CAPACITANCE PER LEG REVERSE VOLTAGE,(%) 300 JUNCTION CAPACITANCE,(pF) AVERAGE FORWARD CURRENT, RATING AND CHRACTERISTIC CURVES SF301P THRU SF304P 250 200 150 100 TJ =25° C f=1MHz Vsig=50mVp-p 50 1 0.1 1.0 10 100 1000 REVERSE VOLTAGE,(V) Web Site: www.hkmic.com 120 140