SINGLE PHASE BRIDGE RECTIFIER FBR605 THRU FBR610 VOLTAGE RANGE 50 to 1000 Volts CURRENT 6.0 Ampere FEATURES Low cost High forward surge current capacity Fast switching high efficiency High temperature soldering guaranteed: 260OC / 10 seconds, at 5 lbs. (2.3kg) tension. 0.10( 2.5) x45 0.158( 4.0) DIA 0.142( 3.6) + AC 0.445( 11.3) 0.405( 10.3) AC MECHANICAL DATA • • • • • 0.620( 15.7) 0.580( 14.7) Case: Molded plastic body Terminal: Lead solderable per MIL-STD-202E method 208C Polarity: Polarity symbols marked on case Mounting: Thru hole for #6 screw, 5 in-lbs torque max. Weight: 0.13 ounce, 3.66 gram 0.270( 6.9) 0.230( 5.8) 0.75( 19.0) MIN 0.85( 21.6) MIN 0.08( 2.0) MIN 0.042( 1.10) DIA 0.038( 0.97) TYP Ratings at 25OC ambient temperature unless otherwise specified Single Phase, half wave, 60Hz, resistive or inductive load For capacitive load derate current by 20% Dimensions in inches and (millimeters) SYMBOLS FBR605 FBR61 Maximum Repetitive Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Output Current, at TC = 50℃ (Note 1) TA = 25℃ (Note 2) Peak Forward Surge Current 8.3mS single half sine wave superimposed on rated load (JEDEC method) VRRM VRMS VDC 50 35 50 0.620( 15.7) 0.580( 14.7) - MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS • • • BR-6 0.445( 11.3) 0.405( 10.3) ° • • • • FBR62 FBR64 FBR66 200 140 200 400 280 400 6.0 3.0 600 420 600 100 70 100 I(AV) FBR68 FBR610 800 560 800 1000 700 1000 UNIT Volts Volts Volts Amps IFSM 125 Amps Rating for Fusing (t<8.3mS) I2 t 64 A2s Maximum Instantaneous Forward Voltage drop per Bridge element at 3.0 A TA = 25℃ Maximum DC Reverse Current at Rated DC Blocking Voltage per element TA = 100℃ VF Maximum Reverse Recovery Time (Note3) T J=25℃ Isolation Voltage from case to lug Typical Thermal Resistance (Note 1 ) Operating Temperature Rang Storage Temperature Rang 1.2 150 250 2500 8.0 -55 to +150 -55 to +150 Notes: 1. 2. 3. Volts 10 1.0 IR TRR VISO RθJc TJ TSTG 1.3 Unit mounted on 6.0” x 5.5” x 0.11” thick (15×14×0.3cm) AL plate Unit mounted on P.C. Board 0.375” (9.5mm) lead length with 0.47”×0.47” (12×12mm) copper pads. Reverse Recovery test conditions: IF=0.5A, IR=0.5A, IRR=0.25A Web Site: www.hkmic.com 500 µA mA nS Volts O C/W O C O C SINGLE PHASE BRIDGE RECTIFIER FBR605 THRU FBR610 Web Site: www.hkmic.com VOLTAGE RANGE 50 to 1000 Volts CURRENT 6.0 Ampere