GLASS PASSIVATED SINGLE-PHASE BRIDGE RECTIFIER CURRENT GBL • • O + 1.9 - 2.5 ~ ~ ~ 17 - 18.2 2.03 - 2.41 0.9 - 1.1 3.25 - 3.56 Case: molded plastic body over passivated junctions Terminal: Plated leads solderable per MIL-STD-750 Method 2026 Mounting position: Any Weight: 0.071 oz, 2.0g 4.8 - 5.3 0.46 - 0.56 MECHANICAL DATA • • 20.7 - 20.9 20.7×45 10.4 - 10.7 Plastic package has Underwriters Laboratory Flammability Glassification 94V-0 Glass passivated chip junction High case dielectric strength Typical IR less than 0.1 A High surge current capability Ideal for printed circuit boards High temperature soldering guaranteed: 260℃/10 seconds, 0.375”(9.5mm) lead length 5lbs.(2.3kg) tension 0.80 - 1.08 • • • • • • 1.5 Amperes 1.5 - 2.03 FEATURES • 200 to 1000 Volts VOLTAGE RANGE G2SBA20 THRU G2SBA100 Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS • • • Ratings at 25℃ ambient temperature unless otherwise specified Single Phase, half wave, 60Hz, resistive or inductive load For capacitive load derate current by 20% SYMBOLS G2SBA20 Maximum Reverse Peak Repetitive Voltage VRRM 200 Maximum RMS Voltage VRMS 140 Maximum DC Blocking Voltage VDC 200 Maximum Average Forward T C=80℃ (Note 1) Rectified Output Current At TA=25℃ Peak Forward Surge Current single sine-wave superimposed on rated load (JEDEC Method) Maximum Instantaneous Forward drop Per leg At 0.75 Amperes TA=25℃ Maximum Reverse Current at rated DC blocking voltage per element TA=125℃ Rating for Fusing (t＜8.3ms) Typical Thermal Resistance Per Leg Operating Junction Storage and Temperature Range G2SBA60 600 420 600 G2SBA80 800 560 800 G2BA100 1000 700 1000 UNIT Volts Volts Volts I(AV) 2.0 1.5 Amps IFSM 60 Amps VF 1.00 Volts IR I2 t RΘJA RΘJC TJ ,TSTG 5.0 300 15 40 12 -55 to +150 Notes: 1.Unit mounted on P.C.B. at 0.375” (9.5mm) lead length and 0.5×0.5” (12×12mm) copper pads Web Site: www.hkmic.com μA A2s ℃/W ℃ GLASS PASSIVATED SINGLE-PHASE BRIDGE RECTIFIER 200 to 1000Volts VOLTAGE RANGE G2SBA20 THRU G2SBA100 CURRENT 1.5 Amperes RATINGS AND CHARACTERISTIC CURVES G2SBA20 THRU G2SBA100 FIG. 2- MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT PER LEG FIG. 1- DERATING CURVE OUTPUT RECTIFIED CURRENT 100 P.C.B. Mounting, T A PEAK FORWARD SURGE, CURRENT,(A) AVERAGE FORWARD OUTPUT, (IF(AV)) 2 1.5 1 0.5 0 0 25 75 50 100 80 60 40 20 150 125 0 1 CYCLE 1 100 AMBIENT TEMPERATURE, ℃ NUMBER OF CYCLES AT 60 Hz FIG. 4- TYPICAL REVERSE CHARACTERISTICS PER LEG FIG. 3- TYPICAL FORWORD CHARACTERISTICS PER LGE 100 INSTANTANEOUS REVERSE CURRENT, (A) 10 1 0.1 0.01 0.6 1 1.4 1.8 2.6 2.2 3 1 0.1 TA =25℃ 3.4 40 20 80 60 100 PERCENT OF RATED PEAK REVERSE VOLTAGE, ( %) FIG. 5- TYPICAL JUNCTION CAPACITANCE PER LEG FIG. 6- TYPICAL TRANSIENT THERMAL IMPEDANCE 100 10 1 0.1 0 INSTANTANEOUS FORWARD VOLTAGE, (V) 100 JUNCTION CAPACITANCE, (pF) TA =125℃ 10 0.01 1 10 100 TRANSIENT THERMAL IMPEDANCE (℃/W) INSTANTANEOUS FORWARD CURRENT, (A) 100 10 1 0.1 0.01 0.01 0.1 1 T, HEATING TIME (SEC.) REVRESE VOLTAGE,(V) Web Site: www.hkmic.com 10 100