LOW FORWARD VOLTAGE SCHOTTKY BARRIER RECTIFIER SRL2030C THRU SRL2060C VOLTAGE RANGE 30 t o 60 Volts CURRENT 20.0 Amperes FEATURES • • • • • • • Schottky Barrier Chip Guard Ring Die Construction for Transient Protechion Low Power Loss, High efficiency High Surge Capability High Current capacity and Low Forward Voltage Drop For use in low voltage high frequency inverters, Free wheeling, and polarity protection applications Plastic Material has UL Flammability Classification 94V-0 TO-220AB MECHANICAL DATA • • • • • • Dimensions in inches and (millimeters) Case: TO-200AB molded plastic Terminals: Plated Lead solderable per MIL-STD-202 Method 208 Polarity: As Marked on Body Weight: 1.7 grams (approx) Mounting Position: Any Marking: Type Number MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS • • Single Phase, half wave, 60Hz, resistive or inductive load For capacitive load derate current by 20% SRL SYMBOLS 2030C Peak Repetitive Reverse Voltage VRRM Working Peak Reverse Voltage 30 VRWM DC Blocking Voltage VR RMS Reverse Voltage VR(RMS) 21 Average Rectified Output Current (Note 1)@Tc=95℃ Non-Repetitive Peak Forward Surge Current 8.3ms single half sine wave superimposed on rated load (JEDEC method) Forward Voltage Drop @IF =10A,TC=25℃ Peak Reverse Current at Rated DC Blocking Voltage TC = 25℃ TC = 100℃ Typical Junction Capacitance(Note2) Typical Resistance Junction to case(Note1) Operating and Storage Temperature Range SRL 2035C SRL 2040C SRL 2045C SRL 2050C SRL 2060C UNIT 35 40 45 50 60 V 25 28 32 35 42 V IO 20.0 A IFSM 175 A VFM IRM Cj RθJC TJ TSTG Notes: 1. Thermal Resistance Junction to case mounted on heatsink 2. Measured at 1.0MHz and applied reverse voltage of 4.0V DC Web Site: www.hkmic.com 0.55 1.0 50 650 2.8 (-55 to +150) 0.65 V mA pF ℃/W ℃ LOW FORWARD VOLTAGE SCHOTTKY BARRIER RECTIFIER SRL2030C THRU SRL2060C VOLTAGE RANGE 30 to 60 Volts CURRENT 20.0 Ampere FIG.2-TYPICAL FORWARD CHARACTERISTICS 20 INSTANTANEOUS FORWARD CURRENT, ( A) FIG.1-FORWARD CURRENT DERATING CURVE 40 16 12 4 I( T j =25℃ Pulse Width=300μs 2% duty cycle 0.1 0.1 0 50 100 TC ,CASE TMPERSTRUE( ℃ ) 150 300 0.3 0.5 0.7 0.9 1.1 VF,INSTANTANEOUS FORWARD VOLTAGE( V ) FIG.3 MAX NON-REPETITIVE SURGE CURRENT 4000 8.3ms Single Half Sine-Wave JEDEC Method FIG4 TYPICAL JUNCTION CAPACITANCE PER ELEMENT T j =25 ℃ f=1MHz C j ,CAPACITANCE( pF) 250 200 150 100 1000 50 0 1 10 NUMBER OF CYCLES AT 60 Hz 100 IR, INSTANTANOUS REVERSE CURRENT,( mA ) IFSM ,PEAK FORWARD SURGE CURRENT, ( A) SRL2050C-SRL2060C 1.0 8 0 SRL2030C-SRL2045C 10 AV ) ,AVERAGE FORWARD CURRENT, ( A) RATINGE AND CHARACTERISTIC CURVES SRL2030C THRU SRL2060C 10 100 0.1 100 FIG.5-TYPICAL REVERSE CHARACTERISTICS Tj =100℃ Tj =75 ℃ 1.0 0.1 0.01 0 Tj =25℃ 40 80 120 PERCENT OF RATED REVERSE VOLTAGE,( % ) Web Site: www.hkmic.com 1.0 10 VR,REVERSE VOLTAGE( v) 100