MASTER INSTRUMENT CORPORATION SINGLE-PHASE BRIDGE RECTIFIER BR1005 THRU BR1010 VOLTAGE RANGE CURRENT FEATURES l Low cost l This series is UL recognized under component index, file number E127707 l High forward surge current capability l Ideal for printed circuit board l High isolation voltage from case to leads l High temperature soldering guaranteed: 260 oC/10 second, at 5 lbs. (2.3kg) tension. 50 to 1000 Volts 10 Amperes 0.52( 13.2) 0.48( 12.2) ° 0.07( 1.8) x45 0.16( 4.1) 0.14( 3.6) DIA + AC 0.52( 13.2) 0.48( 12.2) AC 0.77( 19.6) 0.73( 18.5) - 0.77( 19.6) 0.73( 18.5) 0.30( 7.6) 0.25( 6.4) MECHANICAL DATA l Case: Molded plastic body l Terminal: Lead solderable per MIL-STD-202E method 208C. l Polarity: Polarity symbols molded on case l Mounting: Thru hole for #6 screw, 5 in.-lbs torque max. l Weight:0. 20ounce, 5.62 grams 0.85( 21.6) MIN 0.75( 19.0) MIN 0.08( 2.0) MIN 0.052( 1.3) DIA. 0.048( 1.2) TYP. Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25oC ambient temperature unless otherwise specified. Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load derate current by 20%. SYMBOLS BR1005 BR101 BR102 BR104 BR106 BR108 BR1010 UNITS Maximum Repetitive Peak Reverse Voltage VRRM 50 100 200 400 600 800 1000 Volts Maximum RMS Voltage VRMS 35 70 140 280 420 560 700 Volts Maximum DC Blocking Voltage VDC 50 100 200 400 600 800 1000 Volts 10.0 TC=50℃(Note1) Maximum Average Forward Rectified Output Current, at TC=100℃(Note1) I(AV) TA=50℃(Note2) 6.0 Amps 6.0 Peak Forward Surge Current 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) IFSM 150 Amps 2 93 1.1 5.0 1.0 A2 S Volts µAmps mAmps Rating for Fusing(t<8.3ms) Maximum Instantaneous Forward Voltage at 5.0A Maximum DC Reverse Current at rated TA=25 oC DC blocking voltage TA=150o C IT VF Isolation Voltage from case to leads VISO 2500 VAC Typical Thermal Resistance (Note 1) RθJC 6.0 ℃/W TJ -55 to +150 ℃ TSTG -55 to +150 ℃ Operating Temperature Range Storage Temperature Range IR NOTES: 1. Unit mounted on 8.7”×8.7”×0.24” thick (22×22×0.6mm) Al. plate. 2. Unit mounted on P.C.B at 0.375” (9.5mm) lead length with 0.47”×0.47” (12×12mm) copper pads. Web Site: www.hkmic.com 1/2 MASTER INSTRUMENT CORPORATION SINGLE-PHASE BRIDGE RECTIFIER BR1005 THRU BR1010 VOLTAGE RANGE CURRENT Web Site: www.hkmic.com 50 to 1000 Volts 10 Amperes 2/2