Coil type EMI Filters Coil type EMI Filters (Digital Noise Filters) Type: ELKE□ Features ● 3218 case size, 6 A rated current (ELKEA) and 2 A rated current (ELKE) ESD suppression with varistor and included coils ● No variation in attenuation characteristics due to current changes ● Easily discernible part number written by lasers ● RoHS compliant ● High Recommended Applications ● Data lines, secondary power supply lines (DC lines) for game, digital AV and communications equipment. Explanation of Part Numbers [ELKE, ELKEA Series] 1 2 3 4 5 6 7 8 9 10 E L K E A 1 0 3 F A Model Type Product Code E 3218 (1207) A 6 A model size : mm (inch) Nil 2 A model Capacitance Packaging Design No. A Use only for reflow soldering F Embossed Carrier Taping [ELKEV Series] 1 2 3 4 5 6 7 8 9 10 E L K E V 3 5 2 F C Model Type Product Code E 3218 (1207) V Included varistor Capacitance F Embossed Carrier Taping size : mm (inch) Packaging Design No. Circuit voltage F 15 V E 12 V C 5V Construction 1 2 3 No. Part Name Material 1 Enclosure PPS resin mixed with ferrite powder 2 Coil Copper alloy plate 3 Terminal Copper alloy plate with SnCu 4 Capacitor Chip capacitor 4 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 03 Oct. 2014 Coil type EMI Filters Dimensions in mm (not to scale) Land Pattern in mm (not to scale) 0.8 2.3 3.2 2.6 0.7 1.8 2.2 P/N, Date Code 0.8 2.2 5.0 0.8 1.8 Packaging state Content indication Top tape Embossed carrier tape Reel Reel Terminal Product Pocket Product Empty Pocket Reel Size : 0178 Q’ty : 2,000 pcs./reel Packaging : Embossed Carrier Taping Leader tape Pulling direction Soldering conditions for reflow Temp. (°C) 300 260 °C max. 230 °C 200 180 °C 150 °C 100 0 60 to 120 s 30 to 40 s Time Storage Conditions ● Package : Normal temperature (–5 to 35 °C), normal humidity (85 %RH max.), shall not be exposed to direct sunlight and harmful gases and care should be taken so as not to cause dew. ● Operating Temperature : –40 to +85 °C Storage Period ● Solderability may be reduced due to the conditions of high temperature and high humidity which causes the oxidation of tin-plated terminals. Even if storage conditions are within specified limits, solderability may be reduced with time. Therefore, please control the storage conditions and use the product within 6 months of receipt. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 03 Oct. 2014 Coil type EMI Filters Large Current Coil type EMI Filters (Digital Noise Filters) SMD Type: ELKEA Features ● 3218 case size, 6 A rated current ● No variation in attenuation characteristics due to ● Easily discernible part number written by lasers ● RoHS compliant current changes Typical Specification ● Operating temperature ● Rated Voltage ● Rated Current : –40 to +85 °C : DC 50 V (Except ELKEA333FA : DC25 V) : DC 6 A Standard Parts Cut off frequency (MHz) Part No. ELKEA100FA ELKEA220FA ELKEA470FA ELKEA101FA ELKEA221FA ELKEA471FA ELKEA102FA ELKEA222FA ELKEA103FA ELKEA333FA Inner Capacitance (pF typ.) 500 300 150 70 30 15 7 3 0.5/DC 0.2/DC 10 22 47 100 220 470 1000 2200 10000 33000 Rated Voltage (V) 50 Rated Current (A) min. Packaging Indication 100□ 220□ 470□ 101□ 221□ 471□ 102□ 222□ 103□ 333□ 6.0 25 Indication 2 2,000 pcs. Indication 1 Indication 2 note1 : 4th letter (□) of marking indicates the Month Code. note2 : Indication 1, 2 refer to Indication examples. Performance characteristics (Reference) Equivalent circuit, measurement block diagram ELKEA□□□FA 10 0 100 -20 103 L 102 333 -30 L C 50 Ω 221 471 222 220 470 101 50 Ω Attenuation (dB) -10 SG VV -40 -50 -60 1 10 100 Frequency (MHz) 1000 10000 Indication Examples Top View Side View 103P Indication 2 ELKEA103FA 222P Indication 1 ELKEA100FA ELKEA220FA ELKEA470FA ELKEA101FA ELKEA221FA ELKEA471FA ELKEA102FA ELKEA222FA ELKEA333FA 103P Month Code : 1 Letter Inner Capacitance : 3 Letters Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 03 Oct. 2014 Coil type EMI Filters Coil type EMI Filters (Digital Noise Filters) SMD Type: ELKE Features ● 3218 case size, 2 A rated current ● No variation in attenuation characteristics due to ● Easily discernible part number written by lasers ● RoHS compliant current changes Typical Specification ● Operating temperature ● Rated Voltage ● Rated Current : –40 to +85 °C : DC 50 V (Except ELKE333FA : DC25 V) : DC 2 A Standard Parts Cut off frequency (MHz) Part No. ELKE100FA ELKE220FA ELKE470FA ELKE101FA ELKE221FA ELKE471FA ELKE102FA ELKE222FA ELKE103FA ELKE333FA Inner Capacitance (pF typ.) 250 200 100 50 25 10 5 2 0.5/DC 0.2/DC 10 22 47 100 220 470 1000 2200 10000 33000 Rated Voltage (V) 50 Rated Current (A) Indication min. Packaging unit 2.0 100□ 220□ 470□ 101□ 221□ 471□ 102□ 222□ 103□ 333□ 2,000 pcs. 25 note1 : 4th letter (□) of marking indicates the Month Code. Performance characteristics (Reference) Equivalent circuit, measurement block diagram ELKE□□□FA 10 0 -30 470 471 333 SG L C 50 Ω 50 Ω 減衰量 (dB) 103 L 220 221 222 -20 100 101 102 -10 VV -40 -50 -60 1 10 100 周波数 (MHz) 1000 10000 Indication Examples 103P (Top View) 103P (Side View) Month Code : 1 Letter Inner Capacitance : 3 Letters Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 03 Oct. 2014 Coil type EMI Filters Varistor included Coil type EMI Filters (Digital Noise Filters) SMD Type: ELKEV Features ● High ESD suppression with varistor and included coils variation in attenuation characteristics due to current changes ● Easily discernible part number written by lasers ● RoHS compliant ● No Typical Specification ● Operating temperature ● Rated Voltage ● Rated Current : –40 to +85 °C : Applicable normal voltage for varistor : DC 2 A Standard Parts Part No. Rated Voltage (V) 27 27 27 27 22 12 12 Cut off frequency Inner Capacitance (pF typ.) (MHz) ELKEV150FF ELKEV300FF ELKEV161FF ELKEV431FF ELKEV561FE ELKEV112FC ELKEV352FC 250 200 50 20 10 8 1/DC 15 30 160 430 560 1050 3500 Applicable circuit voltage (V max.) 15 15 15 15 12 5 5 min. Packaging Indication 2.0 150□ 300□ 161□ 431□ 561□ 112□ 352□ 2,000 pcs. Note1 : 4th letter (□) of marking indicates the Month Code. Performance characteristics (Reference) Equivalent circuit, measurement block diagram ELKEV□□□F□ 10 0 300 561 102 161 SG C 50 Ω 431 -20 L 150 50 Ω Attenuation (dB) L -10 VV 352 -30 -40 -50 1 10 100 Frequency (MHz) 1000 10000 Indication Examples 352P 352P Month Code : 1 Letter Inner Capacitance : 3 Letters Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 03 Oct. 2014 Coil type EMI Filters Safety Precautions The following are precautions for individual products. Please also refer to the common precautions for EMC Components in this catalog. 1. Operation range and environments 1 These products are designed and manufactured for general and stan dard use in general elec tron ic equipment (e.g. AV equipment, home electric appliances, office equipment, information and communication equipment) 2 These products are not intended for use in the following special conditions. Before using the products, carefully check the effects on their quality and performance, and determine whether or not they can be used. • In liquid, such as water, oil, chemicals, or organic solvent • In direct sunlight, outdoors, or in dust • In salty air or air with a high concentration of corrosive gas, such as Cl2, H2S, NH3, SO2, or NO2 • In an environment where these products cause dew condensation 2. Handling 1 Do not bring magnets or magnetized materials close to the product. The influence of their magnetic field can change the inductance value. 2 Do not apply strong mechanical shocks by either dropping or collision with other parts. Excessive schock can damage the part. 3. Land pattern design 1 Please refer to the recommended land pattern for each type shown on the datasheet. 2 In case of reflow soldering, consider the layout because taller components close to EMI filters tend to block thermal conduction. 4. Mounting 1 Avoid excessive placement force. 2 Do not bend or twist the PWB after mounting the part. 5. Cleaning 1 Do not use acid or alkali agents. Some cleaning solvents may damage the part. Confirm by testing the reliability in advance of mass production. 2 If Ultrasonic cleaning is used, please confirm the reliability in advance. It is possible that combined resonance of component, PWB and cavitation can cause an abnormal vibration mode to exist causing damage. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 03 Oct. 2014 Safety Precautions (Common precautions for EMC Components and ESD Suppressor) • When using our products, no matter what sort of equipment they might be used for, be sure to make a written agreement on the specifications with us in advance. The design and specifications in this catalog are subject to change without prior notice. • Do not use the products beyond the specifications described in this catalog. • This catalog explains the quality and performance of the products as individual components. Before use, check and evaluate their operations when installed in your products. • Install the following systems for a failsafe design to ensure safety if these products are to be used in equipment where a defect in these products may cause the loss of human life or other significant damage, such as damage to vehicles (automobile, train, vessel), traffic lights, medical equipment, aerospace equipment, electric heating appliances, combustion/gas equipment, rotating equipment, and disaster/crime prevention equipment. ✽ Systems equipped with a protection circuit and a protection device ✽ Systems equipped with a redundant circuit or other system to prevent an unsafe status in the event of a single fault (1) Precautions for use • These products are designed and manufactured for general and standard use in general electronic equipment (e.g. AV equipment, home electric appliances, office equipment, information and communication equipment) • These products are not intended for use in the following special conditions. Before using the products, carefully check the effects on their quality and performance, and determine whether or not they can be used. 1. In liquid, such as water, oil, chemicals, or organic solvent 2. In direct sunlight, outdoors, or in dust 3. In salty air or air with a high concentration of corrosive gas, such as Cl2, H2S, NH3, SO2, or NO2 4. Electric Static Discharge (ESD) Environment (except ESD Suppressors) These components are sensitive to static electricity and can be damaged under static shock (ESD). Please take measures to avoid any of these environments. Smaller components are more sensitive to ESD environment. 5. Electromagnetic Environment Avoid any environment where strong electromagnetic waves exist. 6. In an environment where these products cause dew condensation 7. Sealing or coating of these products or a printed circuit board on which these products are mounted, with resin or other materials • These products generate Joule heat when energized. Carefully position these products so that their heat will not affect the other components. • Carefully position these products so that their temperatures will not exceed the category temperature range due to the effects of neighboring heat-generating components. Do not mount or place heat-generating components or inflammables, such as vinyl-coated wires, near these products. • Note that non-cleaning solder, halogen-based highly active flux, or water-soluble flux may deteriorate the performance or reliability of the products. • Carefully select a flux cleaning agent for use after soldering. An unsuitable agent may deteriorate the performance or reliability. In particular, when using water or a water-soluble cleaning agent, be careful not to leave water residues. Otherwise, the insulation performance may be deteriorated. (2) Precautions for storage The performance of these products, including the solderability, is guaranteed for a year from the date of arrival at your company, provided that they remain packed as they were when delivered and stored at a temperature of 5 °C to 35 °C and a relative humidity of 45 % to 85 %. The performance of EMC Components is guaranteed for 6 months or a year after our delivery, provided that they are stored at a temperature of -5 °C to +40 °C and a relative humidity of 40 % to 60 %. Check the guarantee period in the specifications. Even within the above guarantee periods, do not store these products in the following conditions. Otherwise, their electrical performance and/or solderability may be deteriorated, and the packaging materials (e.g. taping materials) may be deformed or deteriorated, resulting in mounting failures. 1. In salty air or in air with a high concentration of corrosive gas, such as Cl2, H2S, NH3, SO2, or NO2 2. In direct sunlight <Package markings> Package markings include the product number, quantity, and country of origin. In principle, the country of origin should be indicated in English. 00 Jul. 2014