PRESS FIT AUTOMOTIVE RECTIFIER(BOSCH) LPB351 THRU LPB356 LPBS351 THRU LPBS356 VOLTAGE RANGE 100 to 600 Volts CURRENT 35.0 Amperes LPB LPBS TECHNICAL SPECIFICATION: Φ1.28±0.5 stannum 4.05± 0.2 10.30± 0.2 7.65± 0.5 Technology: Cell with Vacuum soldered Case: Copper case Polarity: As marked of case bottom Lead: Plated lead , solderable per MIL-STD-202E method 208C Mounting: Press Fit Weight: 0.17 ounces, 4.84 grams (LPB) Weight: 0.14 ounces, 3.96 grams (LPBS) 9.00± 0.2 Φ10.18-10.23 Φ5.5-5.7 Φ5.5-5.7 Φ10.77-10.83 Φ8.2-8.8 Φ9.7-10.4 • • • stannum 3.40± 0.2 MECHANICAL DATA • • • • Φ1.28±0.5 34.75± 0.5 Low Leakage Low forward voltage drop High current capability High forward surge current capacity 8.35± 0.5 • • • • 35.45± 0.5 FEATURES Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS • • • Ratings at 25℃ ambient temperature unless otherwise specified Single Phase, half wave, 60HZ, resistive or inductive load For capacitive load derate current by 20% SYMBOLS LPB351 LPB352 LPB354 LPB356 LPBS351 LPBS352 LPBS354 LPBS356 UNIT Maximum Repetitive Peak Reverse Voltage VRRM 100 200 400 600 Volts Maximum RMS Voltage VRMS 70 140 280 420 Volts Maximum DC Blocking Voltage VDC 100 200 400 600 Volts Maximum Average Forward Rectified Current, I(AV) 35 Amps IFSM 500 Amps Rating for fusing (t<8.3ms) I2t 1038 A2S Maximum instantaneous Forward Voltage at 100A VF 1.08 Volts At Tc=105℃ Peak Forward Surge Current 3.3mS single half sine wave superimposed on Rated load (JEDEC method) Maximum DC Reverse Current at Rated TA=25℃ DC Blocking Voltage TA=100℃ Typical Thermal Resistance Operating and Storage Temperature Range 5.0 IR RθJC 1.0 ℃/W TJ,TSTG (-65 to +175) ℃ Polarity and voltage demotion color band (button) Yellow Notes: 1. UA 250 Enough heatsink must be considered in application. Web Site: www.hkmic.com Silver Orange Green PRESS FIT AUTOMOTIVE RECTIFIER(BOSCH) LPB351 THRU LPB356 LPBS351 THRU LPBS356 100 to 600 Volts 35.0 Amperes LPB351 THRU LPB356 LPBS351 THRU LPBS356 RATINGS AND CHARACTERISTIC CURVES F1G.1 TYPICAL FORWARD CURRENT DERATING GURVE VOLTAGE RANGE CURRENT F1G.2 MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT 30 PEAK FORWARD SURGE CURRENT,(A) AVERAGE FORWARD CURRENT, (A) 35 20 Single Phase 10 Half Wave 60Hz Resistive or Inductive Load 600 8.3ms Single Half Sine-Wave 500 (JEDEC Method) Tj=Tj max 400 300 200 100 1 Cycle 0.375″(9.5mm) Lead Length 1 0 0 25 50 75 100 125 150 175 2 4 6 8 10 20 40 60 80 100 NUMBER OF CYCLES AT 60 Hz CASE TEMPERATURE, (℃) F1G.3 TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS AVERAGE POWER DISSIPATION (W) F1G.4 FORWARD ROWER DISSIPATION INSTANTANEOUS FORWARD CURRENT, (A) 1000 100 10 1.0 0.8 1.0 1.2 1.4 1.6 40 SQUARE WAVE 20 0 0 10 20 30 40 AVERAGE FORWARD CURRENT, (A) T1=25℃ PULSE WIDTH=300μS 1%DUTY CYCLE 0.1 0.6 60 1.8 2.0 INSTANTANEOUS FORWARD VOLTAGE,(V) Web Site: www.hkmic.com 50