Options Size (mm) 60 mm (2.36 inch) sq. 70 mm (2.76 inch) sq. 80 mm (3.15 inch) sq. 90 mm (3.54 inch) sq. M6B2 M8B2 M8B3 M9B2 M9B3 Size (mm) Part number 60 mm (2.36 inch) sq. DV0PN10006 70 mm (2.76 inch) sq. DV0PN10007 80 mm (3.15 inch) sq. DV0PN10008 90 mm (3.54 inch) sq. DV0PN10009 • Decimal gear head mounting screw (Material: Steel Trivalent Chromate Treatment or Black oxide coating) Supporting model Applicable Decimal gear head gear head Standard quantity Specification Part No. Size M0PM4001 60 mm (2.36 inch) sq. MX6G10XB MX6G□BA, MX6G□B MX6G□MA, MX6G□M 4 pcs. Cross recessed pan head screw M4 pitch 0.7, length 85(3.35) M0PM5001 70 mm (2.76 inch) sq. MX7G10XB MX7G□BA, MX7G□B MX7G□MA, MX7G□M 4 pcs. Cross recessed pan head screw M5 pitch 0.8, length 95(3.74) M0PM5002 80 mm (3.15 inch) sq. MX8G10XB MX8G□B, MX8G□M 4 pcs. Cross recessed pan head screw M5 pitch 0.8, length 85(3.35) M0PM6002 90 mm (3.54 inch) sq. MZ9G10XB MY9G□B, MP9G□B MR9G□B 4 pcs. Cross recessed pan head screw M6 pitch 1.0, length 65(2.56) 4 pcs. Cross recessed pan head screw M6 pitch 1.0, length 100(3.94) 4 pcs. Cross-recessed hex head bolt M6 pitch 1.0, length 125(4.92) M0PM6003 90 mm (3.54 inch) sq. MX9G10XB MX9G□B, M0PM6004 90 mm (3.54 inch) sq. MZ9G10XB MZ9G□B MX9G□M [Unit: mm(inch)] * Please read your User's manual carefully so that you will understand the operation and safety precautions before attempting to operate the system. D-2 2.5±1(0.10±0.04) M9P0.75 10±1(0.39±0.04) 15(0.59) or less 48±0.3 (1.89±0.01) 2. 13 )h ol e 48(1.89) 4( ø5 ø45 (ø1.77) 60(2.36) 10±0.4 (0.39±0.02) Panel cutout details TOP VIEW ø15.5(ø0.61) ø2.8±0.2 (ø0.11±0.01) R22(0.87) or less Pot. terminal No. 1 20±1 (0.79±0.04) 3 2 Example ø10(ø0.39) hole Insulation paper* M3.5 24(0.94) or less Unit : mm (inch) Nameplate thickness 0.5 mm (0.02 inch) 50(1.97) 5.4(0.21) 9(0.35) 40 (1.57) 67(2.64) Part number M7B2 20 kΩ 1/4 W B taper • O-ring Repair parts 10 pcs packed in one bag. 48±0.3 (1.89±0.01) • External speed setter (DV0P002) 9.3 (0.37) ø74(ø2.91) * Outer-base type: A motor is attached outside the base mounting position. * Inner-base type: A motor is attached inside the base mounting position. • Mounting frame 7 Knob Nameplate Panel 38(1.50) * Insert the insulation paper to positively isolate the terminals and chassis. • External braking resistor (DV0P003) 5.6 Ω 10 W Unit : mm (inch) <Notice> DV0P003 has 5.6 Ω resistance. When using commercial resistor, select 4.7 Ω to 6.8 Ω and power rating 10 W or more. <Precautions> • The resistor dissipates heat: do not touch. • Mount the resistor to nonflammable material. (øD) W1 W5 33±3.0(1.30±0.12) W2 14±1 0.55±0.04 W1 W6 W6 H2 L 1.89±0.08 W5 0.5(0.02) H1 H2 H3 D d (t) (inch) 48±2 W4 (ød) Size (mm) L W3 W4 Motor + Gear head + Mounting frame Unit : mm (inch) 2-M3 pitch 0.5 mounting screw W2 • Mounting arrangement 130(5.12) Unit : mm (inch) * Not attachable to a hinged gear head or C&B motor. 04 ø1 .09) 4 (ø 8 H1 Unit : mm (inch) 20(0.79) 46(1.81) 10(0.39) 3.5(0.14) 4M6 pitch 1.0 ø83(ø3.27) 20(0.79) 112(4.41) 100(3.94) 91(3.58)sq. 1 6 TM: Tachometer TG: Tachometer generator ø74(ø2.91) 28 28 (1.10) (1.10) 8(0.31) 04 ) ø1 .09 4 (ø 8(0.31) 3.5(0.14) 10(0.39) 13(0.51) 31(1.22) 4M6 pitch 1.0 ø83(ø3.27) 95(3.74) 50(1.97) ø64(ø2.52) ø54(ø2.13) ø62(ø2.44) 6(0.24) 12(0.47) 90(3.54) 98.5(3.88) 53(2.09) 6(0.24) 75(2.95) 40(1.57) 20 20 (0.79)(0.79) 4M5 pitch 0.8 3 2 Trimmer pot. for calibration Index 2 ø8 3) .2 (ø3 7(0.28) 5.5(0.22) 3.5(0.14) M9B3 8.4(0.33) 4 – ø7(ø0.28) 4 – ø4.8(ø0.19) 70(2.76) Unit : mm (inch) 90 mm (3.54 inch) sq. M9B2 48(1.89) (H3) Unit : mm (inch) 90 mm (3.54 inch) sq. M7B2 TM 0.8 (0.03) Unit : mm (inch) 70 mm (2.76 inch) sq. 4 5 Input terminal <Accessories> 2- flat washer Mounting hardware M3 pitch 0.5 2- spring washer 2- hexagon nut W3 120(4.72) To TG 8±1(0.31±0.04) 12.2 (0.48) 8.5(0.33) 2 – ø3.5(ø0.14) hole <Precautions> 1. Tachometer should be wired in parallel with TG. 2. When the wires for the tachometer (TM) becomes too long, use a twisted shielded wire in place. Please do not ground the shield portion. 3. Calibrate the readings with the trimmer potentiometer on the back of TM. Calibration : 1. Measure the motor speed with a revolution counter. 2. Measure the frequency f of the voltage from TG by the oscilloscope. Rotation speed N (r/min) = 5f (Hz) Shielded wire ø24±1.5 (ø0.94±0.06) 4 ø9 70) 3. (ø ø0.6(ø0.024) 4M5 pitch 0.8 ø73(ø2.87) 15(0.59) 35(1.38) 7(0.28) 3.5(0.14) 65(2.56) t 12±0.5 6±0.5 10.5±1.5 3±0.3 5.2±0.5 10.5±1.5 9 +3 –1 (2.2) (3.8) (2.5) (0.6) 0.47±0.02 0.24±0.02 0.41±0.06 0.12±0.01 0.20±0.5 0.41±0.06 0.35 +0.12 – 0.04 (0.09) (0.15) (0.10) (0.02) • Spark killer (DV0P008A) 20.0±1.0 (0.79±0.039) 17.0±1.0 (0.67±0.039) 5.4(0.21) 9(0.35) 35 (1.38) 60(2.36) 90(3.54) 81(3.19)sq. ø69(ø2.27) 6(0.24) 14(0.55) 23 23 (0.91)(0.91) 102(4.02) 88.5(3.48) 48(1.89) 12(0.47) 25(0.98) ø66(ø2.60) 85(3.35) 45(1.77) ø47(ø1.85) 8(0.31) ø54(ø2.13) 6(0.24) 65(2.56) 35(1.38) 17 17 (0.67)(0.67) 4 ø9 0) .7 (ø3 7(0.28) 3(0.12) r/mim Unit : mm (inch) Mounting screw Options 0 ø7 6) 7 (2. 4M5 pitch 0.8 80(3.15) 6(0.24) 3(0.12) max.40(1.57) Brake Unit 4M4 pitch 0.7 The motor speed can be easily indicated. This meter is especially designed for Panasonic controllers only. M8B3 8.4(0.33) 4 – ø5.5(ø0.22) 4 – ø4.8(ø0.19) 60(2.36) 80 mm (3.15 inch) sq. M8B2 9(0.35) 80 mm (3.15 inch) sq. M6B2 ø73(ø2.87) 60 mm (2.36 inch) sq. • Tachometer (DV0P001) <Inner-base type*> <Outer-base type*> 8.0±1.0 (0.31±0.039) <Notice> 1. DV0P008A internal capacitor is 0.1 μF and internal resistance is 120 Ω. When using commercially available ones, follow the instructions shown below. RI 0.1 μF 120 Ω 20 min (0.79 min) • Mounting frame and dimensions Speed controller Options 17.5±1.0 Use a spark killer to protect the main (0.69±0.039) speed control circuit and switches. [Interval between center] ø0.8(0.031) Unit : mm (inch) CI R1 = 10 Ω to 200 Ω (1/4 W or larger) C1 = 0.1 μF to 0.33 μF (125 VAC or 250 VAC) 2. This spark killer cannot be used for 400 V model. Use a spark killer rated at 400 V or higher. * Please read your User's manual carefully so that you will understand the operation and safety precautions before attempting to operate the system. D-3 Recommended components • Unit type motor extension cord • Combination of the set and recommended components DV0P0322 to DV0P0325 DV0P0321 DV0P0322 DV0P0323 DV0P0324 DV0P0325 1 (39.37) 2 (78.74) 3 (118.11) 4 (157.48) 5 (196.85) The 1 m (39.37 inch) cord is supplied with the motor. Connector 2 • The capacitor delivered together with the motor can be separately available as an option. 4 ATC180041 40(1.57) 8-pin 30.5 (1.20) 50 (1.97) 70 (2.76) 37.2 (1.46) 33 4 3.5 0.7 • Socket UL-1015 AWG16 Unit : mm (inch) (7.5) AW68102 Unit : mm (inch) 33 4 3.5 0.7 (7.5) 8.9 3 2 6 2 1 3 7 ø28.5 4 49 * Do not use this socket in condition where it receive any vibration. To securely fix such product,use the DIN terminal block or flush type mounting frame. 5 38 8-pin 8 5 8.9 * Please read your User's manual carefully so that you will understand the operation and safety precautions before attempting to operate the system. D-4 11-pin Unit : mm (inch) • 8-pin socket DV0P4560 50 (1.97) 70 (2.76) 8-pin Unit : mm (inch) 5 11 ±1 (0.43±0.039) 24 (0.94) 4 2 ATC180031 ATA48011 ATA4806 5 41 ±1 (1.61±0.039) 71(2.80) Unit : mm (inch) 28.5 ±1 (1.12±0.039) 3 Cy AQM4801 8 Cy Cx ATA4811 1 Cx AT7881 (only for MGSD) AT785* AT781* AT782* AT7831 ATA4861 ø28.5 R 6-M4 P0.7 ATC180041 38 L (11.6(0.47)) (13.0(0.51)) +1.18 (7.87 –0 ) 2 – ø4.5(0.18) <Circuit diagram> 4.5 ±0.5 (0.18±0.02) 1 ø4.2 ±0.2 (ø0.17±0.008) +30 200 –0 2–ø4.5 x 6.75(0.18 x 0.27) 53.1±1.0(2.09±0.039) 60.0(2.36) 50.0(1.97) 10.0 12.0 (0.39) (0.47) 2.0(0.07) Label <Circuit diagram> DV0P4190 5.5 ±1 (0.22±0.039) 5.0(0.2) AD8013 24.5 (0.96) Unit : mm (inch) Terminal cover (transparent) 75.0(2.95) AW68102 (accessory) AT785* AT781* AT782* AT7831 40(1.57) 28 ±1 (1.1±0.039) 100.0±2.0(3.94±0.08) 88.0(3.46) AD8013 Rail Fastening plate EX • Surge absorber DV0P3611-5, DV0P4170 AT7803 AT7803 [Notes] 1. 10 caps are packed in one bag. 2. We accept the order for caps in unit of bag. 3. Please refer to the motor specification page for each dimensions of the capacitor. Unit : mm (inch) AW68102 (accessory) • DIN terminal block • The capacitor cap delivered together with the motor can be separately available. • Noise filter AT7803 SD MB48X • Capacitor cap 7.0(0.28) EX AW68102 Protective cover Index • Capacitor MGSD AT7803 ATC180031 49 30±10 (1.18±0.39) L+100(3.94) –0 Length Flush mounting frame Cap Options 30±10 (1.18±0.39) Connector 1 ø12 (0.47) VCT222 0.75 mm (0.03 inch) 7-core Part No. Speed controller Connector 2 Brake unit 30±10 (1.18±0.39) L+50(19.7) –0 Socket Brake Unit 30±10 (1.18±0.39) DIN terminal block Unit : m (inch) 6 Tube 0.5 mm (0.02 inch) 7-core Connector 1 (The customer should arrange the recommended components.) These are products of Panasonic Electric Works Co.,Ltd. Unit : mm (inch) 7 DV0P0321 When the distance between the controller and the motor is longer than 1 m (39.37 inch), use a suitable extension cord shown right. Panasonic Electric Works Co.,Ltd. Speed controller Options * Please read your User's manual carefully so that you will understand the operation and safety precautions before attempting to operate the system. D-5 AT7881 ø31.4(ø1.24) 40(1.57) 11-pin AT7811 Black AT7812 AT7813 Gray AT7821 Black AT7822 50(1.97) 74 (2.91) 15(0.59) 40-5.5 x 15(0.22 x 0.59) slot ATA4806 AT7831 12(0.47) Unit : mm (inch) M4P0.7 ATA4806 2-ø4.5(ø0.18) 88 (3.46) 7.5(0.30) 50(1.97) R2(0.08) max. Distance between 2 parallel holes to be 13 mm (0.51 inch) or more.* AT7823 1.5 (0.06) 27(1.06) 5(0.2) • Fastening plate R2(0.08) max. 39 ±0.3 (1.54 ±0.01) Distance between 2 parallel holes to be 21 mm (0.83 inch) or more.* Note 1: Compatible panel thickness is between 1.0 mm and 3.5 mm (0.039 inch and 0.14 inch). Note 2: * The distance between holes when mounting the controllers in parallel. Note 3: Mounting frames shown above are not applicable for EX type controller. * Please read your User's manual carefully so that you will understand the operation and safety precautions before attempting to operate the system. D-6 5(0.2) Distance between 2 parallel holes to be 11 mm (0.43 inch) or more.* 58(2.28) Gray 10(0.39) 39 ±0.3(1.54 ±0.01) 62.8(2.47) MHP-M type 58 (2.28) Unit : mm (inch) R2(0.08) max. 39 ±0.3(1.54 ±0.01) Silver gray Silver gray 10(0.39) Distance between 2 parallel holes to be 6.5 mm (0.26 inch) or more.* 48(1.89) Door 1000±1(39.37±0.039) 15(0.59) Gray Mounting frame UP MHP type 62.8 (2.47) ATA48011 +0.02 43.5 +0.5 0 (1.71 0 ) AT7853 Protective cover 10(0.39) K type 62.8 (2.47) 58 (2.28) Rib • DIN rail • Noise filter MR-2043 10(0.39) Manufacturer: NEC Tokin Corporation 40(1.57) Silver gray AT7852 R2(0.08) max. 53 ±0.3(2.09 ±0.01) Black 48(1.89) 50.6 (1.99) 24(0.94) AT7851 +0.02 50.5 +0.5 0 (1.99 0 ) H type 48(1.89) 66(2.60) Gray Front view 53 ±0.3(2.09 ±0.01) 48(1.89) 26(1.02) 4(0.16) 62.8 (2.47) Color Size of mount hole (unit: mm) Recommended hole size 1. The cover attached after the speed setting prevents wrong operation and serves as a dust cover. 2. The cover is applicable to any of the flush type mounting frames. 50.6(1.99) 17.2(0.68) Index Shape Model No. 53 ±0.3(2.09 ±0.01) Unit : mm (inch) 76 +0.1(2.99 +0.004) ATA4811 Unit : mm (inch) 5.5(0.22) • Flush mounting frame Snap the protective cover into the mounting frame, accessing from the front side of the frame, with the protective cover rib kept warped by fingers pressing on the arrow mark on the protective cover. This can be done, whether or not the mounting frame has a unit in it. Unit : mm (inch) Options 8-pin 11.6(0.46) ø30(ø1.18) .4(ø ø31 ) 1.24 (ø1. ø30 18) 45.6(1.80) 34.6(1.36) 34.6(1 AQM4801 Unit : mm (inch) Brake Unit .36) Unit : mm (inch) 35(1.38) ATA4861 10(0.39) Unit : mm (inch) 49(1.93) Label 10(0.39) E 3.6 x 4.8 (0.14 x 0.19) Unit : mm (inch) 27(1.06) 33(1.30) AD8013 • Protective cover 50(1.97) • Cap Speed controller Recommended components 2.5(0.10) 12(0.47) * Please read your User's manual carefully so that you will understand the operation and safety precautions before attempting to operate the system. D-7