Series 354000 RoHS/WEEE-Compliant DIP-to-SOIC Adapter FEATURES • Convenient, cost-effective means of converting DIP-to-SOIC PC board layouts GENERAL SPECIFICATIONS • SOCKET BODY: black, UL 94V-0 glass-filled 4/6 Nylon 170°C continuous use temperature • PCB: 0.062 [1.58] thick FR-4 or IS410 per IPC4101A/26 with 1-oz. Cu traces, both sides finished with ENIG (Immersion Au over Electroless Ni) • MALE ADAPTOR PIN: Brass 360 1/2-hard per UNS C36000 ASTM-B16-00 • MALE PIN PLATING: 10µ [0.254µ] min. Au per MIL-G-45204 over 100µ [2.54µ] min. Ni per SAE-AMS-QQ-N-290 • FEMALE CONTACT PIN: Brass 360 1/2-hard per UNS C36000 ASTM-B16-00 CUSTOMIZATION: In addition to the standard products shown • FEMALE PIN PLATING: 10μ [0.254µ] min. Au per MIL-G-45204 over 100μ on this page, Aries specializes in custom design and production. [2.54µ] min. Ni per SAE-AMS-QQ-N-290 Special materials, platings, sizes, and configurations can be furnished, depending on the quantity. NOTE: Aries reserves the • 4-FINGER COLLET CONTACT: BeCu per UNS C17200 ASTM B194-01 • FEMALE CONTACT PLATING: 10μ [0.254µ] min. Au per MIL-G-45204 over 50μ right to change product general specifications without notice. [1.27µ] min. Ni per SAE-AMS-QQ-N-290 • CONTACT CURRENT RATING: 3 amps ORDERING INFORMATION • OPERATING TEMPERATURE: 221°F [105°C] XX-354000-X1-RC • INSERTION FORCE: 180g/pin; based on a 0.018 [0.46] dia. test Pins Plating lead 8,14, 16, 20, 24, 28 Au Pin RoHs-compliant • WITHDRAWAL FORCE: 90g/pin; based on a 0.018 [0.46] dia. Series Adapter Pin Options test lead (see P/N Suffix Table) • NORMAL FORCE: 140g/pin; based on a 0.018 [0.46] dia. test 1 = Short Adaptor Pin lead 2 = Long Adaptor Pin • SOCKET ACCEPTS: leads 0.015-0.025 [0.38-0.64] in dia., 0.0100-0.125 [2.54-3.18] long MOUNTING CONSIDERATIONS • SUGGESTED PCB SOLDER PAD SIZE: 0.028 [0.71] min. width ALL DIMENSIONS: INCHES [MILLIMETERS] ALL TOLERANCES: ±0.005 [0.13] UNLESS OTHERWISE SPECIFIED “A” = NO. OF PINS PER ROW x 0.100 [2.54] “B” = (NO. OF PINS PER ROW -1) x 0.100 [2.54] CONSULT FACTORY FOR OTHER SIZES AND CONFIGURATIONS P/N Suffix -11 -21 Pins 8 14 16 20 24 28 Dim. “A” 0.400 [10.16] 0.700 [17.78] 0.800 [20.32] 1.000 [25.40] 1.200 [30.48] 1.400 [35.56] Dim. “X” 0.265 [6.73] 0.325 [8.26] Dim. “Y” 0.050 [1.27] 0.110 [2.79] Dim.“B” Dim.“C” Dim.“D” 0.400 [10.16] 0.100 [2.54] 0.125 [3.18] 0.600 [15.24] 0.300 [7.62] 0.225 [5.72] 0.700 [17.78] 0.350 [8.89] 0.225 [5.72] 0.900 [22.86] 0.450 [11.43] 0.275 [6.99] 1.100 [27.94] 0.550 [13.97] 0.325 [8.26] 1.300 [33.02] 0.650 [16.51] 0.375 [9.53] Bristol, PA 19007-6810 USA TEL (215) 781-9956 • FAX (215) 781-9845 WWW.ARIESELEC.COM • [email protected] PRINTOUTS OF THIS DOCUMENT MAY BE OUT OF DATE AND SHOULD BE CONSIDERED UNCONTROLLED 18009RC Rev. AA