Series 6621 Inverter Sockets FEATURES: • Inverted configuration allows the socket to be wave soldered on the component side of the PCB and the device socketed through a window on the solder side of the PCB. • Available on .600 [15.24] centers. Consult factory for other sizes. SPECIFICATIONS: • Body material is Black UL 94 V-0 Glass-filled 4/6 Nylon. • Bifurcated contacts are Grade A spring-tempered Phosphor Bronze per QQ-B-750. • Contact plating: -30 = 200μ” min. Matte Tin per ASTM B545-97 over 50μ” min Nickel per SAE-AMS-QQ-N-290 -30TL = 200μ” min. Bright 90/10 Tin/Lead per MIL-T10727 Type 1 over 50μ” min. Nickel per SAE-AMS-QQN-290. • Current rating=1.5 Amp. • Operating temperature= -67°F to 221°F [-55°C to105°C]. • Accepts flat leads up to .014 thk. x .020 wide [.36-.51], round leads up to .020 [.51] in diameter . • Accepts lead lengths from seating plane from .075-.160 [1.91-4.06]. MOUNTING CONSIDERATIONS: •Suggested PCB hole size=.044 ± .002 [1.15 ± .05]. Note: Aries specializes in custom design and production. In addition to the standard products shown on this page, special materials, platings, sizes, and configurations can be furnished, depending on quantities. Aries reserves the right to change product specifications without notice. ORDERING INFORMATION XX-6621-30 XX No. of pins: 8 to 40, 48 All tolerances ± .005 [.13] unless otherwise specified Series Plating option: TL = Tin/Lead Tin over Nickel plated wire wrap pin “A”=(NO. OF PINS PER ROW X .100 [2.54]) + .050 [1.27] “B”=(NO. OF PINS PER ROW - 1) X .100 [2.54] ALL DIMENSIONS: INCHES [MILLIMETERS] CONTACT DETAIL Bristol, PA 19007-6810 USA TEL (215) 781-9956 • FAX (215) 781-9845 WWW.ARIESELEC.COM • [email protected] 14007 REV. C PRINTOUTS OF THIS DOCUMENT MAY BE OUT OF DATE AND SHOULD BE CONSIDERED UNCONTROLLED