Series 115, 116, 117 DIP-ER™ Logic Jumper FEATURES • Wide Array of DIP Jumper Configurations and Wiring Possibilities • Reliable, Electronically-tested Solder Connections • Strain Relief by Ultrasonically-welded Protective Covers • Easy Identification and Tracing with 10-color Cable • Point-to-point Wiring ORDERING INFORMATION GENERAL SPECIFICATIONS • HEADER BODY: black UL 94V-0 glass-filled 4/6 Nylon • HEADER PINS: Brass, 1/2-hard • PIN PLATING: 10µ [0.25µ] min. Au per MIL-G-45204 over 50µ [1.27µ] min. Ni per SAE AMS-QQ-N290B • CABLE INSULATION: UL Style 2697 flame-retardant Polyvinyl Chloride (PVC), 0.010 [0.25] nominal thickness • CONDUCTORS: 28-AWG, 7/36-strand, tinned Cu per ASTM B 33 • CABLE CURRENT RATING: 1 amp at 10°C [50°F] above ambient • CABLE VOLTAGE RATING: 300V • CABLE TEMPERATURE RATING: 176°F [80°C] Centers “C” Dim. “D” • INSULATION RESISTANCE: 1010Ω (10 ft. [3 meters] min.) XX-XXX XXX Series 115, 116, 117 Length “L” (inches) 2.00" = 002 (min) 2.50" = 002.5 3.00" = 003 Etc. Available Sizes 0.300 [7.62] 0.395 [10.03] 8, 14, 16, 18, 20 MOUNTING CONSIDERATIONS 0.400 [10.16] 0.495 [12.57] 22 • SUGGESTED PCB HOLE SIZE: 0.033 ±0.002 [0.86 ±0.05] dia. 0.600 [15.24] 0.695 [17.65] 24, 28, 40 ALL DIMENSIONS: INCHES [MILLIMETERS] ALL TOLERANCES: ±0.005 [0.13] UNLESS OTHERWISE SPECIFIED CONSULT FACTORY FOR OTHER SIZES AND CONFIGURATIONS No. of Conductors (See Table) CUSTOMIZATION: ARIES SPECIALIZES IN CUSTOM DESIGN AND PRODUCTION. SPECIAL MATERIALS, PLATINGS, SIZES, AND CONFIGURATIONS CAN BE FURNISHED, DEPENDING ON QUANTITY. ARIES RESERVES THE RIGHT TO CHANGE PRODUCT GENERAL SPECIFICATIONS WITHOUT NOTICE PRINTOUTS OF THIS DOCUMENT MAY BE OUT-OF-DATE AND SHOULD BE CONSIDERED UNCONTROLLED 2609 Bartram Road • Bristol, PA 19007-6810 USA TEL 215-781-9956 • FAX 215-781-9845 WWW.ARIESELEC.COM • [email protected] 11011 Rev. 5.3 1 of 1