P600A, P600B, P600D, P600G, P600J, P600K, P600M Datasheet

P600A, P600B, P600D, P600G, P600J, P600K, P600M
www.vishay.com
Vishay General Semiconductor
General Purpose Plastic Rectifier
FEATURES
• Low forward voltage drop
• Low leakage current
• High forward current capability
• High forward surge capability
• Solder dip 275 °C max. 10 s, per JESD 22-B106
P600
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
TYPICAL APPLICATIONS
For use in general purpose rectification of power supplies,
inverters, converters and freewheeling diodes application.
PRIMARY CHARACTERISTICS
IF(AV)
6.0 A
VRRM
50 V, 100 V, 200 V, 400 V, 600 V,
800 V, 1000 V
IFSM
400 A
VF
0.9 V, 1.0 V
IR
5.0 μA
TJ max.
150 °C
Package
P600
Diode variations
Single die
MECHANICAL DATA
Case: P600, void-free molded epoxy body
Molding compound meets UL 94 V-0 flammability rating
Base P/N-E3 - RoHS-compliant, commercial grade
Terminals: Matte tin plated leads, solderable
J-STD-002 and JESD 22-B102
E3 suffix meets JESD 201 class 1A whisker test
per
Polarity: Color band denotes cathode end
MAXIMUM RATINGS (TA = 25 °C unless otherwise noted)
PARAMETER
SYMBOL
P600A
P600B
P600D
P600G
P600J
P600K
P600M
UNIT
Max. repetitive peak reverse voltage
VRRM
50
100
200
400
600
800
1000
V
Max. RMS voltage
VRMS
35
70
140
280
420
560
700
V
VDC
50
100
200
400
600
800
1000
V
Max. DC blocking voltage
Max. average
forward rectified
current at
TA = 60 °C, 0.375" (9.5 mm)
lead length (fig. 1)
TL = 60 °C, 0.125" (3.18 mm)
lead length (fig. 2)
Peak forward surge current 8.3 ms single half
sine-wave superimposed on rated load
Operating junction and storage temperature range
6.0
IF(AV)
A
22
IFSM
400
A
TJ, TSTG
- 50 to + 150
°C
ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)
PARAMETER
TEST CONDITIONS
Max. instantaneous forward
voltage
6.0 A
Max. DC reverse current at
rated DC blocking voltage
SYMBOL
VF
100 A
TA = 25 °C
TA =100 °C
IR
P600A
P600B
P600D P600G
P600J
P600K P600M UNIT
0.90
1.0
1.30
1.4
V
5.0
μA
1.0
mA
Typical reverse recovery time
IF = 0.5 A, IR = 1.0 A,
Irr = 0.25 A
trr
2.5
μs
Typical junction capacitance
4.0 V, 1 MHz
CJ
150
pF
Revision: 13-Aug-13
Document Number: 88692
1
For technical questions within your region: [email protected], [email protected], [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
P600A, P600B, P600D, P600G, P600J, P600K, P600M
www.vishay.com
Vishay General Semiconductor
THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)
PARAMETER
SYMBOL
Typical thermal resistance
P600A
P600B
P600D P600G
RJA (1)
20
RJL (1)
4.0
P600J
P600K P600M UNIT
°C/W
Note
(1) Thermal resistance from junction to ambient and from junction to lead at 0.375" (9.5 mm) lead length, PCB mounted with 1.1" x 1.1"
mm x 30 mm) copper pads
(30
ORDERING INFORMATION (Example)
PREFERRED P/N
UNIT WEIGHT (g)
PREFERRED PACKAGE CODE
BASE QUANTITY
DELIVERY MODE
P600J-E3/54
2.1
54
800
13" diameter paper tape and reel
P600J-E3/73
2.1
73
300
Ammo pack packaging
RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted)
600
60 Hz Resistive
or Inductive Load
5.0
4.0
3.0
2.0
1.1" x 1.1" (30 mm x 30 mm)
Copper Pads
1.0
Standard P.C.B. Mounting
0.375" (9.5 mm) Lead Length
8.3 ms Single Half Sine-Wave
Peak Forward Surge Current (A)
Average Forward Rectified Current (A)
6.0
0
400
TA = 25 °C
300
TA = 150 °C
200
100
0
0
20
40
60
1
100 120 140 160 180 200
80
100
10
Ambient Temperature (°C)
Number of Cycles at 60 Hz
Fig. 1 - Max. Forward Current Derating Curve
Fig. 3 - Typical Instantaneous Forward Characteristics
30
=
60 Hz Resistive
or Inductive Load
0.
12
25
L
=
5"
0.
(3
.1
8
25
20
L=
"(
0.3
75
15
L=
10
m
m
6.
)
35
Both Leads Attached
to Heat Sinks with
Length as Shown “L”
m
m
)
"(
9.5
mm
)
0.62
5" (1
5
.8 m
m)
5
0
0
20
40
60
80
100 120 140 160 180 200
Instantaneous Forward Current (A)
100
L
Average Forward Current (A)
500
TJ = 25 °C
Pulse Width = 300 μs
1 % Duty Cycle
10
1
0.1
0.01
0.4
0.6
0.8
1.0
1.2
1.4
1.6
Lead Temperature (°C)
Instantaneous Forward Voltage (V)
Fig. 2 - Max. Non-repetitive Forward Surge Current
Fig. 4 - Typical Instantaneous Forward Characteristics
Revision: 13-Aug-13
Document Number: 88692
2
For technical questions within your region: [email protected], [email protected], [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
P600A, P600B, P600D, P600G, P600J, P600K, P600M
www.vishay.com
Vishay General Semiconductor
100
10
Transient Thermal Impedance (°C/W)
Instantaneous Reverse Current (μA)
100
TJ = 125 °C
TJ = 100 °C
1
TJ = 25 °C
0.1
20
40
60
80
1
0.1
0.01
0.01
0
10
100
0.1
1
10
100
Percent of Rated Peak Reverse Voltage (%)
t - Pulse Duration (s)
Fig. 5 - Typical Reverse Characteristics
Fig. 6 - Typical Transient Thermal Impedance
PACKAGE OUTLINE DIMENSIONS in inches (millimeters)
P600
1.0 (25.4)
MIN.
0.360 (9.1)
0.340 (8.6)
0.360 (9.1)
0.340 (8.6)
0.052 (1.32)
0.048 (1.22)
DIA.
Revision: 13-Aug-13
1.0 (25.4)
MIN.
Document Number: 88692
3
For technical questions within your region: [email protected], [email protected], [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free
requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference
to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21
conform to JEDEC JS709A standards.
Revision: 02-Oct-12
1
Document Number: 91000