www.osram.com Product Information LEDSTAR® CLASSIC B25 frosted & clear sparkling Benefits Key Features • Replacement for 25W Incandescent lamp • Dimension comparable Classic B Incandescent • Good thermal management • 4W LED lamp as high-quality replacement for a 25W incandescent candle lamp • Non Dimmable • E14 base • Available in 2700K warm white and 4000K • 15,000 hrs • UV and NIR radiation free • Mercury free Product Wattage CCT lm Base Diameter Length Weight Viewing Angle EAN10 EAN40 (ship.unit) Ship. unit LEDSTAR CLASSIC B25 Clear Sparkling 4 2700 250 E14 38 mm 105 mm 52 g 200° 40502899232631 4052899232648 10 LEDSTAR CLASSIC B25 frosted 4 2700 250 E14 38 mm 105 mm 50 g 200° 40502899232655 4052899232662 10 4 4000 250 E14 38mm 105mm 55g 200° 4052899232778 4052899232785 10 LEDSTAR CLASSIC B25 frosted ¹With many common dimmers, see also www.osram.com/dim 2 Typical values. All the technical parameters apply to the entire lamp. In view of the complex manufacturing process for light emitting diodes, the typical values given above for the technical LED parameters are merely statistical values that do not necessarily correspond to the actual technical parameters of an individual product; individual products may vary from the typical values. 3 The average lifetime of LED lamps is defined as the number of hours when the light output of 50% of a large group of identical lamps goes below 70% of its initial luminous flux (L70B50, IEC60969).The lifetime is estimated at room temperature (25°C), free air burning, base up burning position and at rated voltage. LEDSTAR CLASSIC B Clear Sparkling & Frosted BU LP PPM Led Lamps For internal use only 1 www.osram.com Product Information LEDSTAR® CLASSIC B25 advanced frosted & clear sparkling Common Characteristics3 Average lifetime4 Switching cycles Casing material Starting time Warm up time for 60% light Power factor 15,000 hrs (30s on, 30s off) 100,000 Plastic <0.2 s 0.0 s 0.6 Lamp Current Irush current Tc temperature max.5 CRI Mercury max. 30 mA 2A 88°C 80 0.0 mg TC Disposal information • Lamps with WEEE sign can be returned at specific collection points. • LED lamps have to be disposed as special waste. 3 Typical values. All the technical parameters apply to the entire lamp. In view of the complex manufacturing process for light emitting diodes, the typical values given above for the technical LED parameters are merely statistical values that do not necessarily correspond to the actual technical parameters of an individual product; individual products may vary from the typical values. 4 The average lifetime of LED lamps is defined as the number of hours when the light output of 50% of a large group of identical lamps goes below 70% of its initial luminous flux (L70B50, IEC60969).The lifetime is estimated at room temperature (25°C), free air burning, base up burning position and at rated voltage. 5 The Tc is defined as the highest permissible temperature which may occur on the outer surface of the LED lamp (in the indicated position) under normal operating conditions and at the rated voltage/current/power or the maximum of the rated voltage/current/power range (DIN EN 62031: 2009-01) LEDSTAR CLASSIC B Frosted & Clear Sparkling BU LP PPM Led Lamps For internal use only 2 www.osram.com Product Information LEDSTAR® CLASSIC B25 advanced frosted & clear sparkling Application information • • • • • Suitable for indoor application. For outdoor applications and operation in damp locations special approved fixture are required. Input voltage: 220-240V Storage temperature & humidity conditions (-20°C up to +40°C, at max. 95% relative humidity) Operating temperature & humidity conditions (-20°C up to +40°C, at max. 95% relative humidity) Lamp conformity • • • • • • • • • • • 2004/108/EC Electromagnetic compatibility (EMC) 244/2009 Ecodesign requirements for non-directional household lamps IEC/ PAS 62612 Self ballasted LED-lamps for general lighting services – Performance requirements 2009/125/EC Ecodesign requirements for energy related products 2011/65/EC Restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS) 1907/2006 Registration, Evaluation, Authorisation and Restriction of Chemicals (REACH Regulation) 2002/96/EC Waste Electrical and Electronic Equipment Directive (WEEE) EN 62471 Photobiological safety of lamps and lamp systems EN 55015 Limits and methods of measurement of radio disturance EN 61000-3-2 Electromagnetic compatibility – Limits for harmonic current emission EN 61000-3-3 Electromagnetic compatibility – Limitation of voltage changes, voltage fluactuations, flicker in public low voltage supply systems • EN61547 Electromagnetic compatibility immunity requirements • 1194/2012 Eco design requirement for directional lamps, light emitting diode lamps and related equipment (DIM II) • IEC 62560 self-ballasted LED-lamps for general lighting services by voltage >50V – Safety specifications • 874/2012/EU Energy labeling of electrical lamps and luminaires LEDSTAR CLASSICB25 Frosted & Clear Sparkling BU LP PPM Led Lamps For internal use only 3