PANASONIC LNJ826W86RA

This product complies with the RoHS Directive (EU 2002/95/EC).
Light Emitting Diodes
LNJ826W86RA
Surface Mounting Chip LED
UTSS Type

Absolute Maximum Ratings Ta = 25°C
Parameter

Lighting Color
Symbol
Rating
Unit
Power dissipation
PD
55
mW
Forward current
IF
20
mA
Pulse forward current *
IFP
60
mA
Reverse voltage
VR
4
V
Operating ambient temperature
Topr
–30 to +85
°C
Storage temperature
Tstg
–40 to +100
°C
Soft Orange
Note) *: The conditon of IFP is duty 10%, pulse width 10 ms.

Electro-Optical Characteristics Ta = 25°C±3°C
Parameter
Symbol
Conditions
Min
Typ
13.5
16.9
Luminous intensity
IO
IF = 10 mA
Reverse current
IR
VR = 4 V
Forward voltage
VF
IF = 10 mA
1.92
Peak emission wavelength
λP
IF = 10 mA
610
Dominant emission wavelength
λd
IF = 10 mA
Spectral half band width
Δλ
IF = 10 mA
600
Max
Unit
mcd
100
µA
2.50
V
nm
605
610
nm
15
nm
Note) Be careful of the product destruction by static electricity.
I O  IF
10
5
1
3
5
10
30
50
1 000
Relative luminous intensity (%)
50
1
IF  VF
100
Forward current IF (mA)
Luminous intensity IO (mcd)
100
50
30
10
5
3
1
100
1.6
Forward current IF (mA)
1.8
2.0
2.2
50°
Peak emission wavelength λP (nm)
90°
100
40°
50°
60°
40°
70°
20°
80°
700
30°
60°
70°
20
10° 20°
80°
60°
40
0°
80
60
40
20
0
Forward current IF (mA)
Relative luminous intensity (%)
30°
20° 10°
40°
60
Publication date: December 2008
50
30
−20
0
20
40
60
80
100
IF  Ta
25
80
650
100
Ambient temperature Ta (°C)
Directive characteristics
600
300
Forward voltage VF (V)
100
550
500
10
2.4
Relative luminous intensity  λP
0
Relative luminous intensity  Ta
20
15
10
5
80°
20
40
60
Relative luminous intensity (%)
SHD00604CEK
80
90°
100
0
0
20
40
60
80
100
Ambient temperature Ta (°C)
1
This product complies with the RoHS Directive (EU 2002/95/EC).
LNJ826W86RA

Package (Unit: mm)
KLTFTN2K2600
0.29±0.1
2
1
0. 8± 0.15
0.29±0.1
0. 35± 0. 07
0. 13± 0. 1
0. 8± 0.15
1.1±0.1
Index Mark
1.6±0.15

Pin name
1: Anode
2: Cathode
2
SHD00604CEK
Request for your special attention and precautions in using the technical information and
semiconductors described in this book
(1) If any of the products or technical information described in this book is to be exported or provided to non-residents, the laws and
regulations of the exporting country, especially, those with regard to security export control, must be observed.
(2) The technical information described in this book is intended only to show the main characteristics and application circuit examples
of the products. No license is granted in and to any intellectual property right or other right owned by Panasonic Corporation or any
other company. Therefore, no responsibility is assumed by our company as to the infringement upon any such right owned by any
other company which may arise as a result of the use of technical information described in this book.
(3) The products described in this book are intended to be used for standard applications or general electronic equipment (such as office
equipment, communications equipment, measuring instruments and household appliances).
Consult our sales staff in advance for information on the following applications:
– Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support
systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the products may directly jeopardize life or harm the human body.
– Any applications other than the standard applications intended.
(4) The products and product specifications described in this book are subject to change without notice for modification and/or improvement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product
Standards in advance to make sure that the latest specifications satisfy your requirements.
(5) When designing your equipment, comply with the range of absolute maximum rating and the guaranteed operating conditions
(operating power supply voltage and operating environment etc.). Especially, please be careful not to exceed the range of absolute
maximum rating on the transient state, such as power-on, power-off and mode-switching. Otherwise, we will not be liable for any
defect which may arise later in your equipment.
Even when the products are used within the guaranteed values, take into the consideration of incidence of break down and failure
mode, possible to occur to semiconductor products. Measures on the systems such as redundant design, arresting the spread of fire
or preventing glitch are recommended in order to prevent physical injury, fire, social damages, for example, by using the products.
(6) Comply with the instructions for use in order to prevent breakdown and characteristics change due to external factors (ESD, EOS,
thermal stress and mechanical stress) at the time of handling, mounting or at customer's process. When using products for which
damp-proof packing is required, satisfy the conditions, such as shelf life and the elapsed time since first opening the packages.
(7) This book may be not reprinted or reproduced whether wholly or partially, without the prior written permission of our company.
20080805