MKT467, MKT468, MKT469 www.vishay.com Vishay BCcomponents DC Film Capacitors MKT Radial Lacquered Type 467 l FEATURES w • Available taped and loose in box • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 h Seating plane (1) APPLICATIONS α Blocking and coupling, bypass and energy reservoir. (2) REFERENCE STANDARDS lt IEC 60384-2 Ø dt A (3) 0.4 P +- 0.2 Notes (1) Hole Ø 1.0 mm for d = 0.6 mm t (2) 0 a < 50° (3) A = 2.0 mm ± 0.5 mm C-value; tolerance; rated voltage; code for manufacturer; manufacturer’s type; manufacturer’s logo DIELECTRIC Polyester film 468 w l MARKING w l ELECTRODES Metallized h’ h Seating plane (1) α° RATED (DC) VOLTAGE 100 V, 250 V, 400 V, 630 V F’ (3) (2) lt F RATED (AC) VOLTAGE H 63 V, 160 V, 220 V, 250 V 10 P A (4) Ø dt Ø dt 15 Flame retardant epoxy material (UL-class 94 V-0) Notes (1) Hole Ø 1.0 mm for d = 0.8 mm t (2) 0 < 50° (3) |F - F’| < 0.3 mm F = 7.5 mm + 0.6 mm / - 0.1 mm (4) A = 2.5 mm + 1.4 mm / - 0.5 mm ± 0.3 mm CLIMATIC TESTING CLASS ACCORDING TO IEC 60068-1 55/105/56 RATED TEMPERATURE 85 °C 469 Straight Leads w l Seating plane (1) ENCAPSULATION CAPACITANCE RANGE (E12 SERIES) 467: 0.001 μF to 1.0 μF 468: 0.039 μF to 10.0 μF 469: 0.001 μF to 1.0 μF h CAPACITANCE TOLERANCE ≤ 1.5 ± 10 %, ± 5 % lt Ø 1.3 LEADS Tinned wire P ± 0.4 Note (1) Hole Ø 1.0 for d = 0.6 mm t CONSTRUCTION Mono construction Revision: 23-Nov-15 Ø dt MAXIMUM APPLICATION TEMPERATURE 105 °C DETAIL SPECIFICATION For more detailed data and test requirements contact: [email protected] Document Number: 28105 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MKT467, MKT468, MKT469 www.vishay.com Vishay BCcomponents COMPOSITION OF CATALOG NUMBER: 467 TYPE AND PITCHES 467 CAPACITANCE (numerically) 10.0 mm MULTIPLIER (nF) 0.1 2 1 3 10 4 100 5 Example: 104 = 10 x 10 = 100 nF BFC2 2222 (*) 467 467 XX XX YY YY Y Y (*) Old ordering number TYPE PACKAGING Loose in box 467 Taped on reel (1) LEAD CONFIGURATION Lead length 3.5 mm + 1.0 mm/- 0.5 mm Lead length 19.0 mm ± 4.0 mm H = 16.0 mm; P0 = 12.7 mm Reel diameter = 500 mm C-TOL. ± 10 % ±5% ± 10 % ±5% ± 10 % ±5% 100 V 04 05 51 52 06 07 PREFERRED TYPES 250 V 400 V 16 28 17 29 53 55 54 56 18 30 19 31 630 V 40 41 57 58 42 43 Note (1) For detailed tape specifications refer to packaging information: www.vishay.com/doc?28139 SPECIFIC REFERENCE DATA: 467 DESCRIPTION Tangent of loss angle: C 0.1 μF 0.1 μF < C 0.47 μF 0.47 μF < C 1.0 μF Rated voltage pulse slope (dU/dt)R at Imax. = 12.5 mm R between leads, for C 0.33 μF at 100 V; 1 min at 500 V; 1 min R between leads, for C > 0.33 μF at 100 V; 1 min at 500 V; 1 min R between interconnecting leads and casing, at 100 V; 1 min at 500 V; 1 min Withstanding (DC) voltage (cut off current 10 mA) (1); rise time 1000 V/s Withstanding (DC) voltage between leads and case Maximum application temperature at 1 kHz 75 x 10-4 75 x 10-4 75 x 10-4 100 VDC 30 V/μs > 15 000 M VALUE at 10 kHz 120 x 10-4 120 x 10-4 120 x 10-4 250 VDC 400 VDC 120 V/μs 170 V/μs > 30 000 M at 100 kHz 200 x 10-4 225 x 10-4 630 VDC 120 V/μs > 30 000 M > 30 000 M > 5000 s > 10 000 s > 10 000 s > 10 000 s > 30 000 M 160 V; 1 min 400 V; 1 min 200 V; 1 min 500 V; 1 min 640 V; 1 min 1008 V; 1 min 800 V; 1 min 1260 V; 1 min 105 °C Note (1) See “Voltage Proof Test for Metallized Film Capacitors”: www.vishay.com/doc?28169 Revision: 23-Nov-15 Document Number: 28105 2 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MKT467, MKT468, MKT469 www.vishay.com Vishay BCcomponents URDC = 100 V; URAC = 63 V CATALOG NUMBER BFC2 467 XXYYY AND PACKAGING LOOSE IN BOX C (μF) DIMENSIONS wmax. x hmax. x lmax. (mm) MASS (g) (1) lt = 3.5 mm + 1.0 mm / - 0.5 mm REEL lt = 19.0 mm ± 4.0 mm H = 16.0 mm; P0 = 12.7 mm C-TOL. = ± 10 % C-TOL. = ±5% C-TOL. = ± 10 % C-TOL. = ±5% C-TOL. = ± 10 % C-TOL. = ±5% XX (SPQ) XX (SPQ) XX (SPQ) XX (SPQ) XX (SPQ) XX (SPQ) C-VALUE ..YYY Pitch = 10.0 mm ± 0.4 mm; dt = 0.60 mm ± 0.06 mm 563 0.056 0.068 4.0 x 14.0 x 12.5 0.37 0.082 04... (2000) 05... (2000) 51... (1500) 52... (1500) 06... (1500) 07... (1500) 0.10 683 823 104 0.12 4.3 x 14.3 x 12.5 0.40 04... (2000) 05... (2000) 51... (1500) 52... (1500) 06... (1500) 07... (1500) 124 0.15 4.0 x 14.0 x 12.5 0.37 04... (2000) 05... (2000) 51... (1500) 52... (1500) 06... (1500) 07... (1500) 154 0.18 4.2 x 14.2 x 12.5 0.39 04... (2000) 05... (2000) 51... (1500) 52... (1500) 06... (1500) 07... (1500) 184 0.22 4.5 x 14.6 x 12.5 0.43 04... (2000) 05... (2000) 51... (1500) 52... (1500) 06... (1300) 07... (1300) 224 0.27 4.2 x 14.2 x 12.5 0.39 04... (2000) 05... (2000) 51... (1500) 52... (1500) 06... (1500) 07... (1500) 274 0.33 4.6 x 14.6 x 12.5 0.44 04... (2000) 05... (2000) 51... (1500) 52... (1500) 06... (1300) 07... (1300) 334 0.39 4.0 x 14.0 x 12.5 0.37 04... (2000) 05... (2000) 51... (1500) 52... (1500) 06... (1500) 07... (1500) 394 0.47 4.2 x 14.2 x 12.5 0.39 04... (2000) 05... (2000) 51... (1500) 52... (1500) 06... (1500) 07... (1500) 474 0.56 4.6 x 14.6 x 12.5 0.44 04... (2000) 05... (2000) 51... (1500) 52... (1500) 06... (1300) 07... (1300) 564 0.68 5.0 x 15.0 x 12.5 0.50 04... (1500) 05... (1500) 51... (1250) 52... (1250) 06... (1200) 07... (1200) 684 0.82 5.5 x 15.5 x 12.5 0.60 04... (1500) 05... (1500) 51... (1000) 52... (1000) 06... (1100) 07... (1100) 824 1.0 6.0 x 16.0 x 12.5 0.75 04... (1250) 05... (1250) 51... (1000) 52... (1000) 06... (1000) 07... (1000) 105 Notes • SPQ = Standard Packing Quantity (1) Net weight for short lead product only Revision: 23-Nov-15 Document Number: 28105 3 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MKT467, MKT468, MKT469 www.vishay.com Vishay BCcomponents URDC = 250 V; URAC = 160 V CATALOG NUMBER BFC2 467 XXYYY AND PACKAGING LOOSE IN BOX C (μF) DIMENSIONS wmax. x hmax. x lmax. (mm) MASS (g) (1) lt = 3.5 mm + 1.0 mm /- 0.5 mm REEL lt = 19.0 mm ± 4.0 mm H = 16.0 mm; P0 = 12.7 mm C-VALUE C-TOL. = ± 10 % C-TOL. = ±5% C-TOL. = ± 10 % C-TOL. = ±5% C-TOL. = ± 10 % C-TOL. = ±5% XX (SPQ) XX (SPQ) XX (SPQ) XX (SPQ) XX (SPQ) XX (SPQ) ..YYY Pitch = 10.0 mm ± 0.4 mm; dt = 0.60 mm ± 0.06 mm 0.027 4.2 x 14.2 x 12.5 0.39 16... (2000) 17... (2000) 53... (1500) 54... (1500) 18... (1500) 19... (1500) 273 0.033 4.6 x 14.6 x 12.5 0.44 16... (2000) 17... (2000) 53... (1500) 54... (1500) 18... (1300) 19... (1300) 333 0.039 4.0 x 14.0 x 12.5 0.37 16... (2000) 17... (2000) 53... (1500) 54... (1500) 18... (1500) 19... (1500) 393 0.047 4.1 x 14.1 x 12.5 0.38 16... (2000) 17... (2000) 53... (1500) 54... (1500) 18... (1500) 19... (1500) 473 0.056 4.0 x 14.0 x 12.5 0.37 16... (2000) 17... (2000) 53... (1500) 54... (1500) 18... (1500) 19... (1500) 563 0.068 4.1 x 14.1 x 12.5 0.38 16... (2000) 17... (2000) 53... (1500) 54... (1500) 18... (1500) 19... (1500) 683 0.082 4.4 x 14.4 x 12.5 0.41 16... (2000) 17... (2000) 53... (1500) 54... (1500) 18... (1500) 19... (1500) 823 0.10 4.0 x 14.0 x 12.5 0.37 16... (2000) 17... (2000) 53... (1500) 54... (1500) 18... (1500) 19... (1500) 104 0.12 4.3 x 14.3 x 12.5 0.40 16... (2000) 17... (2000) 53... (1500) 54... (1500) 18... (1500) 19... (1500) 124 0.15 4.8 x 14.8 x 12.5 0.48 16... (2000) 17... (2000) 53... (1250) 54... (1250) 18... (1300) 19... (1300) 154 0.18 5.2 x 15.2 x 12.5 0.52 16... (1500) 17... (1500) 53... (1000) 54... (1000) 18... (1200) 19... (1200) 184 0.22 5.8 x 15.8 x 12.5 0.67 16... (1500) 17... (1500) 53... (1000) 54... (1000) 18... (1100) 19... (1100) 224 Notes • SPQ = Standard Packing Quantity (1) Net weight for short lead product only Revision: 23-Nov-15 Document Number: 28105 4 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MKT467, MKT468, MKT469 www.vishay.com Vishay BCcomponents URDC = 400 V; URAC = 220 V CATALOG NUMBER BFC2 467 XXYYY AND PACKAGING LOOSE IN BOX C (μF) DIMENSIONS wmax. x hmax. x lmax. (mm) MASS (g) (1) lt = 3.5 mm + 1.0 mm / - 0.5 mm REEL lt = 19.0 mm ± 4.0 mm H = 16.0 mm; P0 = 12.7 mm C-VALUE C-TOL. = ± 10 % C-TOL. = ±5% C-TOL. = ± 10 % C-TOL. = ±5% C-TOL. = ± 10 % C-TOL. = ±5% XX (SPQ) XX (SPQ) XX (SPQ) XX (SPQ) XX (SPQ) XX (SPQ) 0.43 28... (2000) 29... (2000) 55... (1500) 56... (1500) 30... (1300) 31... (1300) 29... (2000) 55... (1500) 56... (1500) 30... (1500) 31... (1500) 222 ..YYY Pitch = 10.0 mm ± 0.4 mm; dt = 0.60 mm ± 0.06 mm 0.0010 0.0012 0.0015 102 4.5 x 14.5 x 12.5 0.0018 122 152 182 0.0022 4.0 x 14.0 x 12.5 0.37 28... (2000) 0.0027 4.3 x 14.3 x 12.5 0.40 28... (2000) 29... (2000) 55... (1500) 56... (1500) 30... (1500) 31... (1500) 272 0.0033 4.6 x 14.6 x 12.5 0.44 28... (2000) 29... (2000) 55... (1500) 56... (1500) 30... (1300) 31... (1300) 332 0.0039 4.0 x 14.0 x 12.5 0.37 28... (2000) 29... (2000) 55... (1500) 56... (1500) 30... (1500) 31... (1500) 393 0.0047 4.1 x 14.2 x 12.5 0.38 28... (2000) 29... (2000) 55... (1500) 56... (1500) 30... (1500) 31... (1500) 472 0.0056 4.6 x 14.6 x 12.5 0.44 28... (2000) 29... (2000) 55... (1500) 56... (1500) 30... (1300) 31... (1300) 562 0.0068 4.2 x 14.2 x 12.5 0.39 28... (2000) 29... (2000) 55... (1500) 56... (1500) 30... (1500) 31... (1500) 682 0.0082 4.6 x 14.6 x 12.5 0.44 28... (2000) 29... (2000) 55... (1500) 56... (1500) 30... (1300) 31... (1300) 822 0.010 4.1 x 14.1 x 12.5 0.38 28... (2000) 29... (2000) 55... (1500) 56... (1500) 30... (1500) 31... (1500) 103 0.012 4.5 x 14.5 x 12.5 0.43 28... (2000) 29... (2000) 55... (1500) 56... (1500) 30... (1300) 31... (1300) 123 0.015 4.1 x 14.1 x 12.5 0.38 28... (2000) 29... (2000) 55... (1500) 56... (1500) 30... (1500) 31... (1500) 153 0.018 4.5 x 14.5 x 12.5 0.43 28... (2000) 29... (2000) 55... (1500) 56... (1500) 30... (1300) 31... (1300) 183 0.022 4.0 x 14.0 x 12.5 0.37 28... (2000) 29... (2000) 55... (1500) 56... (1500) 30... (1500) 31... (1500) 223 0.027 4.2 x 14.2 x 12.5 0.39 28... (2000) 29... (2000) 55... (1500) 56... (1500) 30... (1500) 31... (1500) 273 0.033 4.6 x 14.7 x 12.5 0.44 28... (2000) 29... (2000) 55... (1500) 56... (1500) 30... (1300) 31... (1300) 333 0.039 5.0 x 14.9 x 12.5 0.50 28... (1500) 29... (1500) 55... (1250) 56... (1250) 30... (1200) 31... (1200) 393 0.047 4.1 x 14.1 x 12.5 0.38 28... (2000) 29... (2000) 55... (1500) 56... (1500) 30... (1500) 31... (1500) 473 0.056 4.4 x 14.4 x 12.5 0.41 28... (2000) 29... (2000) 55... (1500) 56... (1500) 30... (1500) 31... (1500) 563 0.068 4.8 x 14.8 x 12.5 0.48 28... (2000) 29... (2000) 55... (1250) 56... (1250) 30... (1300) 31... (1300) 683 0.082 5.4 x 15.3 x 12.5 0.57 28... (1500) 29... (1500) 55... (1000) 56... (1000) 30... (1200) 31... (1200) 823 0.10 5.7 x 15.7 x 12.5 0.64 28... (1500) 29... (1500) 55... (1000) 56... (1000) 30... (1100) 31... (1100) 104 Notes • SPQ = Standard Packing Quantity (1) Net weight for short lead product only Revision: 23-Nov-15 Document Number: 28105 5 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MKT467, MKT468, MKT469 www.vishay.com Vishay BCcomponents URDC = 630 V; URAC = 250 V CATALOG NUMBER BFC2 467 XXYYY AND PACKAGING LOOSE IN BOX C (μF) DIMENSIONS wmax. x hmax. x lmax. (mm) MASS (g) (1) lt = 3.5 mm + 1.0 mm / - 0.5 mm REEL lt = 19.0 mm ± 4.0 mm H = 16.0 mm; P0 = 12.7 mm C-VALUE C-TOL. = ± 10 % C-TOL. = ±5% C-TOL. = ± 10 % C-TOL. = ±5% C-TOL. = ± 10 % C-TOL. = ±5% XX (SPQ) XX (SPQ) XX (SPQ) XX (SPQ) XX (SPQ) XX (SPQ) ..YYY Pitch = 10.0 mm ± 0.4 mm; dt = 0.60 mm ± 0.06 mm 0.010 4.1 x 14.1 x 12.5 0.38 40... (2000) 41... (2000) 57... (1500) 58... (1500) 42... (1500) 43... (1500) 103 0.012 4.5 x 14.5 x 12.5 0.43 40... (2000) 41... (2000) 57... (1500) 58... (1500) 42... (1300) 43... (1300) 123 0.015 4.9 x 14.9 x 12.5 0.49 40... (2000) 41... (2000) 57... (1250) 58... (1250) 42... (1200) 43... (1200) 153 0.018 5.4 x 15.4 x 12.5 0.57 40... (1500) 41... (1500) 57... (1000) 58... (1000) 42... (1100) 43... (1100) 183 0.022 4.8 x 14.8 x 12.5 0.48 40... (2000) 41... (2000) 57... (1250) 58... (1250) 42... (1300) 43... (1300) 223 0.027 5.3 x 15.3 x 12.5 0.55 40... (2000) 41... (2000) 57... (1000) 58... (1000) 42... (1200) 43... (1200) 273 0.033 5.9 x 15.9 x 12.5 0.70 40... (1500) 41... (1500) 57... (1000) 58... (1000) 42... (1100) 43... (1100) 333 Notes • SPQ = Standard Packing Quantity (1) Net weight for short lead product only Revision: 23-Nov-15 Document Number: 28105 6 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MKT467, MKT468, MKT469 www.vishay.com Vishay BCcomponents COMPOSITION OF CATALOG NUMBER: 468 TYPE AND PITCHES 468 MULTIPLIER (nF) CAPACITANCE (numerically) 15.0 mm/7.5 mm 15.0 mm 0.1 22.5 mm 1 3 10 4 100 5 Example: 104 = 10 x 10 = 100 nF 27.5 mm BFC2 2222 (*) 468 468 XX XX YY YY 2 Y Y (*) Old ordering number TYPE PACKAGING LEAD CONFIGURATION Loose in box Lead length 3.5 mm + 1.0 mm/- 0.5 mm (Pitch 10 mm and 15 mm) Lead length 3.5 mm ± 0.5 mm (Pitch 22.5 mm and 27.5 mm) Long leads: 19.0 mm ± 4.0 mm for lead pitch = 15.0 mm 25.0 mm ± 4.0 mm for lead pitch = 22.5 mm 24.0 mm ± 4.0 mm for lead pitch = 27.5 mm 468 C-TOL. Taped on reel (1) (bent back) H = 16.0 mm; P0 = 15.0 mm Reel diameter = 500 mm (2) Taped on reel (1) H = 16.0 mm; P0 = 12.7 mm Reel diameter = 500 mm PREFERRED TYPES 100 V 250 V 400 V 630 V ± 10 % 04 16 28 40 ±5% 05 17 29 41 ± 10 % 51 53 55 57 ±5% 52 54 56 58 ± 10 % 61 63 65 67 ±5% 62 64 66 68 Dimensions of these code numbers stay between brackets ± 10 % 06 18 30 42 ±5% 07 19 31 43 Notes (1) For detailed tape specifications refer to packaging information: www.vishay.com/doc?28139 (2) Small reel diameter = 356 mm is available on request SPECIFIC REFERENCE DATA: 468 DESCRIPTION Tangent of loss angle: C 0.1 μF 0.1 μF < C 0.47 μF 0.47 μF < C 1.0 μF Rated voltage pulse slope (dU/dt)R at Imax. = 12.5 mm Imax. = 17.5 mm Imax. = 26.0 mm Imax. = 30.0 mm R between leads, for C 0.33 μF at 100 V; 1 min at 500 V; 1 min R between leads, for C > 0.33 μF at 100 V; 1 min at 500 V; 1 min R between interconnecting leads and casing, at 100 V; 1 min at 500 V; 1 min Withstanding (DC) voltage (cut off current 10 mA) (1); rise time 1000 V/s Withstanding (DC) voltage between leads and case Maximum application temperature at 1 kHz 75 x 10-4 75 x 10-4 75 x 10-4 100 VDC 30 V/μs 20 V/μs 10 V/μs > 15 000 M VALUE at 10 kHz 120 x 10-4 120 x 10-4 150 x 10-4 250 VDC 400 VDC 120 V/μs 170 V/μs 45 V/μs 65 V/μs 20 V/μs 30 V/μs 15 V/μs 25 V/μs > 30 000 M at 100 kHz 200 x 10-4 225 x 10-4 630 VDC 120 V/μs 90 V/μs 35 V/μs 30 V/μs > 30 000 M > 30 000 M > 5000 s > 10 000 s > 10 000 s > 10 000 s > 30 000 M > 30 000 M > 30 000 M 160 V; 1 min 400 V; 1 min 640 V; 1 min 1008 V; 1 min 200 V; 1 min 500 V; 1 min 800 V; 1 min 1260 V; 1 min > 30 000 M 105 °C Note (1) See “Voltage Proof Test for Metallized Film Capacitors”: www.vishay.com/doc?28169 Revision: 23-Nov-15 Document Number: 28105 7 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MKT467, MKT468, MKT469 www.vishay.com Vishay BCcomponents URDC = 100 V; URAC = 63 V CATALOG NUMBER BFC2 468 XXYYY AND PACKAGING REEL H = 16.0 mm LOOSE IN BOX DIMENSIONS CC MASS ORIGINAL PITCH BENT BACK PITCH wmax. x h (h’)max. x lmax. VALUE (μF) (g) (1) (mm) C-TOL. = C-TOL. = C-TOL. = C-TOL. = C-TOL. = C-TOL. = C-TOL. = C-TOL. = ± 10 % ±5% ± 10 % ±5% ± 10 % ±5% ± 10 % ±5% XX (SPQ) XX (SPQ) XX (SPQ) XX (SPQ) XX (SPQ) XX (SPQ) XX (SPQ) XX (SPQ) ..YYY Pitch = 15.0 mm ± 0.4 mm; dt = 0.80 mm ± 0.08 mm lt = 3.5 mm + 1.0 mm / - 0.5 mm lt = 19.0 mm ± 4.0 mm P = 15 mm P0 = 12.7 mm P = 7.5 mm P0 = 15.0 mm 1.2 5.5 x 14.5 (16.0) x 17.5 0.90 04... (2000) 05... (2000) 51... (1250) 52... (1250) 06... (1100) 07... (1100) 61... (900) 62... (900) 125 1.5 6.0 x 15.0 (16.5) x 17.5 1.00 04... (2000) 05... (2000) 51... (1250) 52... (1250) 06... (1000) 07... (1000) 61... (800) 62... (800) 155 1.8 6.5 x 15.5 (17.0) x 17.5 1.15 04... (1500) 05... (1500) 51... (1000) 52... (1000) 06... (900) 07... (900) 61... (750) 62... (750) 185 2.2 7.0 x 16.0 (17.5) x 17.5 1.25 04... (1250) 05... (1250) 51... (1000) 52... (1000) 06... (800) 07... (800) 61... (700) 62... (700) 225 2.7 8.0 x 17.0 (18.5) x 17.5 1.50 04... (1000) 05... (1000) 51... (1000) 52... (1000) 06... (750) 07... (750) 61... (600) 62... (600) 275 3.3 8.5 x 17.5 (19.0) x 17.5 1.70 04... (1000) 05... (1000) 51... (1000) 52... (1000) 06... (700) 07... (700) 61... (550) 62... (550) 335 Pitch = 22.5 mm ± 0.4 mm; dt = 0.80 mm ± 0.08 mm lt = 3.5 mm ± 0.5 mm lt = 25.0 mm ± 4.0 mm P = 22.5 mm P0 = 12.7 mm P = 7.5 mm P0 = 15.0 mm 3.9 6.5 x 18.5 x 26.0 2.1 04... (1000) 05... (1000) 51... (750) 52... (750) 395 4.7 7.0 x 19.5 x 26.0 2.3 04... (900) 05... (900) 51... (700) 52... (700) 475 5.6 7.5 x 20.0 x 26.0 2.5 04... (750) 05... (750) 51... (600) 52... (600) 565 - - 6.8 8.5 x 21.5 x 26.0 3.2 04... (750) 05... (750) 51... (500) 52... (500) 685 8.2 9.5 x 22.5 x 26.0 3.4 04... (700) 05... (700) 51... (500) 52... (500) 825 10.0 10.5 x 23.5 x 26.0 3.8 04... (500) 05... (500) 51... (400) 52... (400) 106 Notes • SPQ = Standard Packing Quantity (1) Net weight for short lead product only Revision: 23-Nov-15 Document Number: 28105 8 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MKT467, MKT468, MKT469 www.vishay.com Vishay BCcomponents URDC = 250 V; URAC = 160 V CATALOG NUMBER BFC2 468 XXYYY AND PACKAGING REEL H = 16.0 mm LOOSE IN BOX CDIMENSIONS ORIGINAL PITCH BENT BACK PITCH C MASS VALUE wmax. x h (h’)max. x lmax. (μF) (g) (1) C-TOL. = C-TOL. = C-TOL. = C-TOL. = C-TOL. = C-TOL. = C-TOL. = C-TOL. = (mm) ± 10 % ±5% ± 10 % ±5% ± 10 % ±5% ± 10 % ±5% XX (SPQ) XX (SPQ) XX (SPQ) XX (SPQ) XX (SPQ) XX (SPQ) XX (SPQ) XX (SPQ) ..YYY Pitch = 15.0 mm ± 0.4 mm; dt = 0.80 mm ± 0.08 mm lt = 3.5 mm + 1.0 mm/- 0.5 mm lt = 19.0 mm ± 4.0 mm P = 15 mm P0 = 12.7 mm P = 7.5 mm P0 = 15.0 mm 0.27 5.0 x 14.0 (15.5) x 17.5 0.80 16... (2000) 17... (2000) 53... (1250) 54... (1250) 18... (1200) 19... (1200) 63... (1000) 64... (1000) 274 0.33 5.5 x 14.5 (16.0) x 17.5 0.90 16... (2000) 17... (2000) 53... (1250) 54... (1250) 18... (1100) 19... (1100) 63... (900) 64... (900) 334 0.39 6.0 x 15.0 (16.5) x 17.5 1.00 16... (2000) 17... (2000) 53... (1250) 54... (1250) 18... (1000) 19... (1000) 63... (800) 64... (800) 394 0.47 6.5 x 15.5 (17.0) x 17.5 1.15 16... (1500) 17... (1500) 53... (1000) 54... (1000) 18... (900) 19... (900) 63... (750) 64... (750) 474 0.56 7.5 x 16.5 (18.0) x 17.5 1.30 16... (1250) 17... (1250) 53... (1000) 54... (1000) 18... (800) 19... (800) 63... (650) 64... (650) 564 0.68 8.0 x 17.0 (18.5) x 17.5 1.50 16... (1000) 17... (1000) 53... (1000) 54... (1000) 18... (750) 19... (750) 63... (600) 64... (600) 684 0.82 8.5 x 17.5 (19.0) x 17.5 1.70 16... (1000) 17... (1000) 53... (1000) 54... (1000) 18... (700) 19... (700) 63... (550) 64... (550) 824 1.0 8.0 x 20.0 (21.5) x 17.5 2.10 16... (1000) 17... (1000) 53... (900) 54... (900) 18... (750) 19... (750) 63... (600) 64... (600) 105 Pitch = 22.5 mm ± 0.4 mm; dt = 0.80 mm ± 0.08 mm lt = 3.5 mm ± 0.5 mm lt = 25.0 mm ± 4.0 mm P = 22.5 mm P0 = 12.7 mm P = 7.5 mm P0 = 15.0 mm 1.2 7.0 x 19.0 x 26.0 2.3 16... (1000) 17... (1000) 53... (700) 54... (700) 125 1.5 8.0 x 21.0 x 26.0 2.8 16... (750) 17... (750) 53... (500) 54... (500) 155 1.8 9.0 x 22.0 x 26.0 3.3 16... (750) 17... (750) 53... (500) 54... (500) 185 2.2 9.8 x 23.0 x 26.0 3.4 16... (750) 17... (750) 53... (450) 54... (450) 225 - - 2.7 11.0 x 24.0 x 26.0 4.0 16... (500) 17... (500) 53... (400) 54... (400) 3.3 12.5 x 25.5 x 26.0 4.5 16... (500) 17... (500) 53... (300) 54... (300) 335 3.9 13.5 x 26.5 x 26.0 5.5 16... (400) 17... (400) 53... (300) 54... (300) 395 4.7 14.9 x 28.0 x 26.0 6.3 16... (250) 17... (250) 53... (250) 54... (250) 475 275 Pitch = 27.5 mm ± 0.4 mm; dt = 0.80 mm ± 0.08 mm; A = 2.5 mm + 1.4 mm / - 0.5 mm lt = 3.5 mm ± 0.5 mm 5.6 15.0 x 28.0 x 30.0 7.5 16... (300) 17... (300) lt = 24.0 mm ± 4.0 mm 53... (200) 54... (200) P = 27.5 mm P0 = 12.7 mm P = 7.5 mm P0 = 15.0 mm - - 565 Notes • SPQ = Standard Packing Quantity (1) Net weight for short lead product only Revision: 23-Nov-15 Document Number: 28105 9 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MKT467, MKT468, MKT469 www.vishay.com Vishay BCcomponents URDC = 400 V; URAC = 220 V CATALOG NUMBER BFC2 468 XXYYY AND PACKAGING REEL H = 16.0 mm LOOSE IN BOX CDIMENSIONS ORIGINAL PITCH BENT BACK PITCH C MASS VALUE wmax. x h (h’)max. x lmax. (μF) (g) (1) C-TOL. = C-TOL. = C-TOL. = C-TOL. = C-TOL. = C-TOL. = C-TOL. = C-TOL. = (mm) ± 10 % ±5% ± 10 % ±5% ± 10 % ±5% ± 10 % ±5% XX (SPQ) XX (SPQ) XX (SPQ) XX (SPQ) XX (SPQ) XX (SPQ) XX (SPQ) XX (SPQ) ..YYY Pitch = 15.0 mm ± 0.4 mm; dt = 0.80 mm ± 0.08 mm lt = 3.5 mm + 1.0 mm / - 0.5 mm lt = 19.0 mm ± 4.0 mm P = 15 mm P0 = 12.7 mm P = 7.5 mm P0 = 15.0 mm 0.12 5.0 x 14.0 (15.5) x 17.5 0.80 28... (2000) 29... (2000) 55... (1250) 56... (1250) 30... (1200) 31... (1200) 65... (1000) 66... (1000) 124 0.15 5.8 x 15.0 (16.5) x 17.5 0.95 28... (1750) 29... (1750) 55... (1250) 56... (1250) 30... (1100) 31... (1100) 65... (850) 66... (850) 154 0.18 6.5 x 15.5 (17.0) x 17.5 1.15 28... (1500) 29... (1500) 55... (1000) 56... (1000) 30... (900) 31... (900) 65... (750) 66... (750) 184 0.22 7.0 x 16.0 (17.5) x 17.5 1.25 28... (1500) 29... (1500) 55... (1000) 56... (1000) 30... (800) 31... (800) 65... (700) 66... (700) 224 0.27 7.4 x 16.5 (18.0) x 17.5 1.28 28... (1250) 29... (1250) 55... (1250) 56... (1250) 30... (800) 31... (800) 65... (650) 66... (650) 274 0.33 8.5 x 17.5 (19.0) x 17.5 1.70 28... (1000) 29... (1000) 55... (1000) 56... (1000) 30... (700) 31... (700) 65... (550) 66... (550) 334 0.39 7.4 x 19.5 (21.0) x 17.5 2.00 28... (1000) 29... (1000) 55... (1000) 56... (1000) 30... (800) 31... (800) 65... (650) 66... (650) 394 0.47 8.4 x 20.5 (22.0) x 17.5 2.10 28... (750) 29... (750) 55... (850) 56... (850) 30... (700) 31... (700) 65... (550) 66... (550) 474 Pitch = 22.5 mm ± 0.4 mm; dt = 0.80 mm ± 0.08 mm lt = 3.5 mm ± 0.5 mm lt = 25.0 mm ± 4.0 mm P = 22.5 mm P0 = 12.7 mm P = 7.5 mm P0 = 15.0 mm 0.56 7.0 x 19.5 x 26.0 2.5 28... (1000) 29... (1000) 55... (650) 56... (650) 564 0.68 8.0 x 21.0 x 26.0 2.8 28... (750) 29... (750) 55... (500) 56... (500) 684 0.82 9.0 x 22.0 x 26.0 3.3 28... (750) 29... (750) 55... (500) 56... (500) 1.0 9.9 x 23.0 x 26.0 3.5 28... (750) 29... (750) 55... (450) 56... (450) 105 1.2 11.0 x 24.0 x 26.0 4.0 28... (500) 29... (500) 55... (400) 56... (400) 125 - - 824 Pitch = 27.5 mm ± 0.4 mm; dt = 0.80 mm ± 0.08 mm; A = 2.5 mm + 1.4 mm / - 0.5 mm lt = 3.5 mm ± 0.5 mm lt = 24.0 mm ± 4.0 mm 1.5 11.5 x 24.5 x 30.0 5.8 28... (450) 29... (450) 55... (300) 56... (300) 1.8 12.5 x 25.5 x 30.0 6.4 28... (350) 29... (350) 55... (250) 56... (250) 2.2 14.0 x 27.0 x 30.0 7.3 28... (300) 29... (300) 55... (200) 56... (200) P = 27.5 mm P0 = 12.7 mm P = 7.5 mm P0 = 15.0 mm 155 - - 185 225 Notes • SPQ = Standard Packing Quantity (1) Net weight for short lead product only Revision: 23-Nov-15 Document Number: 28105 10 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MKT467, MKT468, MKT469 www.vishay.com Vishay BCcomponents URDC = 630 V; URAC = 250 V CATALOG NUMBER BFC2 468 XXYYY AND PACKAGING REEL H = 16.0 mm LOOSE IN BOX CDIMENSIONS ORIGINAL PITCH BENT BACK PITCH MASS VALUE wmax. x h (h’)max. x lmax. (g) (1) C-TOL. = C-TOL. = C-TOL. = C-TOL. = C-TOL. = C-TOL. = C-TOL. = C-TOL. = (mm) ± 10 % ±5% ± 10 % ±5% ± 10 % ±5% ± 10 % ±5% C (μF) XX (SPQ) XX (SPQ) XX (SPQ) XX (SPQ) XX (SPQ) XX (SPQ) XX (SPQ) XX (SPQ) ..YYY Pitch = 15.0 mm ± 0.4 mm; dt = 0.80 mm ± 0.08 mm lt = 3.5 mm + 1.0 mm/- 0.5 mm lt = 19.0 mm ± 4.0 mm P = 15 mm P0 = 12.7 mm P = 7.5 mm P0 = 15.0 mm 0.039 5.0 x 14.0 (15.5) x 17.5 0.80 40... (2000) 41... (2000) 57... (1250) 58... (1250) 42... (1200) 43... (1200) 67... (1000) 68... (1000) 393 0.047 5.5 x 14.5 (16.0) x 17.5 0.90 40... (2000) 41... (2000) 57... (1250) 58... (1250) 42... (1100) 43... (1100) 67... (900) 68... (900) 473 0.056 5.9 x 15.0 (16.5) x 17.5 0.95 40... (1750) 41... (1750) 57... (1250) 58... (1250) 42... (1000) 43... (1000) 67... (850) 68... (850) 563 0.068 6.5 x 16.0 (17.5) x 17.5 1.15 40... (1500) 41... (1500) 57... (1000) 58... (1000) 42... (800) 43... (800) 67... (750) 68... (750) 683 0.082 7.3 x 16.5 (18.0) x 17.5 1.27 40... (1500) 41... (1500) 57... (1000) 58... (1000) 42... (800) 43... (800) 67... (650) 68... (650) 823 0.10 7.9 x 17.0 (18.5) x 17.5 1.48 40... (1250) 41... (1250) 57... (1000) 58... (1000) 42... (750) 43... (750) 67... (600) 68... (600) 104 0.12 7.5 x 19.5 (21.0) x 17.5 2.00 40... (1250) 41... (1250) 57... (1000) 58... (1000) 42... (800) 43... (800) 67... (650) 68... (650) 124 0.15 8.5 x 20.5 (22.0) x 17.5 2.20 40... (1000) 41... (1000) 57... (850) 58... (850) 42... (700) 43... (700) 67... (550) 68... (550) 154 Pitch = 22.5 mm ± 0.4 mm; dt = 0.80 mm ± 0.08 mm lt = 3.5 mm ± 0.5 mm lt = 25.0 mm ± 4.0 mm P = 22.5 mm P0 = 12.7 mm P = 7.5 mm P0 = 15.0 mm 0.18 7.5 x 19.5 x 26.0 2.5 40... (1000) 41... (1000) 57... (650) 58... (650) 184 0.22 8.0 x 21.0 x 26.0 2.8 40... (750) 41... (750) 57... (500) 58... (500) 224 0.27 9.0 x 22.0 x 26.0 3.3 40... (750) 41... (750) 57... (500) 58... (500) 274 0.33 10.0 x 23.0 x 26.0 3.5 40... (700) 41... (700) 57... (450) 58... (450) 334 - - 0.39 11.5 x 24.0 x 26.0 4.2 40... (600) 41... (600) 57... (400) 58... (400) 0.47 12.5 x 25.5 x 26.0 4.5 40... (500) 41... (500) 57... (300) 58... (300) 474 0.56 13.5 x 26.6 x 26.0 5.5 40... (450) 41... (450) 57... (300) 58... (300) 564 0.68 15.0 x 28.0 x 26.0 6.5 40... (400) 41... (400) 57... (250) 58... (250) 684 394 Pitch = 27.5 mm ± 0.4 mm; dt = 0.80 mm ± 0.08 mm; A = 2.5 mm + 1.4 mm / - 0.5 mm lt = 3.5 mm ± 0.5 mm 0.82 15.0 x 28.0 x 30.0 7.5 40... (300) 41... (300) lt = 24.0 mm ± 4.0 mm 57... (200) 58... (200) P = 27.5 mm P0 = 12.7 mm P = 7.5 mm P0 = 15.0 mm - - - Notes • SPQ = Standard Packing Quantity (1) Net weight for short lead product only Revision: 23-Nov-15 Document Number: 28105 11 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MKT467, MKT468, MKT469 www.vishay.com Vishay BCcomponents COMPOSITION OF CATALOG NUMBER: 469 TYPE AND PITCHES 469 MULTIPLIER (nF) CAPACITANCE (numerically) 10.0 mm 0.1 2 1 3 10 4 100 5 Example: 104 = 10 x 10 = 100 nF BFC2 2222 (*) 469 469 XX XX YY YY Y Y (*) Old ordering number TYPE PACKAGING Loose in box 469 Taped on reel (1) LEAD CONFIGURATION Lead length 4.0 mm + 1.0 mm/- 0.5 mm Lead length 22.0 mm ± 4.0 mm H = 18.5 mm; P0 = 12.7 mm Reel diameter = 500 mm C-TOL. ± 10 % ±5% ± 10 % ±5% ± 10 % ±5% 100 V 25 26 21 22 28 29 PREFERRED TYPES 250 V 400 V 45 55 46 56 41 51 42 52 48 58 49 59 630 V 65 66 61 62 68 69 Note (1) For detailed tape specifications refer to packaging information: www.vishay.com/doc?28139 SPECIFIC REFERENCE DATA: 469 DESCRIPTION Tangent of loss angle: C 0.1 μF 0.1 μF < C 0.47 μF 0.47 μF < C 1.0 μF Rated voltage pulse slope (dU/dt)R at Imax. = 12.5 mm R between leads, for C 0.33 μF at 100 V; 1 min at 500 V; 1 min R between leads, for C > 0.33 μF at 100 V; 1 min at 500 V; 1 min at 1 kHz 75 x 10-4 75 x 10-4 75 x 10-4 100 VDC 30 V/μs > 15 000 M VALUE at 10 kHz 120 x 10-4 120 x 10-4 120 x 10-4 250 VDC 400 VDC 120 V/μs 170 V/μs > 30 000 M at 100 kHz 200 x 10-4 225 x 10-4 630 VDC 120 V/μs > 30 000 M > 30 000 M > 5000 s > 10 000 s > 10 000 s > 10 000 s R between interconnecting leads and casing, at 100 V; 1 min > 30 000 M > 30 000 M > 30 000 M at 500 V; 1 min Withstanding (DC) voltage (cut off current 10 mA) (1); rise time 1000 V/s Withstanding (DC) voltage between leads and case Maximum application temperature > 30 000 M 160 V; 1 min 400 V; 1 min 200 V; 1 min 500 V; 1 min 640 V; 1 min 1008 V; 1 min 840 V; 1 min 1260 V; 1 min 105 °C Note (1) See “Voltage Proof Test for Metallized Film Capacitors”: www.vishay.com/doc?28169 Revision: 23-Nov-15 Document Number: 28105 12 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MKT467, MKT468, MKT469 www.vishay.com Vishay BCcomponents URDC = 100 V; URAC = 63 V CATALOG NUMBER BFC2 469 XXYYY AND PACKAGING LOOSE IN BOX C (μF) DIMENSIONS wmax. x hmax. x lmax. (mm) MASS (g) (1) lt = 4.0 mm + 1.0 mm / - 0.5 mm REEL lt = 22.0 mm ± 4.0 mm H = 18.5 mm; P0 = 12.7 mm C-TOL. = ± 10 % C-TOL. = ±5% C-TOL. = ± 10 % C-TOL. = ±5% C-TOL. = ± 10 % C-TOL. = ±5% XX (SPQ) XX (SPQ) XX (SPQ) XX (SPQ) XX (SPQ) XX (SPQ) C-VALUE ..YYY Pitch = 10.0 mm ± 0.4 mm; dt = 0.60 mm ± 0.06 mm 0.056 563 0.068 4.0 x 11.0 x 12.5 0.35 0.082 25... (2000) 26... (2000) 21... (1500) 22... (1500) 28... (1500) 29... (1500) 0.10 683 823 104 0.12 4.3 x 11.3 x 12.5 0.38 25... (2000) 26... (2000) 21... (1500) 22... (1500) 28... (1500) 29... (1500) 124 0.15 3.9 x 10.9 x 12.5 0.34 25... (2000) 26... (2000) 21... (1500) 22... (1500) 28... (1500) 29... (1500) 154 0.18 4.2 x 11.2 x 12.5 0.37 25... (2000) 26... (2000) 21... (1500) 22... (1500) 28... (1500) 29... (1500) 184 0.22 4.5 x 11.5 x 12.5 0.40 25... (2000) 26... (2000) 21... (1500) 22... (1500) 28... (1300) 29... (1300) 224 0.27 4.2 x 11.2 x 12.5 0.37 25... (2000) 26... (2000) 21... (1500) 22... (1500) 28... (1500) 29... (1500) 274 0.33 4.6 x 11.6 x 12.5 0.41 25... (2000) 26... (2000) 21... (1500) 22... (1500) 28... (1300) 29... (1300) 334 0.39 4.0 x 11.0 x 12.5 0.35 25... (2000) 26... (2000) 21... (1500) 22... (1500) 28... (1500) 29... (1500) 394 0.47 4.2 x 11.2 x 12.5 0.37 25... (2000) 26... (2000) 21... (1500) 22... (1500) 28... (1500) 29... (1500) 474 0.56 4.6 x 11.6 x 12.5 0.41 25... (2000) 26... (2000) 21... (1500) 22... (1500) 28... (1300) 29... (1300) 564 0.68 5.0 x 12.0 x 12.5 0.44 25... (1500) 26... (1500) 21... (1250) 22... (1250) 28... (1200) 29... (1200) 684 0.82 5.5 x 12.5 x 12.5 0.47 25... (1500) 26... (1500) 21... (1000) 22... (1000) 28... (1100) 29... (1100) 824 1.0 6.0 x 13.0 x 12.5 0.55 25... (1250) 26... (1250) 21... (1000) 22... (1000) 28... (1000) 29... (1000) 105 Notes • SPQ = Standard Packing Quantity (1) Net weight for short lead product only Revision: 23-Nov-15 Document Number: 28105 13 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MKT467, MKT468, MKT469 www.vishay.com Vishay BCcomponents URDC = 250 V; URAC = 160 V CATALOG NUMBER BFC2 469 XXYYY AND PACKAGING LOOSE IN BOX C (μF) DIMENSIONS wmax. x hmax. x lmax. (mm) MASS (g) (1) lt = 4.0 mm + 1.0 mm / - 0.5 mm REEL lt = 22.0 mm ± 4.0 mm H = 18.5 mm; P0 = 12.7 mm C-VALUE C-TOL. = ± 10 % C-TOL. = ±5% C-TOL. = ± 10 % C-TOL. = ±5% C-TOL. = ± 10 % C-TOL. = ±5% XX (SPQ) XX (SPQ) XX (SPQ) XX (SPQ) XX (SPQ) XX (SPQ) ..YYY Pitch = 10.0 mm ± 0.4 mm; dt = 0.60 mm ± 0.06 mm 0.027 4.2 x 11.2 x 12.5 0.37 45... (2000) 46... (2000) 41... (1500) 42... (1500) 48... (1500) 49... (1500) 273 0.033 4.6 x 11.6 x 12.5 0.41 45... (2000) 46... (2000) 41... (1500) 42... (1500) 48... (1300) 49... (1300) 333 0.039 4.0 x 11.0 x 12.5 0.35 45... (2000) 46... (2000) 41... (1500) 42... (1500) 48... (1500) 49... (1500) 393 0.047 4.1 x 11.1 x 12.5 0.36 45... (2000) 46... (2000) 41... (1500) 42... (1500) 48... (1500) 49... (1500) 473 0.056 4.0 x 11.0 x 12.5 0.35 45... (2000) 46... (2000) 41... (1500) 42... (1500) 48... (1500) 49... (1500) 563 0.068 4.1 x 11.1 x 12.5 0.36 45... (2000) 46... (2000) 41... (1500) 42... (1500) 48... (1500) 49... (1500) 683 0.082 4.4 x 11.4 x 12.5 0.39 45... (2000) 46... (2000) 41... (1500) 42... (1500) 48... (1500) 49... (1500) 823 0.10 4.0 x 11.0 x 12.5 0.35 45... (2000) 46... (2000) 41... (1500) 42... (1500) 48... (1500) 49... (1500) 104 0.12 4.3 x 11.3 x 12.5 0.38 45... (2000) 46... (2000) 41... (1500) 42... (1500) 48... (1500) 49... (1500) 124 0.15 4.8 x 11.8 x 12.5 0.42 45... (2000) 46... (2000) 41... (1250) 42... (1250) 48... (1300) 49... (1300) 154 0.18 5.2 x 12.2 x 12.5 0.45 45... (1500) 46... (1500) 41... (1000) 42... (1000) 48... (1200) 49... (1200) 184 0.22 5.8 x 12.8 x 12.5 0.50 45... (1500) 46... (1500) 41... (1000) 42... (1000) 48... (1100) 49... (1100) 224 Notes • SPQ = Standard Packing Quantity (1) Net weight for short lead product only Revision: 23-Nov-15 Document Number: 28105 14 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MKT467, MKT468, MKT469 www.vishay.com Vishay BCcomponents URDC = 400 V; URAC = 220 V CATALOG NUMBER BFC2 469 XXYYY AND PACKAGING LOOSE IN BOX REEL H = 18.5 mm; lt = 4.0 mm lt = 22.0 mm ± 4.0 mm DIMENSIONS + 1.0 mm / - 0.5 mm P0 = 12.7 mm C MASS wmax. x hmax. x lmax. (1) (μF) (g) C-TOL. = C-TOL. = C-TOL. = C-TOL. = C-TOL. = C-TOL. = (mm) ± 10 % ±5% ± 10 % ±5% ± 10 % ±5% XX XX XX XX XX XX (SPQ) (SPQ) (SPQ) (SPQ) (SPQ) (SPQ) Pitch = 10.0 mm ± 0.4 mm; dt = 0.60 mm ± 0.06 mm 0.0010 0.0012 55... 56... 51... 52... 58... 59... 4.5 x 11.5 x 12.5 0.40 (2000) (2000) (1500) (1500) (1300) (1300) 0.0015 0.0018 55... 56... 51... 52... 58... 59... 0.0022 4.0 x 11.0 x 12.5 0.35 (2000) (2000) (1500) (1500) (1500) (1500) 55... 56... 51... 52... 58... 59... 0.0027 4.3 x 11.3 x 12.5 0.38 (2000) (2000) (1500) (1500) (1500) (1500) 55... 56... 51... 52... 58... 59... 0.0033 4.6 x 11.6 x 12.5 0.41 (2000) (2000) (1500) (1500) (1300) (1300) 55... 56... 51... 52... 58... 59... 0.0039 4.0 x 11.0 x 12.5 0.35 (2000) (2000) (1500) (1500) (1500) (1500) 55... 56... 51... 52... 58... 59... 0.0047 4.1 x 11.1 x 12.5 0.36 (2000) (2000) (1500) (1500) (1500) (1500) 55... 56... 51... 52... 58... 59... 0.0056 4.6 x 11.6 x 12.5 0.41 (2000) (2000) (1500) (1500) (1300) (1300) 55... 56... 51... 52... 58... 59... 0.0068 4.2 x 11.2 x 12.5 0.37 (2000) (2000) (1500) (1500) (1500) (1500) 55... 56... 51... 52... 58... 59... 0.0082 4.6 x 11.6 x 12.5 0.41 (2000) (2000) (1500) (1500) (1300) (1300) 55... 56... 51... 52... 58... 59... 0.010 4.1 x 11.1 x 12.5 0.36 (2000) (2000) (1500) (1500) (1500) (1500) 55... 56... 51... 52... 58... 59... 0.012 4.5 x 11.5 x 12.5 0.40 (2000) (2000) (1500) (1500) (1300) (1300) 55... 56... 51... 52... 58... 59... 0.015 4.1 x 11.1 x 12.5 0.36 (2000) (2000) (1500) (1500) (1500) (1500) 55... 56... 51... 52... 58... 59... 0.018 4.5 x 11.5 x 12.5 0.40 (2000) (2000) (1500) (1500) (1300) (1300) 55... 56... 51... 52... 58... 59... 0.022 4.0 x 11.0 x 12.5 0.35 (2000) (2000) (1500) (1500) (1500) (1500) 55... 56... 51... 52... 58... 59... 0.027 4.2 x 11.2 x 12.5 0.37 (2000) (2000) (1500) (1500) (1500) (1500) 55... 56... 51... 52... 58... 59... 0.033 4.6 x 11.6 x 12.5 0.41 (2000) (2000) (1500) (1500) (1300) (1300) 55... 56... 51... 52... 58... 59... 0.039 5.0 x 12.0 x 12.5 0.44 (1500) (1500) (1250) (1250) (1200) (1200) 55... 56... 51... 52... 58... 59... 0.047 4.1 x 11.1 x 12.5 0.36 (2000) (2000) (1500) (1500) (1500) (1500) 55... 56... 51... 52... 58... 59... 0.056 4.4 x 11.4 x 12.5 0.39 (2000) (2000) (1500) (1500) (1500) (1500) 55... 56... 51... 52... 58... 59... 0.068 4.8 x 11.8 x 12.5 0.42 (2000) (2000) (1250) (1250) (1300) (1300) 55... 56... 51... 52... 58... 59... 0.082 5.4 x 12.4 x 12.5 0.46 (1500) (1500) (1000) (1000) (1200) (1200) 55... 56... 51... 52... 58... 59... 0.10 5.7 x 12.7 x 12.5 0.48 (1500) (1500) (1000) (1000) (1100) (1100) C-VALUE ..YYY 102 122 152 182 222 272 332 392 472 562 682 822 103 123 153 183 223 273 333 393 473 563 683 823 104 Notes • SPQ = Standard Packing Quantity (1) Net weight for short lead product only Revision: 23-Nov-15 Document Number: 28105 15 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MKT467, MKT468, MKT469 www.vishay.com Vishay BCcomponents URDC = 630 V; URAC = 250 V CATALOG NUMBER BFC2 469 XXYYY AND PACKAGING LOOSE IN BOX C (μF) DIMENSIONS wmax. x hmax. x lmax. (mm) MASS (g) (1) lt = 4.0 mm + 1.0 mm / - 0.5 mm REEL H = 18.5 mm; P0 = 12.7 mm lt = 22.0 mm ± 4.0 mm C-VALUE C-TOL. = ± 10 % C-TOL. = ±5% C-TOL. = ± 10 % C-TOL. = ±5% C-TOL. = ± 10 % C-TOL. = ±5% XX (SPQ) XX (SPQ) XX (SPQ) XX (SPQ) XX (SPQ) XX (SPQ) ..YYY Pitch = 10.0 mm ± 0.4 mm; dt = 0.60 mm ± 0.06 mm 0.010 4.1 x 11.1 x 12.5 0.36 65... (2000) 66... (2000) 61... (1500) 62... (1500) 68... (1500) 69... (1500) 103 0.012 4.5 x 11.5 x 12.5 0.40 65... (2000) 66... (2000) 61... (1500) 62... (1500) 68... (1300) 69... (1300) 123 0.015 4.9 x 11.9 x 12.5 0.43 65... (2000) 66... (2000) 61... (1250) 62... (1250) 68... (1200) 69... (1200) 153 0.018 5.4 x 12.4 x 12.5 0.46 65... (1500) 66... (1500) 61... (1000) 62... (1000) 68... (1100) 69... (1100) 183 0.022 4.8 x 11.8 x 12.5 0.42 65... (2000) 66... (2000) 61... (1250) 62... (1250) 68... (1300) 69... (1300) 223 0.027 5.3 x 12.3 x 12.5 0.46 65... (2000) 66... (2000) 61... (1000) 62... (1000) 68... (1200) 69... (1200) 273 0.033 5.9 x 12.9 x 12.5 0.52 65... (1500) 66... (1500) 61... (1000) 62... (1000) 68... (1100) 69... (1100) 333 Notes • SPQ = Standard Packing Quantity (1) Net weight for short lead product only MOUNTING Normal Use The capacitors are designed for mounting on printed-circuit boards. The capacitors packed in bandoliers are designed for mounting in printed-circuit boards by means of automatic insertion machines. For detailed tape specifications refer to packaging information: www.vishay.com/doc?28139 Specific Method of Mounting to Withstand Vibration and Shock In order to withstand vibration and shock tests, it must be ensured that the underside and the kinks are in good contact with the printed-circuit board. • For pitches 15 mm capacitors shall be mechanically fixed by the leads • For larger pitches the capacitors shall be mounted in the same way and the body clamped Storage Temperature Tstg = -25 °C to +35 °C with RH maximum 75 % without condensation SOLDERING For general soldering conditions and wave soldering profile, we refer to the application note: “Soldering Guidelines for Film Capacitors”: www.vishay.com/doc?28171 Ratings and Characteristics Reference Conditions Unless otherwise specified, all electrical values apply to an ambient free air temperature of 23 °C ± 1 °C, an atmospheric pressure of 86 kPa to 106 kPa and a relative humidity of 50 % ± 2 %. For reference testing, a conditioning period shall be applied over 96 h ± 4 h by heating the products in a circulating air oven at the rated temperature and a relative humidity not exceeding 20 %. Revision: 23-Nov-15 Document Number: 28105 16 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MKT467, MKT468, MKT469 www.vishay.com Vishay BCcomponents CHARACTERISTICS 6 1 kHz, 1 V ΔC/C (%) ΔC/C (%) 2 4 1 2 0 max. 400 V - 630 V - 1000 V 0 typical -1 250 V -2 100 V -2 -4 -3 -6 -60 min. 102 103 104 f (Hz) 105 60 Tamb (°C) 100 102 103 Impedance (Ω) Impedance (Ω) 20 Capacitance as a function of ambient temperature (typical curve) Capacitance as a function of frequency (typical curve) 10 -20 2 10 63 40 1 63 101 0V ;1 25 F 00 10 0V ;1 100 .0 10 0n 0V ;1 100 0V ;1 0V ;1 0V ;1 0µ .0 50 nF µF F nF 10-1 µF 10-1 10-2 10-2 104 10-3 105 106 107 f (Hz) 104 108 105 106 107 f (Hz) 108 468 - Impedance as a function of frequency (typical curve) 467, 469 - Impedance as a function of frequency (typical curve) Factor 1.2 1.0 0.8 0.6 0.4 0.2 0.0 -60 -20 20 60 Tamb (°C) 100 Max. DC and AC voltage as a function of temperature Revision: 23-Nov-15 Document Number: 28105 17 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MKT467, MKT468, MKT469 www.vishay.com Vishay BCcomponents 102 AC Voltage (V) AC Voltage (V) 102 nF F 56 0 n µF 22 .0 1 22 101 56 101 nF nF 0 1. 0 µF 85 °C < Tamb ≤ 105 °C, 100 VDC Tamb ≤ 85 °C, 100 VDC 100 101 102 103 104 f (Hz) 105 100 101 102 103 103 103 AC Voltage (V) AC Voltage (V) 102 102 27 2282 n nF 0 F nF Tamb ≤ 85 °C, 250 VDC 102 103 104 105 f (Hz) 106 105 2 8 7 22 2 n nF 0 F nF 101 100 101 f (Hz) 467, 469 - Max. RMS voltage as a function of frequency 467, 469 - Max. RMS voltage as a function of frequency 101 104 100 101 85 °C < Tamb ≤ 105 °C, 250 VDC 102 103 104 105 f (Hz) 106 467, 469 - Max. RMS voltage as a function of frequency 103 103 AC Voltage (V) AC Voltage (V) 467, 469 - Max. RMS voltage as a function of frequency 102 102 1 5 0 10 6 n nF 0 F nF 1 2 .2 10 .2 µ µF µF F 101 101 Tamb ≤ 85 °C, 100 VDC 100 101 102 103 104 105 f (Hz) 106 467, 469 - Max. RMS voltage as a function of frequency Revision: 23-Nov-15 100 101 85 °C < Tamb ≤ 105 °C, 400 VDC 102 103 104 105 f (Hz) 106 467, 469 - Max. RMS voltage as a function of frequency Document Number: 28105 18 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MKT467, MKT468, MKT469 www.vishay.com Vishay BCcomponents 103 AC Voltage (V) AC Voltage (V) 103 102 102 1 33 0 n nF F 1 33 0 n nF F 101 101 Tamb ≤ 85 °C, 630 VDC 100 101 102 85 °C < Tamb ≤ 105 °C, 630 VDC 103 104 105 f (Hz) 106 100 101 102 103 104 105 f (Hz) 106 467, 469 - Max. RMS voltage as a function of frequency 467, 469 - Max. RMS voltage as a function of frequency 102 AC Voltage (V) AC Voltage (V) 102 101 85 °C < Tamb ≤ 105 °C, 100 VDC Tamb ≤ 85 °C, 100 VDC 100 102 103 µF 2 F 1. .2 µµF 2 0 1 1 2 .2 10 .2 µ ¸µF µF F 101 104 105 f (Hz) 106 100 101 102 103 104 f (Hz) 105 468 - Max. RMS voltage as a function of frequency 468 - Max. RMS voltage as a function of frequency 103 AC Voltage (V) AC Voltage (V) 103 102 102 2 2 70 5. .2 µ nF 6 F µF 101 101 27 2 0 5. .2 µ nF 6 F µF Tamb ≤ 85 °C, 250 VDC 100 101 85 °C < Tamb ≤ 105 °C, 250 VDC 100 102 103 104 105 f (Hz) 106 468 - Max. RMS voltage as a function of frequency Revision: 23-Nov-15 101 102 103 104 105 f (Hz) 106 468 - Max. RMS voltage as a function of frequency Document Number: 28105 19 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MKT467, MKT468, MKT469 www.vishay.com Vishay BCcomponents AC Voltage (V) 103 AC Voltage (V) 103 102 102 12 4 0n 2. 70 n F 2 F µF 101 12 4 0 2. 70 n nF 2 F µF 101 Tamb ≤ 85 °C, 400 VDC 85 °C < Tamb ≤ 105 °C, 400 VDC 100 100 101 102 103 104 105 f (Hz) 106 101 103 104 105 f (Hz) 106 468 - Max. RMS voltage as a function of frequency 468 - Max. RMS voltage as a function of frequency AC Voltage (V) 103 AC Voltage (V) 103 102 39 1 n 8200 n F 0 F nF 102 102 3 1 9n 82 00 n F 0 F nF 101 101 Tamb ≤ 85 °C, 630 VDC 85 °C < Tamb ≤ 105 °C, 630 VDC 100 101 102 103 104 105 f (Hz) 106 100 101 103 104 105 f (Hz) 106 468 - Max. RMS voltage as a function of frequency 468 - Max. RMS voltage as a function of frequency AC Voltage (V) 103 AC Voltage (V) 103 102 1 15 2200 nF 0 nF nF 102 102 101 1 15 2200 nF 0 nF nF 101 85 °C < Tamb ≤ 105 °C, 1000 VDC Tamb ≤ 85 °C, 1000 VDC 100 101 100 102 103 104 105 f (Hz) 106 468 - Max. RMS voltage as a function of frequency Revision: 23-Nov-15 101 102 103 104 105 f (Hz) 106 468 - Max. RMS voltage as a function of frequency Document Number: 28105 20 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MKT467, MKT468, MKT469 www.vishay.com Vishay BCcomponents 105 RC (s) Dissipation factor (x 10-4) 103 5 4 3 2 1 104 102 103 Curve 1: C = 0.33 µF Curve 2: 0.33 µF, C = 1.2 µF Curve 3: 1.2 µF, C = 3.9 µF Curve 4: 3.9 µF, C = 6.8 µF Curve 5: C = 6.8 µF 101 10 102 2 3 10 10 4 f (Hz) 10 5 -50 Tangent of loss angle as a function of frequency (typical curve) 0 50 Tamb (°C) 100 Insulation resistance as a function of the ambient temperature (typical curve) ΔT (°C) 16 12 8 4 0 -60 -20 20 60 T 100 amb (°C) Maximum allowed component temperature rise (T) as a function of the ambient temperature (Tamb) HEAT CONDUCTIVITY (G) AS A FUNCTION OF (ORIGINAL) PITCH AND CAPACITOR BODY THICKNESS IN mW/°C Wmax. (mm) 4.0 4.5 5.0 5.5 6.0 6.5 7.0 7.5 8.0 8.5 9.0 9.5 10.0 10.5 11.0 11.5 Revision: 23-Nov-15 PITCH 10 mm 4.0 4.5 5.0 6.0 6.0 6.5 - HEAT CONDUCTIVITY (mW/°C) PITCH 15.5 mm PITCH 22.5 mm 5.0 6.0 6.0 12.0 6.5 13.0 6.5 13.0 8.0 15.0 8.0 15.0 9.0 17.0 9.0 17.0 11.0 18.0 11.0 18.0 12.0 20.0 12.0 20.0 22.0 - PITCH 27.5 mm 13.0 15.0 15.0 17.0 17.0 18.0 20.0 20.0 22.0 22.0 23.0 25.0 25.0 27.0 Document Number: 28105 21 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MKT467, MKT468, MKT469 www.vishay.com Vishay BCcomponents HEAT CONDUCTIVITY (mW/°C) PITCH 15.5 mm PITCH 22.5 mm Wmax. (mm) PITCH 10 mm 12.0 - - - 27.0 12.5 - - - 30.0 13.0 - - - 30.0 13.5 - - - 30.0 14.0 - - - 30.0 14.5 - - - 33.0 15.0 - - - 33.0 15.5 - - - 37.0 16.0 - - - 37.0 PITCH 27.5 mm POWER DISSIPATION AND MAXIMUM COMPONENT TEMPERATURE RISE The power dissipation must be limited in order not to exceed the maximum allowed component temperature rise as a function of the free ambient temperature. The power dissipation can be calculated according type detail specification “HQN-384-01/101: Technical Information Film Capacitors”. The component temperature rise (T) can be measured (see section “Measuring the component temperature” for more details) or calculated by T = P/G: • T = component temperature rise (°C) • P = power dissipation of the component (mW) • G = heat conductivity of the component (mW/°C) MEASURING THE COMPONENT TEMPERATURE A thermocouple must be attached to the capacitor body as in: Thermocouple The temperature is measured in unloaded (Tamb) and maximum loaded condition (TC). The temperature rise is given by T = TC - Tamb. To avoid radiation or convection, the capacitor should be tested in a wind-free box. APPLICATION NOTE AND LIMITING CONDITIONS These capacitors are not suitable for mains applications as across-the-line capacitors without additional protection, as described hereunder. These mains applications are strictly regulated in safety standards and therefore electromagnetic interference suppression capacitors conforming the standards must be used. For capacitors connected in parallel, normally the proof voltage and possibly the rated voltage must be reduced. For information depending of the capacitance value and the number of parallel connections contact: [email protected] To select the capacitor for a certain application, the following conditions must be checked: 1. The peak voltage (UP) shall not be greater than the rated DC voltage (URDC) 2. The peak-to-peak voltage (UP-P) shall not be greater than 22 x URAC to avoid the ionization inception level Revision: 23-Nov-15 Document Number: 28105 22 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MKT467, MKT468, MKT469 www.vishay.com Vishay BCcomponents 3. The voltage pulse slope (dU/dt) shall not exceed the rated voltage pulse slope in an RC-circuit at rated voltage and without ringing. If the pulse voltage is lower than the rated DC voltage, the rated voltage pulse slope may be multiplied by URDC and divided by the applied voltage. For all other pulses following equation must be fulfilled: T dU 2 dU 2 x ------- x dt U RDC x ------- dt dt rated 0 T is the pulse duration. The rated voltage pulse slope is valid for ambient temperatures up to 85 °C. For higher temperatures a derating factor of 3 % per K shall be applied. 4. The maximum component surface temperature rise must be lower than the limits (see graph “Max. allowed component temperature rise”). 5. Since in circuits used at voltages over 280 V peak-to-peak the risk for an intrinsically active flammability after a capacitor breakdown (short circuit) increases, it is recommended that the power to the component is limited to 100 times the values mentioned in the table: “Heat Conductivity” 6. When using these capacitors as across-the-line capacitor in the input filter for mains applications or as series connected with an impedance to the mains the applicant must guarantee that the following conditions are fulfilled in any case (spikes and surge voltages from the mains included). VOLTAGE CONDITIONS FOR 6 ABOVE ALLOWED VOLTAGES Tamb 85 °C 85 °C < Tamb 105 °C URAC 0.8 x URAC Maximum continuous RMS voltage Maximum temperature RMS-overvoltage (< 24 h) 1.25 x URAC URAC Maximum peak voltage (VO-P) (< 2 s) 1.6 x URAC 1.3 x URAC Example C = 330 nF - 100 V used for the voltage signal shown in next drawing. UP-P = 80 V; UP = 70 V; T1 = 0.5 ms; T2 = 1 ms The ambient temperature is 35 °C Checking conditions: 1. The peak voltage UP = 70 V is lower than 100 VDC 2. The peak-to-peak voltage 80 V is lower than 22 x 63 VAC = 178 UP-P 3. The voltage pulse slope (dU/dt) = 80 V/500 μs = 0.16 V/μs This is lower than 20 V/μs (see specific reference data for each version) 4. The dissipated power is 60 mW as calculated with fourier terms The temperature rise for Wmax. = 8.5 mm and pitch = 15 mm will be 60 mW/11 mW/°C = 5.5 °C This is lower than 15 °C temperature rise at 35 °C, according figure “Max. allowed component temperature rise” 5. Not applicable 6. Not applicable Voltage Signal Voltage UP UP-P Time T1 T2 Revision: 23-Nov-15 Document Number: 28105 23 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MKT467, MKT468, MKT469 www.vishay.com Vishay BCcomponents INSPECTION REQUIREMENTS General Notes Sub-clause numbers of tests and performance requirements refer to the “Sectional Specification, Publication IEC 60384-2 and Specific Reference Data”. Group C Inspection Requirements SUB-CLAUSE NUMBER AND TEST CONDITIONS PERFORMANCE REQUIREMENTS SUB-GROUP C1A PART OF SAMPLE OF SUB-GROUP C1 4.1 Dimensions (detail) As specified in chapters “General Data” of this specification 4.3.1 Initial measurements Capacitance Tangent of loss angle: for C 470 nF at 100 kHz or for C > 470 nF at 10 kHz 4.3 Robustness of terminations Tensile: load 10 N; 10 s Bending: load 5 N; 4 x 90° 4.4 Resistance to soldering heat Method: 1A Solder bath: 280 °C ± 5 °C Duration: 10 s No visible damage 4.14 Component solvent resistance Isopropylalcohol at room temperature Method: 2 Immersion time: 5 min ± 0.5 min Recovery time: min. 1 h, max. 2 h 4.4.2 Final measurements Visual examination No visible damage Legible marking Capacitance |C/C| 2 % of the value measured initially Tangent of loss angle Increase of tan 0.005 for: C 100 nF or 0.010 for: 100 nF < C 220 nF or 0.015 for: 220 nF < C 470 nF and 0.003 for: C > 470 nF Compared to values measured in 4.3.1 4.6.1 Initial measurements Capacitance Tangent of loss angle: for C 470 nF at 100 kHz or for C > 470 nF at 10 kHz No visible damage 4.6 Rapid change of temperature A = -55 °C B = +100 °C 5 cycles Duration t = 30 min 4.7 Vibration Visual examination Mounting: see section “Mounting” of this specification Procedure B4 Frequency range: 10 Hz to 55 Hz Amplitude: 0.75 mm or Acceleration 98 m/s2 (whichever is less severe) Total duration 6 h No visible damage Visual examination No visible damage SUB-GROUP C1B PART OF SAMPLE OF SUB-GROUP C1 4.7.2 Final inspection Revision: 23-Nov-15 Document Number: 28105 24 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MKT467, MKT468, MKT469 www.vishay.com Vishay BCcomponents SUB-CLAUSE NUMBER AND TEST CONDITIONS 4.9 Shock Mounting: see section “Mounting” of this specification Pulse shape: half sine Acceleration: 490 m/s2 Duration of pulse: 11 ms PERFORMANCE REQUIREMENTS 4.9.3 Final measurements Visual examination No visible damage Capacitance |C/C| 3 % of the value measured in 4.6.1 Tangent of loss angle Increase of tan 0.005 for: C 100 nF or 0.010 for: 100 nF < C 220 nF or 0.015 for: 220 nF < C 470 nF and 0.003 for: C > 470 nF Compared to values measured in 4.6.1 Insulation resistance As specified in section “Insulation Resistance” of this specification SUB-GROUP C1 COMBINED SAMPLE OF SPECIMENS OF SUB-GROUPS C1A AND C1B 4.10 Climatic sequence 4.10.2 Dry heat 4.10.3 Damp heat cyclic Test Db, first cycle 4.10.4 Cold 4.10.6 Damp heat cyclic Test Db, remaining cycles 4.10.6.2 Final measurements Revision: 23-Nov-15 Temperature: +105 °C Duration: 16 h Temperature: -55 °C Duration: 2 h Voltage proof = URDC for 1 min within 15 min after removal from test chamber No breakdown or flash-over Visual examination No visible damage Legible marking Capacitance |C/C| 5 % of the value measured in 4.4.2 or 4.9.3 Tangent of loss angle Increase of tan 0.007 for: C 100 nF or 0.010 for: 100 nF < C 220 nF or 0.015 for: 220 nF < C 470 nF and 0.005 for: C > 470 nF Compared to values measured in 4.3.1 or 4.6.1 Insulation resistance 50 % of values specified in section “Insulation Resistance” of this specification Document Number: 28105 25 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MKT467, MKT468, MKT469 www.vishay.com SUB-CLAUSE NUMBER AND TEST SUB-GROUP C2 4.11 Damp heat steady state Vishay BCcomponents CONDITIONS PERFORMANCE REQUIREMENTS 56 days, 40 °C, 90 % to 95 % RH 4.11.1 Initial measurements Capacitance Tangent of loss angle at 1 kHz 4.11.3 Final measurements Voltage proof = URDC for 1 min within 15 min after removal from test chamber No breakdown or flash-over Visual examination No visible damage Legible marking Capacitance |C/C| 5 % of the value measured in 4.11.1. Tangent of loss angle Increase of tan 0.005 Compared to values measured in 4.11.1 Insulation resistance 50 % of values specified in section “Insulation Resistance” of this specification SUB-GROUP C3 4.12 Endurance Duration: 2000 h 1.25 x URDC at 85 °C 1.0 x URDC at 105 °C 4.12.1 Initial measurements Capacitance Tangent of loss angle: for C 470 nF at 100 kHz or for C > 470 nF at 10 kHz 4.12.5 Final measurements Visual examination No visible damage Legible marking Capacitance |C/C| 5 % compared to values measured in 4.12.1 Tangent of loss angle Increase of tan 0.005 for: C 100 nF or 0.010 for: 100 nF < C 220 nF or 0.015 for: 220 nF < C 470 nF and 0.003 for: C > 470 nF Compared to values measured in 4.12.1 Insulation resistance 50 % of values specified in section “Insulation Resistance” of this specification SUB-GROUP C4 4.13 Charge and discharge 10 000 cycles Charged to URDC Discharge resistance: UR R = ------------------------------------------------ C 2.5 dU/dt R 4.13.1 Initial measurements Capacitance Tangent of loss angle: for C 470 nF at 100 kHz or for C > 470 nF at 10 kHz 4.13.3 Final measurements Capacitance |C/C| 3 % compared to values measured in 4.13.1 Tangent of loss angle Increase of tan 0.005 for: C 100 nF or 0.010 for: 100 nF < C 220 nF or 0.015 for: 220 nF < C 470 nF and 0.003 for: C > 470 nF Compared to values measured in 4.13.1 Insulation resistance 50 % of values specified in section “Insulation Resistance” of this specification Revision: 23-Nov-15 Document Number: 28105 26 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000