Datasheet

AON6362
30V N-Channel MOSFET
General Description
Product Summary
VDS
• Trench Power αMOS Technology
• Low RDS(ON)
• Low Gate Charge
• High Current Capability
• RoHS and Halogen-Free Compliant
Applications
ID (at VGS=10V)
30V
60A
RDS(ON) (at VGS=10V)
< 5.2mΩ
RDS(ON) (at VGS=4.5V)
< 8.6mΩ
100% UIS Tested
100% Rg Tested
• DC/DC Converters in Computing
• Isolated DC/DC Converters in Telecom and Industrial
DFN5X6
Top View
D
Top View
Bottom View
1
8
2
7
3
6
4
5
G
PIN1
PIN1
S
Orderable Part Number
Package Type
Form
Minimum Order Quantity
AON6362
DFN 5x6
Tape & Reel
3000
Absolute Maximum Ratings TA=25°C unless otherwise noted
Parameter
Drain-Source Voltage
Symbol
VDS
Gate-Source Voltage
VGS
TC=25°C
Continuous Drain
Current
Pulsed Drain Current
Avalanche Current
C
Avalanche energy
L=0.01mH
VDS Spike
Power Dissipation B
C
10µs
TC=25°C
TA=25°C
Power Dissipation A
Junction and Storage Temperature Range
Thermal Characteristics
Parameter
Maximum Junction-to-Ambient A
Maximum Junction-to-Ambient A D
Maximum Junction-to-Case
Rev. 1.0: October 2014
IAS
38
A
EAS
7
mJ
VSPIKE
36
V
31
Steady-State
Steady-State
W
13
6.2
RθJA
RθJC
W
4
TJ, TSTG
Symbol
t ≤ 10s
A
22
PDSM
TA=70°C
A
27
PD
TC=100°C
V
100
IDSM
TA=70°C
±20
39
IDM
TA=25°C
Continuous Drain
Current
Units
V
60
ID
TC=100°C
C
Maximum
30
-55 to 150
Typ
15
40
3.1
www.aosmd.com
°C
Max
20
50
4
Units
°C/W
°C/W
°C/W
Page 1 of 6
Electrical Characteristics (TJ=25°C unless otherwise noted)
Symbol
Parameter
STATIC PARAMETERS
Drain-Source Breakdown Voltage
BVDSS
Conditions
Min
ID=250µA, VGS=0V
Zero Gate Voltage Drain Current
IGSS
VGS(th)
Gate-Body leakage current
VDS=0V, VGS=±20V
Gate Threshold Voltage
VDS=VGS, ID=250µA
1.4
TJ=125°C
VGS=4.5V, ID=20A
gFS
Forward Transconductance
VSD
Diode Forward Voltage
IS=1A,VGS=0V
IS
Maximum Body-Diode Continuous Current
Output Capacitance
Crss
Reverse Transfer Capacitance
Rg
Gate resistance
±100
nA
2.2
V
4.3
5.2
6.3
7.6
6.8
8.6
mΩ
1
V
30
A
mΩ
67
VGS=0V, VDS=15V, f=1MHz
f=1MHz
µA
1.8
0.71
DYNAMIC PARAMETERS
Ciss
Input Capacitance
Coss
V
5
VGS=10V, ID=20A
VDS=5V, ID=20A
Units
1
TJ=55°C
Static Drain-Source On-Resistance
Max
30
VDS=30V, VGS=0V
IDSS
RDS(ON)
Typ
0.6
S
820
pF
340
pF
40
pF
1.2
1.8
Ω
SWITCHING PARAMETERS
Qg(10V) Total Gate Charge
13
Qg(4.5V) Total Gate Charge
6.1
nC
2
nC
VGS=10V, VDS=15V, ID=20A
nC
Qgs
Gate Source Charge
Qgd
Gate Drain Charge
2.4
nC
tD(on)
Turn-On DelayTime
6.5
ns
VGS=10V, VDS=15V, RL=0.75Ω,
RGEN=3Ω
16.5
ns
17
ns
tr
Turn-On Rise Time
tD(off)
Turn-Off DelayTime
tf
trr
Turn-Off Fall Time
2.5
ns
IF=20A, dI/dt=500A/µs
11
Qrr
Body Diode Reverse Recovery Charge IF=20A, dI/dt=500A/µs
19
ns
nC
Body Diode Reverse Recovery Time
A. The value of RθJA is measured with the device mounted on 1in2 FR-4 board with 2oz. Copper, in a still air environment with TA =25°C. The Power
dissipation PDSM is based on R θJA t≤ 10s and the maximum allowed junction temperature of 150°C. The value in any given application depends on
the user's specific board design.
B. The power dissipation PD is based on TJ(MAX)=150°C, using junction-to-case thermal resistance, and is more useful in setting the upper
dissipation limit for cases where additional heatsinking is used.
C. Single pulse width limited by junction temperature TJ(MAX)=150°C.
D. The RθJA is the sum of the thermal impedance from junction to case RθJC and case to ambient.
E. The static characteristics in Figures 1 to 6 are obtained using <300µs pulses, duty cycle 0.5% max.
F. These curves are based on the junction-to-case thermal impedance which is measured with the device mounted to a large heatsink, assuming a
maximum junction temperature of TJ(MAX)=150°C. The SOA curve provides a single pulse rating.
G. The maximum current rating is package limited.
H. These tests are performed with the device mounted on 1 in2 FR-4 board with 2oz. Copper, in a still air environment with TA=25°C.
THIS PRODUCT HAS BEEN DESIGNED AND QUALIFIED FOR THE CONSUMER MARKET. APPLICATIONS OR USES AS CRITICAL
COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS ARE NOT AUTHORIZED. AOS DOES NOT ASSUME ANY LIABILITY ARISING
OUT OF SUCH APPLICATIONS OR USES OF ITS PRODUCTS. AOS RESERVES THE RIGHT TO IMPROVE PRODUCT DESIGN,
FUNCTIONS AND RELIABILITY WITHOUT NOTICE.
Rev. 1.0: October 2014
www.aosmd.com
Page 2 of 6
TYPICAL ELECTRICAL AND THERMAL CHARACTERISTICS
70
70
4V
60
4.5V
50
50
10V
3.5V
40
ID(A)
ID (A)
VDS=5V
60
30
20
40
125°C
30
25°C
20
VGS=3V
10
10
0
0
0
1
2
3
4
0
5
1
3
4
5
VGS(Volts)
Figure 2: Transfer Characteristics (Note E)
VDS (Volts)
Figure 1: On-Region Characteristics (Note E)
10
Normalized On-Resistance
1.8
8
RDS(ON) (mΩ)
2
VGS=4.5V
6
4
VGS=10V
2
1.6
VGS=10V
ID=20A
1.4
1.2
VGS=4.5V
ID=20A
1
0.8
0
0
5
10
15
20
25
0
30
25
50
75
100
125
150
175
Temperature (°C)
Figure 4: On-Resistance vs. Junction Temperature
(Note E)
ID (A)
Figure 3: On-Resistance vs. Drain Current and Gate
Voltage (Note E)
20
1.0E+01
ID=20A
1.0E+00
16
12
IS (A)
RDS(ON) (mΩ)
125°C
1.0E-01
125°C
1.0E-02
25°C
8
1.0E-03
25°C
4
1.0E-04
0
1.0E-05
2
4
6
8
10
VGS (Volts)
Figure 5: On-Resistance vs. Gate-Source Voltage
(Note E)
Rev. 1.0: October 2014
www.aosmd.com
0.0
0.2
0.4
0.6
0.8
1.0
VSD (Volts)
Figure 6: Body-Diode Characteristics (Note E)
Page 3 of 6
TYPICAL ELECTRICAL AND THERMAL CHARACTERISTICS
10
1200
VDS=15V
ID=20A
1000
8
Capacitance (pF)
VGS (Volts)
Ciss
6
4
2
800
600
200
0
Crss
0
0
3
6
9
12
15
0
Qg (nC)
Figure 7: Gate-Charge Characteristics
10
15
20
25
30
500
10µs
RDS(ON)
limited
10µs
100µs
1ms
10ms
DC
1.0
0.0
0.01
300
200
100
TJ(Max)=150°C
TC=25°C
0.1
TJ(Max)=150°C
TC=25°C
400
Power (W)
100.0
10.0
5
VDS (Volts)
Figure 8: Capacitance Characteristics
1000.0
ID (Amps)
Coss
400
0.1
1
10
VDS (Volts)
VGS> or equal to 4.5V
Figure 9: Maximum Forward Biased Safe
Operating Area (Note F)
0
1E-05 0.0001 0.001
100
0.01
0.1
1
10
Pulse Width (s)
Figure 10: Single Pulse Power Rating Junction-toCase (Note F)
ZθJC Normalized Transient
Thermal Resistance
10
D=Ton/T
TJ,PK=TC+PDM.ZθJC.RθJC
In descending order
D=0.5, 0.3, 0.1, 0.05, 0.02, 0.01, single pulse
RθJC=4°C/W
1
0.1
PD
Single Pulse
Ton
T
0.01
1E-05
0.0001
0.001
0.01
0.1
1
10
Pulse Width (s)
Figure 11: Normalized Maximum Transient Thermal Impedance (Note F)
Rev. 1.0: October 2014
www.aosmd.com
Page 4 of 6
40
80
30
60
Current rating ID(A)
Power Dissipation (W)
TYPICAL ELECTRICAL AND THERMAL CHARACTERISTICS
20
10
40
20
0
0
0
25
50
75
100
125
150
0
25
TCASE (°C)
Figure 12: Power De-rating (Note F)
50
75
100
125
150
TCASE (°C)
Figure 13: Current De-rating (Note F)
10000
TA=25°C
Power (W)
1000
100
10
1
1E-05
0.001
0.1
10
1000
ZθJA Normalized Transient
Thermal Resistance
Pulse Width (s)
Figure 14: Single Pulse Power Rating Junction-to-Ambient (Note H)
10
1
D=Ton/T
TJ,PK=TA+PDM.ZθJA.RθJA
RθJA=50°C/W
In descending order
D=0.5, 0.3, 0.1, 0.05, 0.02, 0.01, single pulse
0.1
0.01
PD
Single Pulse
Ton
0.001
0.0001
0.001
0.01
0.1
1
10
T
100
1000
Pulse Width (s)
Figure 15: Normalized Maximum Transient Thermal Impedance (Note H)
Rev. 1.0: October 2014
www.aosmd.com
Page 5 of 6
Gate Charge Test Circuit & Waveform
Vgs
Qg
10V
+
+ Vds
VDC
-
Qgs
Qgd
VDC
-
DUT
Vgs
Ig
Charge
Resistive Switching Test Circuit & Waveforms
RL
Vds
Vds
DUT
Vgs
90%
+ Vdd
VDC
-
Rg
10%
Vgs
Vgs
td(on)
tr
td(off)
ton
tf
toff
Unclamped Inductive Switching (UIS) Test Circuit & Waveforms
L
2
EAR= 1/2 LIAR
Vds
BVDSS
Vds
Id
+ Vdd
Vgs
Vgs
I AR
VDC
-
Rg
Id
DUT
Vgs
Vgs
Diode Recovery Test Circuit & Waveforms
Q rr = - Idt
Vds +
DUT
Vds -
Isd
Vgs
Ig
Rev. 1.0: October 2014
Vgs
L
Isd
+ Vdd
t rr
dI/dt
I RM
Vdd
VDC
-
IF
Vds
www.aosmd.com
Page 6 of 6