AOS Semiconductor Product Reliability Report AON6504, rev A Plastic Encapsulated Device ALPHA & OMEGA Semiconductor, Inc www.aosmd.com This AOS product reliability report summarizes the reliability result for AON6504. Accelerated environmental tests are performed on a specific sample size, and then followed by electrical test at end point. Review of final electrical test result confirms that AON6504 passes AOS quality and reliability requirements. Table of Contents: I. II. III. IV. Product Description Package and Die information Environmental Stress Test Summary and Result Reliability Evaluation I. Product Description: General description: • Latest Trench Power AlphaMOS (αMOS LV) technology • Very Low RDS(on) at 4.5VGS • Low Gate Charge • High Current Capability • RoHS and Halogen-Free Compliant Application: • DC/DC Converters in Computing, Servers, and POL • Isolated DC/DC Converters in Telecom and Industrial Detailed information refers to datasheet. II. Die / Package Information: AON6504 Standard sub-micron Low voltage N channel Package Type DFN 5x6 Lead Frame Copper Die Attach Solder paste Bonding Wire N.A for Clip bond Mold Material Epoxy resin with silica filler MSL (moisture sensitive level) Level 1 based on J-STD-020 Process Note * based on information provided by assembler and mold compound supplier III. Result of Reliability Stress for AON6504 Test Item Test Condition Time Point MSL Precondition 168hr 85°c /85%RH +3 cycle reflow@260°c - HTGB Temp = 150 °c, Vgs=100% of Vgsmax 168hrs 500 hrs 1000 hrs Temp = 150 °c, Vds=80% of Vdsmax 168hrs 500 hrs 1000 hrs 4 lots 130 +/- 2°°c, 85%RH, 33.3 psi, Vgs = 100% of Vgs max 121°°c, 29.7psi, RH=100% 100 hrs 96 hrs -65°°c to 150°°c, air to air 250 / 500 cycles HTRB HAST Pressure Pot Temperature Cycle Lot Attribution Total Sample size Number of Failures Standard 12 lots 1540pcs 0 JESD22A113 308pcs 0 JESD22A108 77pcs / lot 308pcs 0 JESD22A108 12 lots 77pcs / lot 660pcs 0 JESD22A110 (Note A*) 6 lots 55pcs / lot 330pcs 0 JESD22A102 (Note A*) 10 lots 55pcs / lot 550pcs 0 JESD22A104 (Note A*) 55pcs / lot 4 lots Note A: The reliability data presents total of available generic data up to the published date. IV. Reliability Evaluation FIT rate (per billion): 6 MTTF = 19828 years The presentation of FIT rate for the individual product reliability is restricted by the actual burn-in sample size of the selected product (AON6504). Failure Rate Determination is based on JEDEC Standard JESD 85. FIT means one failure per billion hours. 2 9 9 Failure Rate = Chi x 10 / [2 (N) (H) (Af)] = 1.83 x 10 9 8 MTTF = 10 / FIT = 1.74 x 10 hrs = 19828 years / [2x (4x2x77) x (1000) x (258)] = 6 Chi² = Chi Squared Distribution, determined by the number of failures and confidence interval N = Total Number of units from HTRB and HTGB tests H = Duration of HTRB/HTGB testing Af = Acceleration Factor from Test to Use Conditions (Ea = 0.7eV and Tuse = 55°C) Acceleration Factor [Af] = Exp [Ea / k (1/Tj u – 1/Tj s)] Acceleration Factor ratio list: Af 55 deg C 70 deg C 85 deg C 100 deg C 115 deg C 130 deg C 150 deg C 258 87 32 13 5.64 2.59 1 Tj s = Stressed junction temperature in degree (Kelvin), K = C+273.16 Tj u = The use junction temperature in degree (Kelvin), K = C+273.16 -5 K = Boltzmann’s constant, 8.617164 X 10 eV / K