Product family datasheet BackLED XL Plus G15 LED modules for light advertising and backlighting Areas of application _ Signage and illuminated advertising _ Backlighting of single and double-sided light boxes (backlighting) _ Permanent outdoor use in enclosed light boxes _ Decorative applications __ Product benefits _ Uniform illumination at high LED pitches thanks to Flat Ray technology _ Click and Play: quick and easy click-in of the LED modules, no tools needed _ Excellent module efficacy _ Very long lifetime _ 5 year guarantee Product features _ Connected with flexible cables _ Type of protection (modules): IP66 _ Color rendering index R : > 80 a _ Special robust encapsulation _ CE marked and UL listed June 21, 2016, 06:31:36 BackLED XL Plus G15 © 2016, OSRAM GmbH. All rights reserved. Page 1 of 8 Product family datasheet Technical data Electrical data Product description Nominal voltage Nominal wattage Nominal wattage per LED module Reverse Voltage Input voltage range Type of current BA-XL-PL -865 24.0 V 100.0 W 3.1 W 25 V 23…25 V DC BA-XL-PL -840 24.0 V 100.0 W 3.1 W 25 V 23…25 V DC BA-XL-PL -830 24.0 V 100.0 W 3.1 W 25 V 23…25 V DC Photometrical data Product description Color temperature Color rendering index Ra Light color (designation) Light color LED Luminous flux per module chain Luminous flux per LED module BA-XL-PL -865 6500 K ≥80 Cold White White 9544 lm 298.3 lm BA-XL-PL -840 4000 K ≥80 Daylight White 9394 lm 293.6 lm BA-XL-PL -830 3000 K ≥80 Warm White White 8697 lm 271.8 lm Product description Luminous efficacy Standard deviation of color matching BA-XL-PL -865 97 lm/W ≤3 sdcm BA-XL-PL -840 94 lm/W ≤3 sdcm BA-XL-PL -830 87 lm/W ≤3 sdcm __ Light technical data Product description Beam angle BA-XL-PL -865 150 ° BA-XL-PL -840 150 ° BA-XL-PL -830 150 ° LED module information Product description Number of LEDs per module Number of LED modules per chain Minimum operable number of LED modules BA-XL-PL -865 6 32 1 BA-XL-PL -840 6 32 1 BA-XL-PL -830 6 32 1 June 21, 2016, 06:31:36 BackLED XL Plus G15 © 2016, OSRAM GmbH. All rights reserved. Page 2 of 8 Product family datasheet Dimensions & weight Product description Length Width Height Product weight BA-XL-PL -865 15820 mm 1) 35.0 mm 17.0 mm 56.00 g 2) BA-XL-PL -840 15820 mm 1) 35.0 mm 17.0 mm 56.00 g 2) BA-XL-PL -830 15820 mm 1) 35.0 mm 17.0 mm 56.00 g 2) 1) LED pitch 500 mm 2) Per chain Product line drawing __ BA-XL-PL -865, BA-XL-PL -840, BA-XL-PL -830 Temperatures & operating conditions Product description Temperature range in operation [PIM] BA-XL-PL -865 -20…85 °C 1) BA-XL-PL -840 -20…85 °C 1) BA-XL-PL -830 -20…85 °C 1) 1) At the T point c June 21, 2016, 06:31:36 BackLED XL Plus G15 © 2016, OSRAM GmbH. All rights reserved. Page 3 of 8 Product family datasheet Lifespan Product description Lifespan BA-XL-PL -865 50000 h 1) BA-XL-PL -840 50000 h 1) BA-XL-PL -830 50000 h 1) 1) L70/B50 at Tc max. 85 °C Capabilities Product description Dimmable BA-XL-PL -865 No BA-XL-PL -840 No BA-XL-PL -830 No Certificates & standards __ Product description Energy consumption Energy efficiency class Type of protection BA-XL-PL -865 4 kWh/1000h A IP66 BA-XL-PL -840 4 kWh/1000h A IP66 BA-XL-PL -830 4 kWh/1000h A IP66 Product description Standards BA-XL-PL -865 Acc. to IEC 61347-2-13/Acc. to EN 55015/Acc. to EN 61547/Acc. to EN 61000-3-2/Acc. to EN 62384 BA-XL-PL -840 Acc. to IEC 61347-2-13/Acc. to EN 55015/Acc. to EN 61547/Acc. to EN 61000-3-2/Acc. to EN 62384 BA-XL-PL -830 Acc. to IEC 61347-2-13/Acc. to EN 55015/Acc. to EN 61547/Acc. to EN 61000-3-2/Acc. to EN 62384 Logistical data Product description Temperature range at storage BA-XL-PL -865 -20…85 °C BA-XL-PL -840 -20…85 °C BA-XL-PL -830 -20…85 °C June 21, 2016, 06:31:36 BackLED XL Plus G15 © 2016, OSRAM GmbH. All rights reserved. Page 4 of 8 Product family datasheet Light Distribution BA-XL-PL -865 BA-XL-PL -840 __ BA-XL-PL -830 Equipment / Accessories _ BoxLED mounting profile BX-MP June 21, 2016, 06:31:36 BackLED XL Plus G15 © 2016, OSRAM GmbH. All rights reserved. Page 5 of 8 Product family datasheet _ Several types of OPTOTRONIC 24 V power supplies available Application advice For more detailed application information and graphics please see product datasheet. Additional product information _ Installation of LED modules (with power supplies) needs to be made under consideration of all valid regulations and norms. _ Installation by qualified electrician only. _ Please see the relevant application guides and instructions sheets for more detailed safety and mounting information. Additional information is available on request. _ Complies with IEC/EN 61547 _ Complies with IEC/EN 61000-3-2 _ Complies with EN 55015, CISPR 15 _ Complies with IEC/EN 61347-1 _ Complies with IEC/EN 61347-2-13 _ LED modules are dimmable by means of PWM (pulse width modulation). It is recommended using the following OSRAM control gears: OPTOTRONIC OT DIM or OPTOTRONIC 24 V power supplies with integrated 1…10 V dimming interface. _ Parallel connection is mandatory for safe electrical operation. Serial connection of LED modules is stronly discouraged. Unbalanced voltage drop in serial connection can cause hazardous overload and damage the LED module. _ Electrical contact is achieved with the contact cables or the terminals of the module. Please refer to the technical data for maximum number of LED modules that can be operated on one control gear. _ In order to operate OSRAM LED modules safely, it is absolutely necessary to operate them with an electronically stabilized __ power supply that protects against short circuits, overload and overheating. _ In case other power supplies than OSRAM OPTOTRONIC are used, compliance to the neccessary operating parameters (voltage, current, power) has to be ensured. _ Pay attention to polarity! Wrong polarity can cause destruction or malfunction of the module. _ Conducting paths on the circuit board must not be damaged or destroyed during installation. _ The LED module itself and all its components must not be stressed mechanically. _ Operation in or under water is prohibited. _ To avoid mechanical damage, the LED modules have to be attached securely to the intended mounting surface. It is recommended to avoid heavy vibration. _ In case that the LED module is equipped with a pre-mounted double-sided adhesive tape, OSRAM assumes no liability and provides no guarantee for a permanent adherence of the modules to the surface. OSRAM recommends fixation of the modules by means of suitable screws. _ Complies with IEC 61347-1 cl. 18.3, cl. 18.4, IEC 60695-2-10, IEC 60695-11-5, IEC 60695-11-10 (classification V-0) _ All the technical parameters apply to the entire module. In view of the complex manufacturing process for light emitting diodes, the specified typical values for the technical LED parameters are merely statistical values that do not necessarily correspond to the actual technical parameters of an individual product; individual products may vary from the typical values. _ Module contains no PVC material. _ To ensure uniform illumination, a reflective matt white surface is generally recommended for all internal frame walls and back panels of light boxes. _ The module may cause noises during dimming. If a dimming operation is required, it is recommended to check the dimming operation for noises before final installation. Sales and Technical Support Sales and Technical Support www.osram.com June 21, 2016, 06:31:36 BackLED XL Plus G15 © 2016, OSRAM GmbH. All rights reserved. Page 6 of 8 Product family datasheet Download Data File Brochures Impressive backlighting for signage and presentation (GB) Brochures Technical application guide BackLED PlusBasic G15 and BoxLED Plus G15 (GB) Declarations of conformity EC-DoC BackLED XL Plus G15 Declarations of conformity Manufacturer-DoC BackLED XL Plus G15 Installation/Operation notice Instruction Manual forBackLED XL Plus G15 CAD data 3-dim LUM MOSAIC FLEX BASIC KI CAD data 3-dim BA-XL-PL 8XX G15 IGS CAD data PDF BackLED XL Plus G15 CAD PDF Eulumdat BackLED XL Plus 865 G15 Eulumdat IES data BackLED XL Plus 865 G15 IES __ Eulumdat BackLED XL Plus 840 G15 Eulumdat IES data BackLED XL Plus 840 G15 IES Eulumdat BackLED XL Plus 830 G15 Eulumdat IES data BackLED XL Plus 830 G15 IES Logistical Data Product code Product description Packaging unit (Pieces/Unit) Dimensions (length x width x height) Volume Gross weight 4052899245815 BA-XL-PL -865 Shipping carton box 5 502 mm x 428 mm x 276 mm 59.30 dm³ 12351.00 g 4052899245839 BA-XL-PL -840 Shipping carton box 5 502 mm x 428 mm x 276 mm 59.30 dm³ 11640.00 g 4052899245853 BA-XL-PL -830 Shipping carton box 5 502 mm x 428 mm x 276 mm 59.30 dm³ 11640.00 g The mentioned product code describes the smallest quantity unit which can be ordered. One shipping unit can contain one or more single products. When placing an order, for the quantity please enter single or multiples of a shipping unit. June 21, 2016, 06:31:36 BackLED XL Plus G15 © 2016, OSRAM GmbH. All rights reserved. Page 7 of 8 Product family datasheet Accessories Optional Product description Accessory name Accessory code BA-XL-PL -865 BoxLED, -MP 4008321981127 BA-XL-PL -840 BoxLED, -MP 4008321981127 BA-XL-PL -830 BoxLED, -MP 4008321981127 References / Links For more information on the multi-level guarantee and the terms and conditions of the guarantee visit www.osram.com/system-guarantee Disclaimer Subject to change without notice. Errors and omission excepted. Always make sure to use the most recent release. __ June 21, 2016, 06:31:36 BackLED XL Plus G15 © 2016, OSRAM GmbH. All rights reserved. Page 8 of 8