Product family datasheet BoxLED Side Plus LED modules for light advertising and backlighting Areas of application _ Signage and illuminated advertising _ Illumination of single and double-sided light boxes _ Permanent outdoor use in enclosed light boxes __ Product benefits _ Modules are compatible with the BoxLED mounting profile _ Uniform illumination thanks to optimized elliptical lenses _ Several options for quick and simple mounting: bolting or snap-in _ Excellent module efficacy _ Very long lifetime Product features _ Chain of 32 linear LED modules _ Connected with flexible cables _ Maximum length of one chain: 9.60 m _ Type of protection (modules): IP66 _ Special robust encapsulation _ Fully integrated heat sink June 15, 2016, 07:46:32 BoxLED Side Plus © 2016, OSRAM GmbH. All rights reserved. Page 1 of 7 Product family datasheet Technical data Electrical data Product description Nominal voltage Nominal wattage per LED module Rated wattage Reverse Voltage Input voltage range Type of current BX06SA -W4F-765 24.0 V 3.6 W 115.20 W 25 V 23…25 V DC BX06SA -W4F-840 24.0 V 3.6 W 115.20 W 25 V 23…25 V DC BX06SA -W4F-830 24.0 V 3.6 W 115.20 W 25 V 23…25 V DC Photometrical data Product description Color temperature Color rendering index Ra Light color (designation) Light color LED Total useful luminous flux Luminous flux per module chain BX06SA -W4F-765 6500 K 70 Daylight White 290 lm 9280 lm BX06SA -W4F-840 4000 K Cool White White 7680 lm BX06SA -W4F-830 3000 K Warm White White 7680 lm Product description Nominal useful luminous flux 90° Rated useful luminous flux 90° Luminous efficacy Rated peak intensity Standard deviation of color matching BX06SA -W4F-765 219 lm 290 lm 81 lm/W 755 cd ≤4 sdcm __ BX06SA -W4F-840 67 lm/W BX06SA -W4F-830 67 lm/W Light technical data Product description Starting time Rated beam angle (half peak value) Warm-up time (60 %) Nominal beam angle BX06SA -W4F-765 0.0 s 12.00 … 65.00 ° 1.00 s 12 x 65 ° BX06SA -W4F-840 BX06SA -W4F-830 June 15, 2016, 07:46:32 BoxLED Side Plus © 2016, OSRAM GmbH. All rights reserved. Page 2 of 7 Product family datasheet LED module information Product description Number of LEDs per module Number of LED modules per chain Minimum operable number of LED modules BX06SA -W4F-765 6 32 1 BX06SA -W4F-840 6 32 1 BX06SA -W4F-830 6 32 1 Product description Construction length Rated width Rated height Product weight BX06SA -W4F-765 9600.0 mm 35.0 mm 20.50 mm 1905.00 g 1) BX06SA -W4F-840 9600.0 mm 1905.00 g 1) BX06SA -W4F-830 9600.0 mm 1905.00 g 1) Dimensions & weight 1) Per chain Product line drawing __ BX06SA -W4F-765, BX06SA -W4F-840, BX06SA -W4F-830 June 15, 2016, 07:46:32 BoxLED Side Plus © 2016, OSRAM GmbH. All rights reserved. Page 3 of 7 Product family datasheet Temperatures & operating conditions Product description Temperature range in operation [PIM] BX06SA -W4F-765 -25…95 °C 1) BX06SA -W4F-840 -25…95 °C 1) BX06SA -W4F-830 -25…95 °C 1) 1) At the T point c Lifespan Product description Lumen main. fact. at end of nom. life time Nominal lamp life time Rated lamp life time Number of switching cycles BX06SA -W4F-765 0.70 50000 h 1) 50000 h 1) 15000 BX06SA -W4F-840 50000 h 1) 50000 h 1) BX06SA -W4F-830 50000 h 1) 50000 h 1) 1) At T 95 °C c __ Capabilities Product description Dimmable Dimming range BX06SA -W4F-765 Yes 5…100 % BX06SA -W4F-840 Yes 5…100 % BX06SA -W4F-830 Yes 5…100 % Certificates & standards Product description Energy consumption Energy efficiency class Type of protection BX06SA -W4F-765 4 kWh/1000h A+ IP66 BX06SA -W4F-840 IP66 BX06SA -W4F-830 IP66 Product description Standards BX06SA -W4F-765 Acc. to EC 61347-2-13/Acc. to EN 55015/Acc. to IEC 61547/Acc. to IEC 61000-3-2 BX06SA -W4F-840 Acc. to EC 61347-2-13/Acc. to EN 55015/Acc. to IEC 61547/Acc. to IEC 61000-3-2 BX06SA -W4F-830 Acc. to EC 61347-2-13/Acc. to EN 55015/Acc. to IEC 61547/Acc. to IEC 61000-3-2 June 15, 2016, 07:46:32 BoxLED Side Plus © 2016, OSRAM GmbH. All rights reserved. Page 4 of 7 Product family datasheet Logistical data Product description Temperature range at storage BX06SA -W4F-765 -25…85 °C BX06SA -W4F-840 -25…85 °C BX06SA -W4F-830 -25…85 °C Light Distribution __ BX06SA -W4F-765, BX06SA -W4F-840, BX06SA -W4F-830 Equipment / Accessories _ Several types of OPTOTRONIC 24 V power supplies available Application advice For more detailed application information and graphics please see product datasheet. Additional product information _ Installation of LED modules (with power supplies) needs to be made under consideration of all valid regulations and norms. _ Installation by qualified electrician only. _ Please see the relevant application guides and instructions sheets for more detailed safety and mounting information. June 15, 2016, 07:46:32 BoxLED Side Plus © 2016, OSRAM GmbH. All rights reserved. Page 5 of 7 Product family datasheet Additional information is available on request. _ Complies with IEC/EN 61547 _ Complies with IEC/EN 61000-3-2 _ Complies with EN 55015, CISPR 15 _ Complies with IEC/EN 61347-1 _ Complies with IEC/EN 61347-2-13 _ LED modules are dimmable by means of PWM (pulse width modulation). It is recommended using the following OSRAM __ control gears: OPTOTRONIC OT DIM, OT DALI DIM or OPTOTRONIC 24 V power supplies with integrated 1…10 V dimming interface. _ Parallel connection is mandatory for safe electrical operation. Serial connection of LED modules is stronly discouraged. Unbalanced voltage drop in serial connection can cause hazardous overload and damage the LED module. _ Electrical contact is achieved with the contact cables or the terminals of the module. Please refer to the technical data for maximum number of LED modules that can be operated on one control gear. _ In order to operate OSRAM LED modules safely, it is absolutely necessary to operate them with an electronically stabilized power supply that protects against short circuits, overload and overheating. _ In case other power supplies than OSRAM OPTOTRONIC are used, compliance to the neccessary operating parameters (voltage, current, power) has to be ensured. _ Pay attention to polarity! Wrong polarity can cause destruction or malfunction of the module. _ Conducting paths on the circuit board must not be damaged or destroyed during installation. _ The LED module itself and all its components must not be stressed mechanically. _ Operation in or under water is prohibited. _ To avoid mechanical damage, the LED modules have to be attached securely to the intended mounting surface. It is recommended to avoid heavy vibration. _ In case that the LED module is equipped with a pre-mounted double-sided adhesive tape, OSRAM assumes no liability and provides no guarantee for a permanent adherence of the modules to the surface. OSRAM recommends fixation of the modules by means of suitable screws. _ Complies with IEC 61347-1 cl. 18.3, cl. 18.4, IEC 60695-2-10, IEC 60695-11-5, IEC 60695-11-10 (classification V-0) _ To ensure uniform illumination, a reflective matt white surface is generally recommended for all internal frame walls and back panels of light boxes. Sales and Technical Support Sales and Technical Support www.osram.com Download Data File Brochures Impressive backlighting for signage and presentation (GB) Brochures Technical application guide BackLED PlusBasic G15 and BoxLED Plus G15 (GB) Declarations of conformity CE - Declaration of Conformity BoxLED Side Plus + BoxLED Back Plus Declarations of conformity EC-DoC BoxLED Side Plus Declarations of conformity Man-DoC BoxLED Side Plus Installation guide BoxLED Side Plus June 15, 2016, 07:46:32 BoxLED Side Plus © 2016, OSRAM GmbH. All rights reserved. Page 6 of 7 Product family datasheet CAD data PDF BoxLED Side Plus CAD PDF Eulumdat BOXLED SIDE PLUS BX06SA-W4F-765 Eulumdat BoxLED SIDE PLUS - BX06SA-W4F-765 (.IES) Product Datasheet Box LED Side Plus - BX06SA (EN) Product Datasheet BoxLED Side Plus - BX06SA (DE) Eulumdat BOXLED SIDE PLUS - BX06SA-W4F-840 Eulumdat BoxLED SIDE PLUS - BX06SA-W4F-840 (.IES) Eulumdat BOXLED SIDE PLUS BX06SA-W4F-830 Eulumdat BoxLED SIDE PLUS - BX06SA-W4F-830 (.IES) Logistical Data __ Product code Product description Packaging unit (Pieces/Unit) Dimensions (length x width x height) Volume Gross weight 4008321828606 BX06SA -W4F-765 Shipping carton box 1 485 mm x 398 mm x 52 mm 10.04 dm³ 2265.00 g 4008321828682 BX06SA -W4F-840 Shipping carton box 1 485 mm x 398 mm x 52 mm 10.04 dm³ 2265.00 g 4008321828767 BX06SA -W4F-830 Shipping carton box 1 485 mm x 398 mm x 52 mm 10.04 dm³ 2265.00 g The mentioned product code describes the smallest quantity unit which can be ordered. One shipping unit can contain one or more single products. When placing an order, for the quantity please enter single or multiples of a shipping unit. Accessories Optional Product description Accessory name Accessory code BX06SA -W4F-765 BoxLED, -MP 4008321981127 BX06SA -W4F-840 BoxLED, -MP 4008321981127 BX06SA -W4F-830 BoxLED, -MP 4008321981127 Disclaimer Subject to change without notice. Errors and omission excepted. Always make sure to use the most recent release. June 15, 2016, 07:46:32 BoxLED Side Plus © 2016, OSRAM GmbH. All rights reserved. Page 7 of 7