Family data sheet

Product family datasheet
BackLED L Plus G15
LED modules for light advertising and backlighting
Areas of application
_ Signage and illuminated advertising
_ Backlighting of single and double-sided light boxes
(backlighting)
_ Permanent outdoor use in enclosed light boxes
_ Decorative applications
__
Product benefits
_ Uniform illumination at high LED pitches thanks to Flat Ray technology
_ Click and Play: quick and easy click-in of the LED modules, no tools needed
_ Excellent module efficacy
_ Very long lifetime
_ 5 year guarantee
Product features
_ Connected with flexible cables
_ Type of protection (modules): IP66
_ Color rendering index R : > 80
a
_ Special robust encapsulation
_ CE marked and UL listed
June 21, 2016, 05:29:53
BackLED L Plus G15
© 2016, OSRAM GmbH. All rights reserved.
Page 1 of 8
Product family datasheet
Technical data
Electrical data
Product description
Nominal
voltage
Nominal
wattage
Nominal
wattage
per LED
module
Reverse
Voltage
Input voltage
range
Type of
current
BA-L-PL -865
12.0 V
52.0 W
1.56 W
13 V
12…13 V
DC
BA-L-PL -840
12.0 V
52.0 W
1.56 W
13 V
12…13 V
DC
BA-L-PL -830
12.0 V
52.0 W
1.56 W
13 V
12…13 V
DC
Photometrical data
Product description
Color
temperature
Color
rendering index
Ra
Light color
(designation)
Light color
LED
Luminous
flux per
module
chain
Luminous flux
per LED
module
BA-L-PL -865
6500 K
>70
Cold White
White
4772 lm
150 lm
BA-L-PL -840
4000 K
>80
Daylight
White
4697 lm
146.8 lm
BA-L-PL -830
3000 K
>80
Warm White
White
4349 lm
135.9 lm
Product description
Luminous
efficacy
Standard
deviation of
color
matching
BA-L-PL -865
94 lm/W
≤3 sdcm
BA-L-PL -840
90 lm/W
≤3 sdcm
BA-L-PL -830
84 lm/W
≤3 sdcm
__
Light technical data
Product description
Beam
angle
BA-L-PL -865
150 °
BA-L-PL -840
150 °
BA-L-PL -830
150 °
LED module information
Product description
Number of
LEDs per
module
Number of LED modules
per chain
Minimum
operable
number of
LED
modules
BA-L-PL -865
3
32
1
BA-L-PL -840
3
32
1
BA-L-PL -830
3
32
1
June 21, 2016, 05:29:53
BackLED L Plus G15
© 2016, OSRAM GmbH. All rights reserved.
Page 2 of 8
Product family datasheet
Dimensions & weight
Product description
Length
Width
Height
Product
weight
BA-L-PL -865
9600 mm 1)
17.5 mm
7.4 mm
16.00 g 2)
BA-L-PL -840
9600 mm 1)
17.5 mm
7.4 mm
16.00 g 2)
BA-L-PL -830
9600 mm 1)
17.5 mm
7.4 mm
16.00 g 2)
1) Maximum LED pitch 300 mm
2) Per chain
Product line drawing
__
BA-L-PL -865, BA-L-PL -840, BA-L-PL -830
Temperatures & operating conditions
Product description
Temperature
range in
operation
[PIM]
BA-L-PL -865
-25…75 °C 1)
BA-L-PL -840
-25…75 °C 1)
BA-L-PL -830
-25…75 °C 1)
1) At the T point
c
June 21, 2016, 05:29:53
BackLED L Plus G15
© 2016, OSRAM GmbH. All rights reserved.
Page 3 of 8
Product family datasheet
Lifespan
Product description
Lifespan
BA-L-PL -865
50000 h 1)
BA-L-PL -840
50000 h 1)
BA-L-PL -830
50000 h 1)
1) L70/B50 at Tc 75 °C
Capabilities
Product description
Dimmable
BA-L-PL -865
No
BA-L-PL -840
No
BA-L-PL -830
No
Certificates & standards
__
Product description
Energy
consumption
Energy
efficiency
class
Type of
protection
BA-L-PL -865
2 kWh/1000h
A+
IP66
BA-L-PL -840
2 kWh/1000h
A+
IP66
BA-L-PL -830
2 kWh/1000h
A+
IP66
Product description
Standards
BA-L-PL -865
Acc. to EN 61347-2-13/Acc. to EN 55015/Acc. to EN 61547/Acc. to EN
61000-3-2/Acc. to EN 62384
BA-L-PL -840
Acc. to EN 61347-2-13/Acc. to EN 55015/Acc. to EN 61547/Acc. to EN
61000-3-2/Acc. to EN 62384
BA-L-PL -830
Acc. to EN 61347-2-13/Acc. to EN 55015/Acc. to EN 61547/Acc. to EN
61000-3-2/Acc. to EN 62384
Logistical data
Product description
Temperature
range at
storage
BA-L-PL -865
-25…85 °C
BA-L-PL -840
-25…85 °C
BA-L-PL -830
-25…85 °C
June 21, 2016, 05:29:53
BackLED L Plus G15
© 2016, OSRAM GmbH. All rights reserved.
Page 4 of 8
Product family datasheet
Light Distribution
BA-L-PL -865
BA-L-PL -840
__
BA-L-PL -830
Equipment / Accessories
_ BackLED mounting profile BA-MP
June 21, 2016, 05:29:53
BackLED L Plus G15
© 2016, OSRAM GmbH. All rights reserved.
Page 5 of 8
Product family datasheet
_ Several types of OPTOTRONIC 12 V power supplies available
Application advice
For more detailed application information and graphics please see product datasheet.
Additional product information
_ Installation of LED modules (with power supplies) needs to be made under consideration of all valid regulations and norms.
_ Installation by qualified electrician only.
_ Please see the relevant application guides and instructions sheets for more detailed safety and mounting information.
Additional information is available on request.
_ Complies with IEC/EN 61547
_ Complies with IEC/EN 61000-3-2
_ Complies with EN 55015, CISPR 15
_ Complies with IEC/EN 61347-1
_ Complies with IEC/EN 61347-2-13
_ Parallel connection is mandatory for safe electrical operation. Serial connection of LED modules is stronly discouraged.
Unbalanced voltage drop in serial connection can cause hazardous overload and damage the LED module.
_ Electrical contact is achieved with the contact cables or the terminals of the module. Please refer to the technical data for
maximum number of LED modules that can be operated on one control gear.
_ In order to operate OSRAM LED modules safely, it is absolutely necessary to operate them with an electronically stabilized
power supply that protects against short circuits, overload and overheating.
_ In case other power supplies than OSRAM OPTOTRONIC are used, compliance to the neccessary operating parameters
__
(voltage, current, power) has to be ensured.
_ Pay attention to polarity! Wrong polarity can cause destruction or malfunction of the module.
_ Conducting paths on the circuit board must not be damaged or destroyed during installation.
_ The LED module itself and all its components must not be stressed mechanically.
_ Operation in or under water is prohibited.
_ To avoid mechanical damage, the LED modules have to be attached securely to the intended mounting surface. It is
recommended to avoid heavy vibration.
_ In case that the LED module is equipped with a pre-mounted double-sided adhesive tape, OSRAM assumes no liability and
provides no guarantee for a permanent adherence of the modules to the surface. OSRAM recommends fixation of the modules
by means of suitable screws.
_ Complies with IEC 61347-1 cl. 18.3, cl. 18.4, IEC 60695-2-10, IEC 60695-11-5, IEC 60695-11-10 (classification V-0)
_ All the technical parameters apply to the entire module. In view of the complex manufacturing process for light emitting
diodes, the specified typical values for the technical LED parameters are merely statistical values that do not necessarily
correspond to the actual technical parameters of an individual product; individual products may vary from the typical values.
_ Module contains no PVC material.
_ To ensure uniform illumination, a reflective matt white surface is generally recommended for all internal frame walls and back
panels of light boxes.
_ LED modules are dimmable by means of PWM (pulse width modulation). It is recommended using the following OSRAM
control gears: OPTOTRONIC OT DIM or OPTOTRONIC 24 V power supplies with integrated 1…10 V dimming interface.
_ The module may cause noises during dimming. If a dimming operation is required, it is recommended to check the dimming
operation for noises before final installation.
Sales and Technical Support
Sales and Technical Support www.osram.com
June 21, 2016, 05:29:53
BackLED L Plus G15
© 2016, OSRAM GmbH. All rights reserved.
Page 6 of 8
Product family datasheet
Download Data
File
Brochures
Impressive backlighting for signage and presentation (GB)
Brochures
Technical application guide BackLED PlusBasic G15 and BoxLED Plus G15 (GB)
Declarations of conformity
EC-DoC BackLED L Plus G15
Declarations of conformity
Manufacturer-DoC BackLED L Plus G15
Installation/Operation notice
Instruction guide BackLED S M L Plus G15 G10569011
Installation guide
Installation instruction BackLED L Plus G15
Installation guide
Instruction Manual BackLED SML Plus G15
CAD data 3-dim
BA03LA-W4F-8XX G15
CAD data 3-dim
BA03LA-W4F-8XX G15 IGS
CAD data PDF
BackLED L Plus G15 CAD PDF
__
Eulumdat
BackLED L Plus 865 G15 Eulumdat
IES data
BackLED L Plus 865 G15 IES
Eulumdat
BackLED L Plus 840 G15 Eulumdat
IES data
BackLED L Plus 840 G15 IES
Eulumdat
BackLED L Plus 830 G15 Eulumdat
IES data
BackLED L Plus 830 G15 IES
Logistical Data
Product code
Product description
Packaging unit (Pieces/Unit)
Dimensions (length x width x
height)
Volume
Gross weight
4052899240872
BA-L-PL -865
Shipping carton box
5
398 mm x 284 mm x 198 mm
22.38 dm³
3783.00 g
4052899240896
BA-L-PL -840
Shipping carton box
5
398 mm x 284 mm x 198 mm
22.38 dm³
3783.00 g
4052899240919
BA-L-PL -830
Shipping carton box
5
398 mm x 284 mm x 198 mm
22.38 dm³
3783.00 g
June 21, 2016, 05:29:53
BackLED L Plus G15
© 2016, OSRAM GmbH. All rights reserved.
Page 7 of 8
Product family datasheet
Product code
Product description
Packaging unit (Pieces/Unit)
Dimensions (length x width x
height)
Volume
Gross weight
The mentioned product code describes the smallest quantity unit which can be ordered. One shipping unit can contain one or
more single products. When placing an order, for the quantity please enter single or multiples of a shipping unit.
Accessories Optional
Product description
Accessory name
Accessory code
BA-L-PL -865
BackLED, -MP
4052899114081
BA-L-PL -840
BackLED, -MP
4052899114081
BA-L-PL -830
BackLED, -MP
4052899114081
References / Links
For more information on the multi-level guarantee and the terms and conditions of the guarantee visit
www.osram.com/system-guarantee
Disclaimer
__
Subject to change without notice. Errors and omission excepted. Always make sure to use the most recent release.
June 21, 2016, 05:29:53
BackLED L Plus G15
© 2016, OSRAM GmbH. All rights reserved.
Page 8 of 8