Product family datasheet BackLED DS Plus G15 LED modules for light advertising and backlighting Areas of application _ Signage and illuminated advertising _ Backlighting of double-sided light boxes and pylons _ Permanent outdoor use in enclosed light boxes __ Product benefits _ Uniform illumination at high LED pitches thanks to Flat Ray technology _ Click and Play: quick and easy click-in of the LED modules, no tools needed _ Excellent module efficacy _ Very long lifetime _ 5 year guarantee Product features _ Connected with flexible cables _ Type of protection (modules): IP66 _ Color rendering index R : > 80 a _ Special robust encapsulation _ CE marked and UL listed June 3, 2016, 20:56:30 BackLED DS Plus G15 © 2016, OSRAM GmbH. All rights reserved. Page 1 of 7 Product family datasheet Technical data Electrical data Product description Nominal voltage Nominal wattage Nominal wattage per LED module Reverse Voltage Input voltage range Type of current BA-DS-PL -865 24.0 V 100.0 W 6.2 W 25 V 23…25 V DC Photometrical data __ Product description Color temperature Color rendering index Ra Light color (designation) Light color LED Luminous flux per module chain Luminous flux per LED module BA-DS-PL -865 6500 K >80 Cool White White 9756 lm 609.8 lm Product description Luminous efficacy Standard deviation of color matching BA-DS-PL -865 98 lm/W ≤3 sdcm 1) 1) 304.9 lm on each side Light technical data Product description Beam angle BA-DS-PL -865 150 ° LED module information Product description Number of LEDs per module Number of LED modules per chain Minimum operable number of LED modules BA-DS-PL -865 12 16 1 Dimensions & weight Product description Length Width Height Product weight BA-DS-PL -865 6400 mm 1) 56.0 mm 12.1 mm 1304.00 g 2) 1) Maximum LED pitch 400 mm 2) Per chain June 3, 2016, 20:56:30 BackLED DS Plus G15 © 2016, OSRAM GmbH. All rights reserved. Page 2 of 7 Product family datasheet Product line drawing BA-DS-PL -865 __ Temperatures & operating conditions Product description Temperature range in operation [PIM] BA-DS-PL -865 -25…80 °C 1) 1) At the T point c Lifespan Product description Lifespan BA-DS-PL -865 50000 h 1) 1) L70/B50 at Tc max. 80 °C Capabilities Product description Dimmable Dimming range BA-DS-PL -865 Yes 5…100 % June 3, 2016, 20:56:30 BackLED DS Plus G15 © 2016, OSRAM GmbH. All rights reserved. Page 3 of 7 Product family datasheet Certificates & standards Product description Energy consumption Energy efficiency class Type of protection BA-DS-PL -865 7 kWh/1000h A IP66 Product description Standards BA-DS-PL -865 Acc. to EN 55015/Acc. to EN 61347-2-13/Acc. to EN 61547/Acc. to EN 61000-3-2 Logistical data Product description Temperature range at storage BA-DS-PL -865 -25…85 °C Light Distribution __ BA-DS-PL -865 Equipment / Accessories _ Several types of OPTOTRONIC 24 V power supplies available _ BackLED DS Plus G15 mounting profile _ BackLED DS Plus G15 mounting brackets June 3, 2016, 20:56:30 BackLED DS Plus G15 © 2016, OSRAM GmbH. All rights reserved. Page 4 of 7 Product family datasheet Application advice For more detailed application information and graphics please see product datasheet. Additional product information _ Installation of LED modules (with power supplies) needs to be made under consideration of all valid regulations and norms. _ Installation by qualified electrician only. _ Please see the relevant application guides and instructions sheets for more detailed safety and mounting information. Additional information is available on request. _ Complies with IEC/EN 61547 _ Complies with IEC/EN 61000-3-2 _ Complies with EN 55015, CISPR 15 _ Complies with IEC/EN 61347-1 _ Complies with IEC/EN 61347-2-13 _ LED modules are dimmable by means of PWM (pulse width modulation). It is recommended using the following OSRAM control gears: OPTOTRONIC OT DIM or OPTOTRONIC 24 V power supplies with integrated 1…10 V dimming interface. _ Parallel connection is mandatory for safe electrical operation. Serial connection of LED modules is stronly discouraged. Unbalanced voltage drop in serial connection can cause hazardous overload and damage the LED module. _ Electrical contact is achieved with the contact cables or the terminals of the module. Please refer to the technical data for maximum number of LED modules that can be operated on one control gear. _ In order to operate OSRAM LED modules safely, it is absolutely necessary to operate them with an electronically stabilized power supply that protects against short circuits, overload and overheating. _ In case other power supplies than OSRAM OPTOTRONIC are used, compliance to the neccessary operating parameters __ (voltage, current, power) has to be ensured. _ Pay attention to polarity! Wrong polarity can cause destruction or malfunction of the module. _ Conducting paths on the circuit board must not be damaged or destroyed during installation. _ The LED module itself and all its components must not be stressed mechanically. _ Operation in or under water is prohibited. _ To avoid mechanical damage, the LED modules have to be attached securely to the intended mounting surface. It is recommended to avoid heavy vibration. _ In case that the LED module is equipped with a pre-mounted double-sided adhesive tape, OSRAM assumes no liability and provides no guarantee for a permanent adherence of the modules to the surface. OSRAM recommends fixation of the modules by means of suitable screws. _ Complies with IEC 61347-1 cl. 18.3, cl. 18.4, IEC 60695-2-10, IEC 60695-11-5, IEC 60695-11-10 (classification V-0) _ Module contains no PVC material. _ To ensure uniform illumination, a reflective matt white surface is generally recommended for all internal frame walls and back panels of light boxes. _ The module may cause noises during dimming. If a dimming operation is required, it is recommended to check the dimming operation for noises before final installation. Sales and Technical Support Sales and Technical Support www.osram.com Download Data File June 3, 2016, 20:56:30 BackLED DS Plus G15 © 2016, OSRAM GmbH. All rights reserved. Page 5 of 7 Product family datasheet Brochures Impressive backlighting for signage and presentation (GB) Brochures Technical application guide BackLED PlusBasic G15 and BoxLED Plus G15 (GB) Declarations of conformity EC-DoC BackLED DS Plus G15 Declarations of conformity Manufacturer-DoC BackLED DS Plus G15 Installation guide Instruction manual for BackLED DS Plus G15 CAD data 3-dim LUM MONAVI WHITE 6W 845.ti CAD data 3-dim BA-DS-PL 865 G15 IGS File CAD data PDF BackLED DS Plus G15 CAD PDF Eulumdat BackLED DS Plus 6500K G15 Eulumdat IES data BackLED DS Plus 6500K G15 IES __ Logistical Data Product code Product description Packaging unit (Pieces/Unit) Dimensions (length x width x height) Volume Gross weight 4052899245891 BA-DS-PL -865 Shipping carton box 5 440 mm x 310 mm x 207 mm 28.23 dm³ 8474.00 g The mentioned product code describes the smallest quantity unit which can be ordered. One shipping unit can contain one or more single products. When placing an order, for the quantity please enter single or multiples of a shipping unit. Accessories Mandatory Product description Accessory name Accessory code BA-DS-PL -865 BackLED DS Plus G15, -DS-MB 4008321872180 BA-DS-PL -865 BackLED DS Plus G15, -DS-MP 4008321872197 References / Links For more information on the multi-level guarantee and the terms and conditions of the guarantee visit www.osram.com/system-guarantee June 3, 2016, 20:56:30 BackLED DS Plus G15 © 2016, OSRAM GmbH. All rights reserved. Page 6 of 7 Product family datasheet Disclaimer Subject to change without notice. Errors and omission excepted. Always make sure to use the most recent release. __ June 3, 2016, 20:56:30 BackLED DS Plus G15 © 2016, OSRAM GmbH. All rights reserved. Page 7 of 7