Product Brief Mid-Range System Basis Chip Family Compliant to CAN FD TLE9260/61/62/63QX Key Features Infineon’s high integrated Mid Range System Basis Chip (SBC) family TLE9260/61/62/63QX offers best performance and scalability for various automotive applications. Up to three low-drop voltage regulators with 5V or 3.3V output voltage, one HS CAN and up to two LIN Transceivers complying with latest automotive standards and OEM requirements. The devices include diagnostic and supervision features to support ECU functional safety concepts, high-side outputs to drive external loads, wake-inputs and general purpose input-outputs (GPIOs) to monitor inputs or activate loads, very low quiescent current in low power modes with full wake-up capability. All devices feature an exposed pad VQFN-48 (7 x 7mm) power package (supporting AOI). The entire family is pin-to–pin and software compatible, also to other Infineon SBC families, and is designed to withstand the severe conditions of automotive applications. Integrated Low-Drop Voltage Regulator (5V or 3.3V up to 250mA) Integrated Low-Drop Voltage Regulator (5V up to 100mA) protected for off-board usage Voltage Regulator (5V or 3.3V) with external PNP transistor, protected for off-board usage or for load-sharing 1 High-Speed CAN Transceiver ISO 11898-2/-5: CAN Flexible Data-rate (CAN FD) compliant up to 2Mbit/s 1) 2 LIN Transceivers LIN2.2/J2602 4 High-Side Outputs 7Ω typ. 2 HV GPIOs, 3 HV Wake Inputs Interrupt, Reset Output Integrated Fail-Safe functions: 3 Fail-Safe Outputs, Watchdog, Fail-Safe operating modes 16-bit SPI for configuration and diagnostic Voltage, current and temperature protection and monitoring Key Benefits Low-drop voltage regulators for on- and off-board supply Flexible number of integrated LIN transceivers Very low quiescent current Very small leadless package supporting AOI Pin and software compatibility amongst all family members Wide supply input voltage and temperature range Reduced system cost through low component count and less PCB space Excellent EMC and ESD performance meeting major car OEM requirements Target Applications Body control modules and Gateway Climate control Seat control Door control and closures Light control modules Engine management systems www.infineon.com/sbc 1) The CAN FD requirements for Transceiver are not finalized. All statements regarding CAN FD are therefore based on Infineon’s today’s knowledge and expectation on the future CAN FD standard currently being worked out. See also: CAN FD compliant and CAN PN FD tolerant TLE9260/61/62/63-3QX family Product Brief Mid-Range System Basis Chip Family Compliant to CAN FD VBAT VBAT VS D1 C1 D7 VCC3 T1 R12 VCC C3 C2 Q1 IC1 Q2 GND TLE9263QX Application Diagram Q1 Q2 In this example: VCC1 to supply µC VCC2 to supply CAN transceiver VCC3 to supply additional on- or offboard loads (e.g. sensors) High-Side Switches to drive on- or offboards LEDs, relays or to supply monitored switches Wake Inputs to monitor the status of switches or of external signals (e.g. battery voltage) Fail Outputs to activate loads in failsafe mode conditions 1 HS CAN and 2 LIN transceivers VSHS VS C11 D5 HS2 VSHS Other loads, e.g. sensors, opamp, ... HS3 Logic State Machine VSHS HS4 R8 R7 S1 R6 WK2 VCAN VCC2 R12 LIN2 LIN1 C6 C7 CANH CANH CAN Cell D4 CSN VDD CLK MCU SDI SDO TxD LIN1 RxD LIN1 TxD LIN2 RxD LIN2 TxD CAN RxD CAN INT Reset Hall1 Hall2 VSS R1 WK3 R4 VS LIN2 C5 Q1 Q2 D3 LIN1 TLE9263QX R5 C4 VSHS WK1 S2 C9 VCC2 CSN CLK SDI SDO TxD LIN1 RxD LIN1 TxD LIN2 RxD LIN2 TxD CAN RxD CAN INT RO LIN Cell R9 VBAT S3 VCC1 VCC2 VS HS1 R11 VCC1 C10 D6 VCC3B VS VSHS VCC3REF R10 VCC3SH VSHS C13 R2 C 8 LIN Cell VS R3 CANL CANL C12 FOx T1 GND LH Family Overview TLE9260QX(V33) TLE9261QX(V33) TLE9262QX(V33) VCC3 LDO3 WK 1..3 State Machine SPI Wake Input WD HS 1..4 Limp Home HS VS VS LDO1 LDO2 CAN SPI INT RO LH WK 1..3 SPI Wake Input WD Limp Home HS VCC1 VS VCC2 VS TxD RxD CAN LDO3 State Machine HS 1..4 LDO1 LDO2 SPI INT RO LH WK 1..3 SPI Wake Input WD HS 1..4 Limp Home HS VCC1 VS VCC2 VS TxD RxD CAN Published by Infineon Technologies AG 85579 Neubiberg, Germany © 2013 Infineon Technologies AG. All Rights Reserved. Visit us: www.infineon.com Order Number: B127-H9769-G1-X-7600 Date: 09 / 2013 GND VCC3 LDO3 State Machine LDO1 LDO2 SPI INT RO LH VCC1 GND Attention please! The information given in this document shall in no event be regarded as a guarantee of conditions or characteristics (“Beschaffenheitsgarantie”). With respect to any examples or hints given herein, any typical values stated herein and/ or any information regarding the application of the device, Infineon Technologies hereby disclaims any and all warranties and liabilities of any kind, including without limitation warranties of non-infringement of intellectual property rights of any third party. Information For further information on technology, delivery terms and conditions and prices please contact your nearest Infineon Technologies Office (www.infineon.com). WK 1..3 State Machine SPI Wake Input WD HS Limp Home HS 1..4 VS VCC2 VS TxD RxD CAN TxD RxD LIN GND TLE9263QX(V33) VCC3 LDO1 LDO2 SPI INT RO LH VCC1 VCC2 TxD RxD LIN TxD RxD LIN TxD RxD GND Warnings Due to technical requirements components may contain dangerous substances. For information on the types in question please contact your nearest Infineon Technologies Office. Infineon Technologies Components may only be used in life-support devices or systems with the express written approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system, or to affect the safety or effectiveness of that device or system. Life support devices or systems are intended to be implanted in the human body, or to support and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may be endangered.