MC78FC00 D

MC78FC00 Series
Micropower Voltage
Regulator
The MC78FC00 series voltage regulators are specifically designed
for use as a power source for video instruments, handheld
communication equipment, and battery powered equipment.
The MC78FC00 series voltage regulator ICs feature a high accuracy
output voltage and ultra−low quiescent current. Each device contains a
voltage reference unit, an error amplifier, a driver transistor, and
resistors for setting output voltage, and a current limit circuit. These
devices are available in SOT−89 surface mount packages, and allow
construction of an efficient, constant voltage power supply circuit.
http://onsemi.com
MICROPOWER ULTRA−LOW
QUIESCENT CURRENT
VOLTAGE REGULATORS
Features
•
•
•
•
•
•
•
•
•
Ultra−Low Quiescent Current of 1.1 mA Typical
Ultra−Low Dropout Voltage (100 mV at 10 mA)
Large Output Current (up to 120 mA)
Excellent Line Regulation (0.1%)
Wide Operating Voltage Range (2.0 V to 10 V)
High Accuracy Output Voltage (±2.5%)
Wide Output Voltage Range (2.0 V to 6.0 V)
Surface Mount Package (SOT−89)
These are Pb−Free Devices
TAB
SOT−89
H SUFFIX
CASE 1213
1
MARKING DIAGRAM
X
X
T T
Vin
2
3
VO
X
T
= Device Code
= Traceability Information
PIN CONNECTIONS
Vref
1
Ground
1
Input
2
Tab
GND
Output
This device contains 11 active transistors.
(Tab is connected
to Pin 2)
3
(Top View)
Figure 1. Representative Block Diagram
STANDARD APPLICATION
Input
3
2
Output
MC78FCXX
Cin
*For additional information on our Pb−Free strategy and soldering details, please
download the ON Semiconductor Soldering and Mounting Techniques
Reference Manual, SOLDERRM/D.
© Semiconductor Components Industries, LLC, 2009
December, 2009 − Rev. 7
1
1
CO
ORDERING INFORMATION
See detailed ordering, marking, and shipping information on
page 4 of this data sheet.
Publication Order Number:
MC78FC00/D
MC78FC00 Series
MAXIMUM RATINGS (TC = 25°C, unless otherwise noted.)
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
ÁÁÁÁÁ
ÁÁÁÁÁÁÁÁ
ÁÁÁ
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
Rating
Symbol
Value
Unit
Input Voltage
VCC
10
Vdc
Power Dissipation and Thermal Characteristics Maximum Power Dissipation
Case 1213 (SOT−89) H Suffix
Thermal Resistance, Junction−to−Ambient
PD
RqJA
900
111
°C/W
Operating Junction Temperature
TJ
125
°C
Operating Ambient Temperature
TA
−30 to +80
°C
Storage Temperature Range
Tstg
−40 to +125
°C
mW
Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the
Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect
device reliability.
1. ESD data available upon request.
ELECTRICAL CHARACTERISTICS (Vin = VO + 1.0 V, IO = 10 mA, TJ = 25°C [Note 2], unless otherwise noted.)
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
ÁÁÁÁÁ
ÁÁÁ
ÁÁÁ
ÁÁÁÁ
ÁÁÁ
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
Characteristic
Symbol
Output Voltage
30HT1 Suffix (Vin = 5.0 V)
33HT1 Suffix (Vin = 6.0 V)
40HT1 Suffix (Vin = 7.0 V)
50HT1 Suffix (Vin = 8.0 V)
VO
Min
Typ
Max
2.925
3.218
3.900
4.875
3.0
3.3
4.0
5.0
3.075
3.382
4.100
5.125
Unit
V
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
ÁÁÁÁÁ
ÁÁÁ
ÁÁÁ
ÁÁÁÁ
ÁÁÁ
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
Line Regulation
Vin = [VO + 1.0] V to 10 V, IO = 10 mA
Regline
−
0.1
−
mV
Load Regulation
Vin = [VO + 1.0], IO = 1.0 to 10 mA
Regload
−
40
80
mV
50
65
65
80
80
100
100
120
−
−
−
−
−
0.5
0.7
−
−
−
−
1.1
1.1
1.2
1.3
3.3
3.3
3.6
3.9
−
±100
−
Output Current
30HT1 Suffix (Vin = 5.0 V)
33HT1 Suffix (Vin = 6.0 V)
40HT1 Suffix (Vin = 7.0 V)
50HT1 Suffix (Vin = 8.0 V)
IO
mA
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
ÁÁÁÁÁ
ÁÁÁ
ÁÁÁ
ÁÁÁÁ
ÁÁÁ
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
Dropout Voltage
IO = 40 mA
Vin − VO
Quiescent Current
30HT1 Suffix (Vin = 5.0 V)
33HT1 Suffix (Vin = 5.0 V)
40HT1 Suffix (Vin = 6.0 V)
50HT1 Suffix (Vin = 7.0 V)
ICC
Output Voltage Temperature Coefficient
TC
V
mA
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
ppm/°C
2. Low duty pulse techniques are used during test to maintain junction temperature as close to ambient as possible.
DEFINITIONS
Dropout Voltage − The input/output voltage differential at
which the regulator output no longer maintains regulation
against further reductions in input voltage. Measured when
the output drops 100 mV below its nominal value (which is
measured at 1.0 V differential), dropout voltage is affected
by junction temperature, load current and minimum input
supply requirements.
Line Regulation − The change in output voltage for a
change in input voltage. The measurement is made under
conditions of low dissipation or by using pulse techniques
such that average chip temperature is not significantly
affected.
Load Regulation − The change in output voltage for a
change in load current at constant chip temperature.
Maximum Power Dissipation − The maximum total device
dissipation for which the regulator will operate within
specifications.
Quiescent Bias Current − Current which is used to operate
the regulator chip and is not delivered to the load.
http://onsemi.com
2
MC78FC00 Series
0.8
V in -V O , DROPOUT VOLTAGE (V)
VO , OUTPUT VOLTAGE (V)
5.1
5.0
TA = -30°C
TA = 80°C
4.9
TA = 25°C
4.8
4.7
0
MC78FC50HT1
0
50
100
150
200
IO = 50 mA
0.6
0.4
IO = 10 mA
0.2
0
250
IO = 1.0 mA
0
1.0
2.0
3.0
4.0
5.0
6.0
IO, OUTPUT CURRENT (mA)
Vreg, SET OUTPUT VOLTAGE (V)
Figure 1. Output Voltage versus Output Current
Figure 2. Dropout versus Set Output Voltage
1.5
7.0
0.8
MC78FC50HT1
V in -V O , DROPOUT VOLTAGE (V)
MC78FC50HT1
1.3
1.1
0.9
0.7
0.5
-40
-20
0
20
40
60
80
100
0.6
TA = 80°C
0.4
TA = 25°C
TA = -30°C
0.2
0
0
120
20
40
60
80
100
TA, AMBIENT TEMPERATURE (°C)
IO, OUTPUT CURRENT (mA)
Figure 3. Quiescent Current versus Temperature
Figure 4. Dropout Voltage versus Output Current
INPUT VOLTAGE/OUTPUT VOLTAGE (V)
ICC, QUIESCENT CURRENT (mA)
MC78FC00 Series
TA = 25°C
9.0
8.0
Input Voltage
7.0
6.0
5.0
Output Voltage
4.0
3.0
2.0
1.0
0
0.5
1.0
1.5
2.0
2.5
t, TIME (ms)
3.0
Figure 5. Line Transient Response
http://onsemi.com
3
3.5
4.0
MC78FC00 Series
APPLICATIONS INFORMATION
Introduction
The MC78FC00 micropower voltage regulators are
specifically designed with internal current limiting and low
quiescent current making them ideal for battery powered
applications. An input bypass capacitor is recommended if
the regulator is located an appreciable distance (≥ 4 inches)
from the input voltage source. These regulators require
0.1 mF capacitance between the output terminal and ground
for stability. Most types of aluminum, tantalum or multilayer
ceramic will perform adequately. Solid tantalums or other
appropriate capacitors are recommended for operation
below 25°C. The bypass capacitors should be mounted with
the shortest possible leads or track lengths directly across the
regulator input and output terminals.
With economical electrolytic capacitors, cold temperature
operation can pose a serious stability problem. As the
electrolyte freezes, around −30°C, the capacitance will
decrease and the equivalent series resistance (ESR) will
increase drastically, causing the circuit to oscillate. Quality
electrolytic capacitors with extended temperature ranges of
−40° to +85°C are readily available. Solid tantalum
capacitors may be the better choice if small size is a
requirement. However, a maximum ESR limit of 3.0 W must
be observed over temperature to maintain stability.
Figure 6 is a typical circuit application. Figure 7 is a
current boost circuit which can deliver more than 600 mA.
The circuit has no current limiting and the external transistor
must be rated for the expected power dissipation.
2
Vin
3
VO
MC78FC00
0.1 mF
0.1 mF
1
GND
GND
Figure 6. Typical Application
MJD32C
.033 mF
2
Vin
MC78FC00
3
VO
100
10 mF
0.1 mF
1
0.1 mF
GND
GND
Figure 7. Current Boost Circuit
ORDERING INFORMATION
Device
Marking
Output
Voltage
MC78FC30HT1G
0K
3.0
MC78FC33HT1G
3K
3.3
MC78FC40HT1G
0L
4.0
MC78FC50HT1G
0M
5.0
Device
Operating
Temperature Range
Package
Shipping†
TA = −30° to +80°C
SOT−89
(Pb−Free)
1000 / Tape & Reel
†For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging
Specifications Brochure, BRD8011/D.
NOTE:
Other voltages from 2.0 to 6.0 V, in 0.1 V increments, are available upon request. Consult factory for information.
http://onsemi.com
4
MC78FC00 Series
PACKAGE DIMENSIONS
SOT−89 (3−LEAD)
H SUFFIX
PLASTIC PACKAGE
CASE 1213−02
ISSUE C
−A−
NOTES:
1. DIMENSIONING AND TOLERANCING PER ANSI
Y14.5M, 1982.
2. CONTROLLING DIMENSION: MILLIMETERS
3. 1213-01 OBSOLETE, NEW STANDARD 1213-02.
C
J
F
−B−
L
K
D
0.10
E
G
M
T B
S
A
S
−T−
SEATING
PLANE
2 PL
0.10
M
T B
S
A
S
DIM
A
B
C
D
E
F
G
H
J
K
L
MILLIMETERS
MIN
MAX
4.40
4.60
2.40
2.60
1.40
1.60
0.37
0.57
0.32
0.52
1.50
1.83
1.50 BSC
3.00 BSC
0.30
0.50
0.80
----4.25
INCHES
MIN
MAX
0.173
0.181
0.094
0.102
0.055
0.063
0.015
0.022
0.013
0.020
0.059
0.072
0.059 BSC
0.118 BSC
0.012
0.020
0.031
----0.167
H
ON Semiconductor and
are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice
to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
“Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All
operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights
nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications
intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should
Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates,
and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal
Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
P.O. Box 5163, Denver, Colorado 80217 USA
Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada
Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada
Email: [email protected]
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81−3−5773−3850
http://onsemi.com
5
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
For additional information, please contact your local
Sales Representative
MC78FC00/D