NL37WZ06 D

NL37WZ06
Triple Inverter with Open
Drain Outputs
The NL37WZ06 is a high performance triple inverter with open
drain outputs operating from a 1.65 to 5.5 V supply.
The internal circuit is composed of multiple stages, including an
open drain output which provides the capability to set output
switching level. This allows the NL37WZ06 to be used to interface 5
V circuits to circuits of any voltage between VCC and 7 V using an
external resistor and power supply.
•
•
•
•
•
MARKING
DIAGRAM
8
8
Features
•
•
•
•
http://onsemi.com
Extremely High Speed: tPD 2.5 ns (typical) at VCC = 5 V
Designed for 1.65 V to 5.5 V VCC Operation
Over Voltage Tolerant Inputs
LVTTL Compatible − Interface Capability with 5 V TTL Logic with
VCC = 3 V
LVCMOS Compatible
24 mA Output Sink Capability @ 3.0 V
Near Zero Static Supply Current Substantially Reduces System
Power Requirements
Chip Complexity: FET = 72
These Devices are Pb−Free and are RoHS Compliant
1
LF M G
G
US8
US SUFFIX
CASE 493
1
LF
M
G
= Device Code
= Date Code*
= Pb−Free Package
(Note: Microdot may be in either location)
*Date Code orientation may vary depending upon
manufacturing location.
PIN ASSIGNMENT
IN A1
OUT Y3
IN A2
GND
1
8
2
7
3
6
4
5
1
VCC
OUT Y1
IN A3
IN A1
2
OUT Y3
3
IN A2
4
GND
5
OUT Y2
6
IN A3
7
OUT Y1
8
VCC
OUT Y2
FUNCTION TABLE
A Input
Figure 1. Pinout (Top View)
L
H
Y Output
Z
L
IN A1
1
OUT Y1
IN A2
1
OUT Y2
ORDERING INFORMATION
IN A3
1
OUT Y3
See detailed ordering and shipping information in the package
dimensions section on page 4 of this data sheet.
Figure 2. Logic Symbol
© Semiconductor Components Industries, LLC, 2012
April, 2012 − Rev. 6
1
Publication Order Number:
NL37WZ06/D
NL37WZ06
MAXIMUM RATINGS
Symbol
Parameter
Value
Unit
VCC
DC Supply Voltage
−0.5 to +7.0
V
VI
DC Input Voltage
−0.5 to )7.0
V
VO
DC Output Voltage
−0.5 to )7.0
V
IIK
DC Input Diode Current
VI < GND
−50
mA
IOK
DC Output Diode Current
VO < GND
−50
mA
IO
DC Output Sink Current
$50
mA
ICC
DC Supply Current per Supply Pin
$100
mA
IGND
DC Ground Current per Ground Pin
$100
mA
TSTG
Storage Temperature Range
−65 to +150
°C
TL
Lead Temperature, 1 mm from Case for 10 Seconds
260
°C
TJ
Junction Temperature under Bias
+150
°C
qJA
Thermal Resistance
250
°C/W
PD
Power Dissipation in Still Air at 85°C
250
mW
MSL
Moisture Sensitivity
FR
Flammability Rating
VESD
ESD Withstand Voltage
(Note 1)
Level 1
Oxygen Index: 28 to 34
UL 94 V−0 @ 0.125 in
Human Body Model (Note 2)
Machine Model (Note 3)
Charged Device Model (Note 4)
> 2000
> 200
N/A
V
Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the
Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect
device reliability.
1. Measured with minimum pad spacing on an FR4 board, using 10 mm−by−1 inch, 2−ounce copper trace with no air flow.
2. Tested to EIA/JESD22−A114−A.
3. Tested to EIA/JESD22−A115−A.
4. Tested to JESD22−C101−A.
RECOMMENDED OPERATING CONDITIONS
Symbol
Parameter
VCC
Supply Voltage
VI
Input Voltage
VO
Output Voltage
TA
Operating Free−Air Temperature
Dt/DV
Input Transition Rise or Fall Rate
Min
Max
Unit
1.65
1.5
5.5
5.5
V
(Note 5)
0
5.5
V
(HIGH or LOW State)
0
5.5
V
−55
+125
°C
0
0
0
20
10
5
ns/V
Operating
Data Retention Only
VCC = 2.5 V $0.2 V
VCC = 3.0 V $0.3 V
VCC = 5.0 V $0.5 V
5. Unused inputs may not be left open. All inputs must be tied to a high− or low−logic input voltage level.
http://onsemi.com
2
NL37WZ06
DC ELECTRICAL CHARACTERISTICS
TA = 25°C
VCC
Symbol
Parameter
Condition
(V)
Min
0.75 VCC
0.7 VCC
−55°C ≤ TA ≤ 125°C
Typ
Max
Min
Max
High−Level Input Voltage
1.65
2.3 to 5.5
VIL
Low−Level Input Voltage
1.65
2.3 to 5.5
0.25 VCC
0.3 VCC
0.25 VCC
0.3 VCC
V
ILKG
Z−State Output
Leakage Current
VIN = VIL
VOUT = VCC or GND
1.65 to 5.5
±5.0
±10.0
mA
VOL
Low−Level Output
Voltage
VIN = VIH or VIL
IOL = 100 mA
1.65 to 5.5
0.1
0.1
V
IOL = 4 mA
1.65
0.45
0.45
IIN
Input Leakage Current
IOFF
Power Off
Leakage Current
ICC
Quiescent Supply Current
0.75 VCC
0.7 VCC
Unit
VIH
V
IOL = 8 mA
2.3
0.22
0.3
0.3
IOL = 12 mA
2.7
0.22
0.4
0.4
IOL = 16 mA
3.0
0.28
0.4
0.4
IOL = 24 mA
3.0
0.38
0.55
0.55
IOL = 32 mA
4.5
0.42
0.55
0.55
VIN = 5.5 V or GND
0 to 5.5
±0.1
±1.0
mA
VIN = 5.5 V or
VOUT = 5.5 V
0
1.0
10
mA
VIN = 5.5 V or GND
5.5
1.0
10
mA
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
ÎÎÎÎÎÎ
ÎÎÎÎÎÎ
ÎÎÎÎÎÎÎÎ
ÎÎÎÎÎÎ
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
ÎÎÎÎ
ÎÎÎÎÎÎÎ
ÎÎ
ÎÎÎÎÎÎÎÎÎ
ÎÎÎÎ
ÎÎÎ
ÎÎÎ
ÎÎ
ÎÎÎ
ÎÎÎÎ
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
ÎÎÎÎ
ÎÎÎÎÎÎÎ
ÎÎÎÎÎÎÎÎÎ
ÎÎÎÎ
ÎÎÎ
ÎÎÎ
ÎÎ
ÎÎÎ
ÎÎÎÎ
ÎÎ
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
ÎÎÎÎ
ÎÎÎÎÎÎÎ
ÎÎ
ÎÎÎÎÎÎÎÎÎ
ÎÎÎÎ
ÎÎÎ
ÎÎÎ
ÎÎ
ÎÎÎ
ÎÎÎÎ
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
AC ELECTRICAL CHARACTERISTICS tR = tF = 2.5 ns; CL = 50 pF; RL = 500 W
TA = 25°C
Symbol
tPZL
tPLZ
Parameter
Propagation Delay
(Figure 3 and 4)
Propagation Delay
(Figure 3 and 4)
Min
Typ
−55°C ≤ TA ≤ 125°C
Max
Min
Max
Unit
7.2
ns
Condition
VCC (V)
RL = R1= 500 W, CL = 50 pF
1.8 ± 0.15
RL = R1= 500 W, CL = 50 pF
2.5 ± 0.2
0.8
3.0
4.0
0.8
4.1
RL = R1= 500 W, CL = 50 pF
3.3 ± 0.3
0.8
2.4
3.2
0.8
3.7
RL = R1= 500 W, CL = 50 pF
5.0 ± 0.5
0.5
2.4
3.0
0.5
3.5
RL = R1= 500 W, CL = 50 pF
1.8 ± 0.15
RL = R1= 500 W, CL = 50 pF
2.5 ± 0.2
0.8
2.5
4.0
0.8
4.1
RL = R1= 500 W, CL = 50 pF
3.3 ± 0.3
0.8
2.1
3.2
0.8
3.7
RL = R1= 500 W, CL = 50 pF
5.0 ± 0.5
0.5
1.2
3.0
0.5
3.5
7.2
7.2
7.2
ns
CAPACITIVE CHARACTERISTICS
Symbol
Parameter
Condition
Typical
Unit
CIN
Input Capacitance
VCC = 5.5 V, VI = 0 V or VCC
2.5
pF
COUT
Output Capacitance
VCC = 5.5 V, VI = 0 V or VCC
4.0
pF
CPD
Power Dissipation Capacitance (Note 6)
10 MHz, VCC = 5.5 V, VI = 0 V or VCC
4.0
pF
6. CPD is defined as the value of the internal equivalent capacitance which is calculated from the operating current consumption without load.
Average operating current can be obtained by the equation: ICC(OPR) = CPD VCC fin + ICC. CPD is used to determine the no−load dynamic
power consumption; PD = CPD VCC2 fin + ICC VCC.
http://onsemi.com
3
NL37WZ06
A
VCC
50%
tPZL
Y
GND
tPLZ
50% VCC
HIGH
IMPEDANCE
VOL +0.3 V
Figure 3. Switching Waveforms
VCC
R1
PULSE
GENERATOR
DUT
RT
CL
VCC x 2
RL
RT = ZOUT of pulse generator (typically 50 W)
Figure 4. Test Circuit
DEVICE ORDERING INFORMATION
Device Order Number
NL37WZ06USG
Package
Shipping†
US8
(Pb−Free)
3000 / Tape & Reel
†For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging
Specifications Brochure, BRD8011/D.
http://onsemi.com
4
NL37WZ06
PACKAGE DIMENSIONS
US8
US SUFFIX
CASE 493−02
ISSUE B
−X−
A
8
−Y−
5
NOTES:
1. DIMENSIONING AND TOLERANCING PER
ANSI Y14.5M, 1982.
2. CONTROLLING DIMENSION: MILLIMETERS.
3. DIMENSION “A” DOES NOT INCLUDE MOLD
FLASH, PROTRUSION OR GATE BURR.
MOLD FLASH. PROTRUSION AND GATE
BURR SHALL NOT EXCEED 0.140 MM
(0.0055”) PER SIDE.
4. DIMENSION “B” DOES NOT INCLUDE
INTER−LEAD FLASH OR PROTRUSION.
INTER−LEAD FLASH AND PROTRUSION
SHALL NOT E3XCEED 0.140 (0.0055”) PER
SIDE.
5. LEAD FINISH IS SOLDER PLATING WITH
THICKNESS OF 0.0076−0.0203 MM.
(300−800 “).
6. ALL TOLERANCE UNLESS OTHERWISE
SPECIFIED ±0.0508 (0.0002 “).
J
DETAIL E
B
L
1
4
R
G
P
S
U
C
−T−
SEATING
PLANE
D
0.10 (0.004)
M
H
0.10 (0.004) T
K
N
R 0.10 TYP
T X Y
V
M
F
DETAIL E
SOLDERING FOOTPRINT*
DIM
A
B
C
D
F
G
H
J
K
L
M
N
P
R
S
U
V
MILLIMETERS
MIN
MAX
1.90
2.10
2.20
2.40
0.60
0.90
0.17
0.25
0.20
0.35
0.50 BSC
0.40 REF
0.10
0.18
0.00
0.10
3.00
3.20
0_
6_
5_
10 _
0.23
0.34
0.23
0.33
0.37
0.47
0.60
0.80
0.12 BSC
INCHES
MIN
MAX
0.075
0.083
0.087
0.094
0.024
0.035
0.007
0.010
0.008
0.014
0.020 BSC
0.016 REF
0.004
0.007
0.000
0.004
0.118
0.126
0_
6_
5_
10 _
0.010
0.013
0.009
0.013
0.015
0.019
0.024
0.031
0.005 BSC
3.8
0.15
0.50
0.0197
1.8
0.07
0.30
0.012
1.0
0.0394
SCALE 8:1
mm Ǔ
ǒinches
*For additional information on our Pb−Free strategy
and soldering details, please download the
ON Semiconductor Soldering and Mounting
Techniques Reference Manual, SOLDERRM/D.
ON Semiconductor and
are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice
to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
“Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All
operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights
nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications
intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer
purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates,
and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal
Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
P.O. Box 5163, Denver, Colorado 80217 USA
Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada
Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada
Email: [email protected]
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81−3−5817−1050
http://onsemi.com
5
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
For additional information, please contact your local
Sales Representative
NL37WZ06/D