NL37WZ07 Triple Buffer with Open Drain Outputs The NL37WZ07 is a high performance triple buffer with open drain outputs operating from a 1.65 V to 5.5 V supply. The internal circuit is composed of multiple stages, including an open drain output which provides the capability to set output switching level. This allows the NL37WZ07 to be used to interface 5 V circuits to circuits of any voltage between VCC and 7 V using an external resistor and power supply. • • • • • • • • Extremely High Speed: tPD 2.5 ns (typical) at VCC = 5 V Designed for 1.65 V to 5.5 V VCC Operation Over Voltage Tolerant Inputs LVTTL Compatible − Interface Capability with 5 V TTL Logic with VCC = 3 V LVCMOS Compatible 24 mA Output Sink Capability @ 3.0 V Near Zero Static Supply Current Substantially Reduces System Power Requirements Chip Complexity: FET = 72 http://onsemi.com MARKING DIAGRAM 8 8 1 L7 US8 US SUFFIX CASE 493 D 1 L7 = Device Code D = Date Code PIN ASSIGNMENT IN A1 1 IN A1 OUT Y3 IN A2 GND 1 8 2 7 3 6 4 5 VCC 2 OUT Y3 3 IN A2 4 GND 5 OUT Y2 OUT Y1 IN A3 6 IN A3 7 OUT Y1 8 VCC OUT Y2 FUNCTION TABLE Figure 1. Pinout A Input IN A1 1 OUT Y1 IN A2 1 OUT Y2 IN A3 1 OUT Y3 L H August, 2003 − Rev. 2 L Z ORDERING INFORMATION See detailed ordering and shipping information in the package dimensions section on page 4 of this data sheet. Figure 2. Logic Symbol Semiconductor Components Industries, LLC, 2003 Y Output 1 Publication Order Number: NL37WZ07/D NL37WZ07 MAXIMUM RATINGS Symbol Parameter Value Unit VCC DC Supply Voltage 0.5 to 7.0 V VI DC Input Voltage 0.5 to 7.0 V VO DC Output Voltage 0.5 to 7.0 V IIK DC Input Diode Current VI < GND 50 mA IOK DC Output Diode Current VO < GND 50 mA IO DC Output Sink Current 50 mA ICC DC Supply Current per Supply Pin 100 mA IGND DC Ground Current per Ground Pin 100 mA TSTG Storage Temperature Range 65 to 150 °C TL Lead Temperature, 1 mm from Case for 10 Seconds TJ Junction Temperature under Bias JA Thermal Resistance PD Power Dissipation in Still Air at 85°C MSL Moisture Sensitivity FR Flammability Rating VESD ESD Withstand Voltage (Note 1) 260 °C 150 °C 250 °C/W 250 mW Level 1 Oxygen Index: 28 to 34 UL 94 V−0 @ 0.125 in Human Body Model (Note 2) Machine Model (Note 3) Charged Device Model (Note 4) > 2000 > 150 N/A V Maximum Ratings are those values beyond which damage to the device may occur. Exposure to these conditions or conditions beyond those indicated may adversely affect device reliability. Functional operation under absolute maximum−rated conditions is not implied. Functional operation should be restricted to the Recommended Operating Conditions. 1. Measured with minimum pad spacing on an FR4 board, using 10 mm−by−1 inch, 2−ounce copper trace with no air flow. 2. Tested to EIA/JESD22−A114−A. 3. Tested to EIA/JESD22−A115−A. 4. Tested to JESD22−C101−A. RECOMMENDED OPERATING CONDITIONS Symbol Parameter VCC Supply Voltage VI Input Voltage VO Output Voltage TA Operating Free−Air Temperature t/V Input Transition Rise or Fall Rate Min Max Unit 1.65 1.5 5.5 5.5 V (Note 5) 0 5.5 V (HIGH or LOW State) 0 VCC V −40 +85 °C 0 0 0 20 10 5 ns/V Operating Data Retention Only VCC = 2.5 V 0.2 V VCC = 3.0 V 0.3 V VCC = 5.0 V 0.5 V 5. Unused inputs may not be left open. All inputs must be tied to a high− or low−logic input voltage level. http://onsemi.com 2 NL37WZ07 DC ELECTRICAL CHARACTERISTICS VCC Symbol Parameter Condition 40°C ≤TA ≤ 85°C TA = 25°C (V) Min 0.7 VCC 0.7 VCC Typ Max Min Max VIH High−Level Input Voltage 1.65 to 1.95 2.3 to 5.5 VIL Low−Level Input Voltage 1.65 to 1.95 2.3 to 5.5 0.25 VCC 0.3 VCC 0.25 VCC 0.3 VCC V ILKG Z−State Output Leakage Current VIN = VIL VOUT = VCC or GND 1.65 to 5.5 5.0 10.0 A VOL Low−Level Output Voltage VIN = VIH or VIL IOL = 100 A 1.65 to 5.5 0.0 0.1 0.1 V IOL = 4 mA 1.65 0.08 0.24 0.24 IOL = 8 mA 2.3 0.20 0.3 0.3 IOL = 12 mA 2.7 0.22 0.4 0.4 IOL = 16 mA 3.0 0.28 0.4 0.4 IOL = 24 mA 3.0 0.38 0.55 0.55 IOL = 32 mA 4.5 0.42 0.55 0.55 VIN or VOUT = VCC or GND 0 to 5.5 0.1 1.0 A VOUT = 5.5 V 0 1 10 A VIN = VCC or GND 5.5 1 10 A IIN Input Leakage Current IOFF Power Off−Output Leakage Current ICC Quiescent Supply Current 0.7 VCC 0.7 VCC Unit V ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎ ÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎ ÎÎÎÎ ÎÎÎÎÎÎÎ ÎÎÎÎÎÎ ÎÎ ÎÎÎÎ ÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎ ÎÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎÎ ÎÎ ÎÎÎÎÎÎÎ ÎÎÎÎÎÎ ÎÎÎÎ ÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎ ÎÎÎÎ Î ÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎÎ ÎÎ ÎÎÎ ÎÎÎÎ ÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎ ÎÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎÎ ÎÎ ÎÎÎÎ ÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎ ÎÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎÎ ÎÎ ÎÎÎÎ ÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎ ÎÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎÎ ÎÎ ÎÎÎÎ ÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎ ÎÎÎÎ Î ÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎÎ ÎÎ ÎÎÎ ÎÎÎÎ ÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎ ÎÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎÎ ÎÎ ÎÎÎÎ ÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎ ÎÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎÎ ÎÎ ÎÎÎÎ ÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎ ÎÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎÎ ÎÎ ÎÎÎÎ ÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎ ÎÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎ ÎÎÎÎ ÎÎ AC ELECTRICAL CHARACTERISTICS tR = tF = 2.5 ns; CL = 50 pF; RL = 500 40°C ≤TA ≤ 85°C TA = 25°C Symbol tPZL tPLZ Parameter Propagation Delay ( (Figure 3 and 4)) Propagation Delay ( (Figure 3 and 4)) Min Typ Max Min Max Unit 7.8 ns Condition VCC (V) RL = R1= 500 CL = 50 pF 1.8 0.15 RL = R1= 500 CL = 50 pF 2.5 0.2 1.2 3.7 5.8 1.2 6.4 RL = R1= 500 CL = 50 pF 3.3 0.3 0.8 2.9 4.4 0.8 4.8 RL = R1= 500 CL = 50 pF 5.0 0.5 0.5 2.3 3.5 0.5 3.9 RL = R1= 500 CL = 50 pF 1.8 0.15 RL = R1= 500 CL = 50 pF 2.5 0.2 1.2 2.8 5.8 1.2 6.4 RL = R1= 500 CL = 50 pF 3.3 0.3 0.8 2.1 4.4 0.8 4.8 RL = R1= 500 CL = 50 pF 5.0 0.5 0.5 1.4 3.5 0.5 3.9 7.8 7.8 7.8 ns CAPACITIVE CHARACTERISTICS Symbol Parameter Condition Typical Unit CIN Input Capacitance VCC = 5.5 V, VI = 0 V or VCC 2.5 pF COUT Output Capacitance VCC = 5.5 V, VI = 0 V or VCC 4.0 pF CPD Power Dissipation Capacitance (Note 6) 10 MHz, VCC = 5.5 V, VI = 0 V or VCC 4.0 pF 6. CPD is defined as the value of the internal equivalent capacitance which is calculated from the operating current consumption without load. Average operating current can be obtained by the equation: ICC(OPR) = CPD VCC fin ICC. CPD is used to determine the no−load dynamic power consumption; PD = CPD VCC2 fin ICC VCC. http://onsemi.com 3 NL37WZ07 VCC A 50% GND tPZL tPLZ HIGH IMPEDANCE 50% VCC Y VOL +0.3 V Figure 3. Switching Waveforms VCC R1 PULSE GENERATOR VCC x 2 DUT RT CL RL RT = ZOUT of pulse generator (typically 50 ) Figure 4. Test Circuit DEVICE ORDERING INFORMATION Device Nomenclature Device Order Number NL37WZ07US Logic Circuit Indicator No. of Gates per Package Temp Range Identifier Technology Device Function Package Suffix Package Type Tape and Reel Size NL 3 7 WZ 07 US US8 178 mm (7″) 3000 Unit http://onsemi.com 4 NL37WZ07 CAVITY TAPE TOP TAPE TAPE TRAILER (Connected to Reel Hub) NO COMPONENTS 160 mm MIN COMPONENTS TAPE LEADER NO COMPONENTS 400 mm MIN DIRECTION OF FEED Figure 5. Tape Ends for Finished Goods TAPE DIMENSIONS mm 4.00 1.50 TYP 4.00 2.00 1.75 3.50 0.25 0.30 8.00 + − 0.10 1 1.00 ± 0.25 TYP DIRECTION OF FEED Figure 6. US8 Reel Configuration/Orientation http://onsemi.com 5 NL37WZ07 t MAX 1.5 mm MIN (0.06 in) A 13.0 mm 0.2 mm (0.512 in 0.008 in) 50 mm MIN (1.969 in) 20.2 mm MIN (0.795 in) FULL RADIUS G Figure 7. Reel Dimensions REEL DIMENSIONS Tape Size T and R Suffix A Max G t Max 8 mm US 178 mm (7 in) 8.4 mm, + 1.5 mm, −0.0 (0.33 in + 0.059 in, −0.00) 14.4 mm (0.56 in) DIRECTION OF FEED BARCODE LABEL POCKET Figure 8. Reel Winding Direction http://onsemi.com 6 HOLE NL37WZ07 PACKAGE DIMENSIONS US8 US SUFFIX CASE 493−02 ISSUE A NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: MILLIMETERS. 3. DIMENSION “A” DOES NOT INCLUDE MOLD FLASH, PROTRUSION OR GATE BURR. MOLD FLASH. PROTRUSION AND GATE BURR SHALL NOT EXCEED 0.140 MM (0.0055”) PER SIDE. 4. DIMENSION “B” DOES NOT INCLUDE INTER−LEAD FLASH OR PROTRUSION. INTER−LEAD FLASH AND PROTRUSION SHALL NOT E3XCEED 0.140 (0.0055”) PER SIDE. 5. LEAD FINISH IS SOLDER PLATING WITH THICKNESS OF 0.0076−0.0203 MM. (300−800 “). 6. ALL TOLERANCE UNLESS OTHERWISE SPECIFIED ±0.0508 (0.0002 “). −X− A 8 J −Y− 5 DETAIL E B L 1 4 R S G P U C −T− SEATING PLANE D H 0.10 (0.004) T K N 0.10 (0.004) M T X Y R 0.10 TYP V M F DETAIL E 3.8 0.5 TYP ÉÉÉ ÉÉÉ ÉÉÉ ÉÉÉ ÉÉÉ ÉÉÉ ÉÉÉ ÉÉÉ ÉÉÉ ÉÉÉ 1.8 TYP 1.0 http://onsemi.com 7 0.3 TYP (mm) DIM A B C D F G H J K L M N P R S U V MILLIMETERS MIN MAX 1.90 2.10 2.20 2.40 0.60 0.90 0.17 0.25 0.20 0.35 0.50 BSC 0.40 REF 0.10 0.18 0.00 0.10 3.00 3.20 0 6 5 10 0.23 0.34 0.23 0.33 0.37 0.47 0.60 0.80 0.12 BSC INCHES MIN MAX 0.075 0.083 0.087 0.094 0.024 0.035 0.007 0.010 0.008 0.014 0.020 BSC 0.016 REF 0.004 0.007 0.000 0.004 0.118 0.126 0 6 5 10 0.010 0.013 0.009 0.013 0.015 0.019 0.024 0.031 0.005 BSC NL37WZ07 ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. PUBLICATION ORDERING INFORMATION Literature Fulfillment: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada Email: [email protected] JAPAN: ON Semiconductor, Japan Customer Focus Center 2−9−1 Kamimeguro, Meguro−ku, Tokyo, Japan 153−0051 Phone: 81−3−5773−3850 ON Semiconductor Website: http://onsemi.com For additional information, please contact your local Sales Representative. N. American Technical Support: 800−282−9855 Toll Free USA/Canada http://onsemi.com 8 NL37WZ07/D