V30120S, VI30120S Datasheet

V30120S, VI30120S
www.vishay.com
Vishay General Semiconductor
High Voltage Trench MOS Barrier Schottky Rectifier
Ultra Low VF = 0.43 V at IF = 5 A
FEATURES
TMBS
®
• Trench MOS Schottky technology
TO-220AB
• Low forward voltage drop, low power losses
TO-262AA
• High efficiency operation
K
• Solder dip 275 °C max. 10 s, per JESD 22-B106
• AEC-Q101 qualified
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
2
3
1
1
V30120S
PIN 1
PIN 2
PIN 3
CASE
2
3
TYPICAL APPLICATIONS
VI30120S
PIN 1
PIN 2
PIN 3
K
For use in high frequency DC/DC converters, switching
power supplies, freewheeling diodes, OR-ing diode, and
reverse battery protection.
MECHANICAL DATA
Case: TO-220AB and TO-262AA
Molding compound meets UL 94 V-0 flammability rating
Base P/N-M3 - halogen-free, RoHS-compliant, and
commercial grade
Base P/NHM3 - halogen-free, RoHS-compliant, and
AEC-Q101 qualified
PRIMARY CHARACTERISTICS
IF(AV)
30 A
VRRM
120 V
IFSM
300 A
VF at IF = 30 A
0.74 V
TJ max.
150 °C
Package
TO-220AB, TO-262AA
Diode variation
Single
Terminals: Matte tin plated leads, solderable per
J-STD-002 and JESD 22-B102
M3 suffix meets JESD 201 class 1A whisker test, HM3 suffix
meets JESD 201 class 2 whisker test
Polarity: As marked
Mounting Torque: 10 in-lbs max.
MAXIMUM RATINGS (TA = 25 °C unless otherwise noted)
PARAMETER
SYMBOL
V30120S
VI30120S
UNIT
Max. repetitive peak reverse voltage
VRRM
120
V
Max. average forward rectified current (fig. 1)
IF(AV)
30
A
Peak forward surge current 8.3 ms single half sine-wave
superimposed on rated load
IFSM
300
A
dV/dt
10 000
V/μs
TJ, TSTG
-40 to +150
°C
Voltage rate of change (rated VR)
Operating junction and storage temperature range
Revision: 11-May-16
Document Number: 89152
1
For technical questions within your region: [email protected], [email protected], [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
V30120S, VI30120S
www.vishay.com
Vishay General Semiconductor
ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)
PARAMETER
TEST CONDITIONS
SYMBOL
IF = 5 A
IF = 15 A
Instantaneous forward voltage
TA = 25 °C
IF = 30 A
VF (1)
IF = 5 A
TA = 125 °C
IF = 15 A
IF = 30 A
VR = 90 V
Reverse current
VR = 120 V
TYP.
MAX.
0.50
-
0.70
-
0.99
1.10
0.43
-
0.60
-
0.74
0.82
UNIT
V
TA = 25 °C
18
-
μA
TA = 125 °C
12
-
mA
TA = 25 °C
IR (2)
TA = 125 °C
-
500
μA
22
35
mA
V30120S
VI30120S
UNIT
Notes
(1) Pulse test: 300 μs pulse width, 1 % duty cycle
(2) Pulse test: Pulse width  40 ms
THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)
PARAMETER
SYMBOL
Typical thermal resistance
RJC
1.6
°C/W
ORDERING INFORMATION (Example)
PACKAGE
PREFERRED P/N
UNIT WEIGHT (g)
PACKAGE CODE
BASE QUANTITY
DELIVERY MODE
TO-220AB
V30120S-M3/4W
1.88
4W
50/tube
Tube
TO-262AA
VI30120S-M3/4W
1.45
4W
50/tube
Tube
TO-220AB
V30120SHM3/4W (1)
1.88
4W
50/tube
Tube
TO-262AA
VI30120SHM3/4W (1)
1.45
4W
50/tube
Tube
Note
(1) AEC-Q101 qualified
Revision: 11-May-16
Document Number: 89152
2
For technical questions within your region: [email protected], [email protected], [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
V30120S, VI30120S
www.vishay.com
Vishay General Semiconductor
RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted)
100
Resistive or Inductive Load
Instantaneous Reverse Current (mA)
Average Forward Rectified Current (A)
40
35
30
25
20
15
10
5
Mounted on Specific Heatsink
0
25
50
75
100
125
150
TA = 100 °C
1
0.1
TA = 25 °C
0.01
175
10
20
30
40
50
60
70
80
90
Case Temperature (°C)
Percent of Rated Peak Reverse Voltage (%)
Fig. 1 - Forward Current Derating Curve
Fig. 4 - Typical Reverse Characteristics
30
100
10 000
D = 0.5
TJ = 25 °C
f = 1.0 MHz
Vsig = 50 mVp-p
D = 0.8
Junction Capacitance (pF)
25
Average Power Loss (W)
TA = 125 °C
10
0.001
0
D = 0.3
20
D = 0.2
15
D = 1.0
D = 0.1
T
10
5
D = tp/T
1000
100
tp
10
0
0
5
10
20
15
25
30
0.1
35
1
10
100
Average Forward Current (A)
Reverse Voltage (V)
Fig. 2 - Forward Power Loss Characteristics
Fig. 5 - Typical Junction Capacitance
10
Transient Thermal Impedance (°C/W)
100
Instantaneous Forward Current (A)
TA = 150 °C
TA = 150 °C
TA = 125 °C
10
TA = 100 °C
1
TA = 25 °C
0.1
0
0.2
0.4
0.6
0.8
1.0
1.2
1.4
Junction to Case
1
0.1
0.01
0.1
1
10
100
Instantaneous Forward Voltage (V)
t - Pulse Duration (s)
Fig. 3 - Typical Instantaneous Forward Characteristics
Fig. 6 - Typical Transient Thermal Impedance
Revision: 11-May-16
Document Number: 89152
3
For technical questions within your region: [email protected], [email protected], [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
V30120S, VI30120S
www.vishay.com
Vishay General Semiconductor
PACKAGE OUTLINE DIMENSIONS in inches (millimeters)
TO-220AB
0.415 (10.54)
0.380 (9.65)
0.185 (4.70)
0.175 (4.44)
0.161 (4.08)
0.139 (3.53)
0.055 (1.39)
0.045 (1.14)
0.113 (2.87)
0.103 (2.62)
1
0.635 (16.13)
0.625 (15.87)
PIN
2
3
0.160 (4.06)
0.140 (3.56)
0.603 (15.32)
0.573 (14.55)
0.350 (8.89)
0.330 (8.38)
1.148 (29.16)
1.118 (28.40)
0.110 (2.79)
0.100 (2.54)
0.057 (1.45)
0.045 (1.14)
0.560 (14.22)
0.530 (13.46)
0.035 (0.90)
0.028 (0.70)
0.104 (2.65)
0.096 (2.45)
0.205 (5.20)
0.195 (4.95)
0.022 (0.56)
0.014 (0.36)
TO-262AA
0.185 (4.70)
0.175 (4.44)
0.411 (10.45) MAX.
30° (TYP.)
(REF.)
0.250 (6.35) MIN.
0.055 (1.40)
0.047 (1.19)
0.055 (1.40)
0.045 (1.14)
K
0.950 (24.13)
0.920 (23.37)
1
PIN
2
0.510 (12.95)
0.470 (11.94)
0.350 (8.89)
0.330 (8.38)
3
0.160 (4.06)
0.140 (3.56)
0.110 (2.79)
0.100 (2.54)
0.057 (1.45)
0.045 (1.14)
0.104 (2.65)
0.096 (2.45)
0.401 (10.19)
0.381 (9.68)
0.560 (14.22)
0.530 (13.46)
0.035 (0.90)
0.028 (0.70)
0.022 (0.56)
0.014 (0.35)
0.205 (5.20)
0.195 (4.95)
Revision: 11-May-16
Document Number: 89152
4
For technical questions within your region: [email protected], [email protected], [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free
requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference
to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21
conform to JEDEC JS709A standards.
Revision: 02-Oct-12
1
Document Number: 91000