New Product V30120S, VI30120S Vishay General Semiconductor High-Voltage Trench MOS Barrier Schottky Rectifier Ultra Low VF = 0.43 V at IF = 5 A FEATURES TMBS ® • Trench MOS Schottky technology TO-220AB • Low forward voltage drop, low power losses TO-262AA • High efficiency operation K • Solder dip 275 °C max. 10 s, per JESD 22-B106 • AEC-Q101 qualified • Compliant to RoHS Directive 2002/95/EC and in accordance to WEEE 2002/96/EC 2 PIN 2 CASE PIN 3 1 1 V30120S PIN 1 3 2 3 • Halogen-free according to IEC 61249-2-21 definition VI30120S PIN 1 PIN 2 PIN 3 K TYPICAL APPLICATIONS For use in high frequency DC/DC converters, switching power supplies, freewheeling diodes, OR-ing diode, and reverse battery protection. MECHANICAL DATA PRIMARY CHARACTERISTICS IF(AV) 30 A VRRM 120 V IFSM 300 A VF at IF = 30 A 0.74 V TJ max. 150 °C Case: TO-220AB and TO-262AA Molding compound meets UL 94 V-0 flammability rating Base P/N-M3 - halogen-free, RoHS compliant, and commercial grade Base P/NHM3 - halogen-free, RoHS compliant, and AEC-Q101 qualified Terminals: Matte tin plated leads, solderable per J-STD-002 and JESD 22-B102 M3 suffix meets JESD 201 class 1A whisker test, HM3 suffix meets JESD 201 class 2 whisker test Polarity: As marked Mounting Torque: 10 in-lbs maximum MAXIMUM RATINGS (TA = 25 °C unless otherwise noted) PARAMETER SYMBOL V30120S VI30120S UNIT Maximum repetitive peak reverse voltage VRRM 120 V Maximum average forward rectified current (fig. 1) IF(AV) 30 A Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load IFSM 300 A dV/dt 10 000 V/μs TJ, TSTG - 40 to + 150 °C Voltage rate of change (rated VR) Operating junction and storage temperature range Document Number: 89152 Revision: 23-Mar-11 For technical questions within your region, please contact one of the following: www.vishay.com [email protected], [email protected], [email protected] 1 This datasheet is subject to change without notice. THE PRODUCT DESCRIBED HEREIN AND THIS DATASHEET ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 New Product V30120S, VI30120S Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER TEST CONDITIONS SYMBOL IF = 5 A IF = 15 A TA = 25 °C IF = 30 A Instantaneous forward voltage VF (1) IF = 5 A TA = 125 °C IF = 15 A IF = 30 A VR = 90 V Reverse current VR = 120 V TA = 25 °C TA = 125 °C TA = 25 °C IR (2) TA = 125 °C TYP. MAX. UNIT 0.50 - 0.70 - 0.99 1.10 0.43 - 0.60 - 0.74 0.82 18 - μA 12 - mA - 500 μA 22 35 mA V30120S VI30120S UNIT V Notes (1) Pulse test: 300 μs pulse width, 1 % duty cycle (2) Pulse test: Pulse width ≤ 40 ms THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER SYMBOL Typical thermal resistance RθJC 1.6 °C/W ORDERING INFORMATION (Example) PACKAGE PREFERRED P/N TO-220AB V30120S-M3/4W TO-262AA VI30120S-M3/4W TO-220AB TO-262AA V30120SHM3/4W VI30120SHM3/4W (1) (1) UNIT WEIGHT (g) PACKAGE CODE BASE QUANTITY DELIVERY MODE 1.88 4W 50/tube Tube 1.45 4W 50/tube Tube 1.88 4W 50/tube Tube 1.45 4W 50/tube Tube Note (1) AEC-Q101 qualified www.vishay.com 2 For technical questions within your region, please contact one of the following: Document Number: 89152 [email protected], [email protected], [email protected] Revision: 23-Mar-11 This datasheet is subject to change without notice. THE PRODUCT DESCRIBED HEREIN AND THIS DATASHEET ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 New Product V30120S, VI30120S Vishay General Semiconductor RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted) 100 Resistive or Inductive Load Instantaneous Reverse Current (mA) Average Forward Rectified Current (A) 40 35 30 25 20 15 10 5 Mounted on Specific Heatsink 0 25 50 75 100 125 150 TA = 100 °C 1 0.1 TA = 25 °C 0.01 175 10 20 30 40 50 60 70 80 90 Case Temperature (°C) Percent of Rated Peak Reverse Voltage (%) Fig. 1 - Forward Current Derating Curve Fig. 4 - Typical Reverse Characteristics 30 100 10 000 D = 0.5 TJ = 25 °C f = 1.0 MHz Vsig = 50 mVp-p D = 0.8 Junction Capacitance (pF) 25 Average Power Loss (W) TA = 125 °C 10 0.001 0 D = 0.3 20 D = 0.2 15 D = 1.0 D = 0.1 T 10 5 D = tp/T 1000 100 tp 10 0 0 5 10 20 15 25 30 0.1 35 1 10 100 Average Forward Current (A) Reverse Voltage (V) Fig. 2 - Forward Power Loss Characteristics Fig. 5 - Typical Junction Capacitance 10 Transient Thermal Impedance (°C/W) 100 Instantaneous Forward Current (A) TA = 150 °C TA = 150 °C TA = 125 °C 10 TA = 100 °C 1 TA = 25 °C 0.1 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 Junction to Case 1 0.1 0.01 0.1 1 10 100 Instantaneous Forward Voltage (V) t - Pulse Duration (s) Fig. 3 - Typical Instantaneous Forward Characteristics Fig. 6 - Typical Transient Thermal Impedance Document Number: 89152 Revision: 23-Mar-11 For technical questions within your region, please contact one of the following: www.vishay.com [email protected], [email protected], [email protected] 3 This datasheet is subject to change without notice. THE PRODUCT DESCRIBED HEREIN AND THIS DATASHEET ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 New Product V30120S, VI30120S Vishay General Semiconductor PACKAGE OUTLINE DIMENSIONS in inches (millimeters) TO-220AB 0.415 (10.54) MAX. 0.370 (9.40) 0.360 (9.14) 0.185 (4.70) 0.175 (4.44) 0.154 (3.91) 0.148 (3.74) 0.055 (1.39) 0.045 (1.14) 0.113 (2.87) 0.103 (2.62) 0.145 (3.68) 0.135 (3.43) 1 PIN 2 0.635 (16.13) 0.625 (15.87) 3 0.160 (4.06) 0.140 (3.56) 0.603 (15.32) 0.573 (14.55) 0.350 (8.89) 0.330 (8.38) 1.148 (29.16) 1.118 (28.40) 0.110 (2.79) 0.100 (2.54) 0.057 (1.45) 0.045 (1.14) 0.560 (14.22) 0.530 (13.46) 0.105 (2.67) 0.095 (2.41) 0.035 (0.90) 0.028 (0.70) 0.104 (2.65) 0.096 (2.45) 0.205 (5.20) 0.195 (4.95) 0.022 (0.56) 0.014 (0.36) TO-262AA 0.185 (4.70) 0.175 (4.44) 0.411 (10.45) MAX. 30° (TYP.) (REF.) 0.250 (6.35) MIN. 0.055 (1.40) 0.047 (1.19) 0.055 (1.40) 0.045 (1.14) K 0.950 (24.13) 0.920 (23.37) 1 PIN 2 0.510 (12.95) 0.470 (11.94) 0.350 (8.89) 0.330 (8.38) 3 0.160 (4.06) 0.140 (3.56) 0.110 (2.79) 0.100 (2.54) 0.057 (1.45) 0.045 (1.14) 0.104 (2.65) 0.096 (2.45) www.vishay.com 4 0.401 (10.19) 0.381 (9.68) 0.560 (14.22) 0.530 (13.46) 0.035 (0.90) 0.028 (0.70) 0.022 (0.56) 0.014 (0.35) 0.205 (5.20) 0.195 (4.95) For technical questions within your region, please contact one of the following: Document Number: 89152 [email protected], [email protected], [email protected] Revision: 23-Mar-11 This datasheet is subject to change without notice. THE PRODUCT DESCRIBED HEREIN AND THIS DATASHEET ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 11-Mar-11 www.vishay.com 1