4745

SHD126011
SHD126011P
SHD126011N
SHD126011D
SENSITRON
SEMICONDUCTOR
TECHNICAL DATA
DATASHEET 4745, REV. B.1
SILICON SCHOTTKY RECTIFIER
Ultra Low Reverse Leakage
175C Operating Temperature
Applications:
 Switching Power Supply  Converters  Free-Wheeling Diodes  Polarity Protection Diode
Features:








Ultra low Reverse Leakage Current
Soft Reverse Recovery at Low and High Temperature
Very Low Forward Voltage Drop
Low Power Loss, High Efficiency
High Surge Capacity
Guard Ring for Enhanced Durability and Long Term Reliability
Guaranteed Reverse Avalanche Characteristics
For ceramic seals use part number prefix SHDC
Maximum Ratings:
Characteristics
Peak Inverse Voltage
Max. Average Forward Current
Symbol
VRWM
IF(AV)
Max. Average Forward Current
IF(AV)
Max. Peak One Cycle NonRepetitive Surge Current
Maximun Thermal Resistence
(Per leg)
Max. Junction Temperature
Max. Storage Temperature
IFSM
Condition
Maximum DC Output Current
O
(@ TC=100 C) (Single,
Doubler)
Maximum DC Output Current
O
(@ TC=100 C) (Common
Cathode, Common Anode)
8.3 ms, half Sine wave
Max.
30
3.0
Units
V
A
6.0
A
55
A
RJC
-
11.9
C/W
TJ
Tstg
-
-65 to +175
-65 to +175
C
C
Max.
0.59
0.49
0.4
Units
V
V
mA
20
mA
220
pF
Electrical Characteristics:
Characteristics
Max. Forward Voltage Drop
Max. Reverse Current
Symbol
VF1
VF2
IR1
IR2
Max. Junction Capacitance
CT
Condition
@ 3A, Pulse, TJ = 25 C
@ 3A, Pulse, TJ = 125 C
@VR = 30V, Pulse,
TJ = 25 C
@VR = 30V, Pulse,
TJ = 125 C
@VR = 5V, TC = 25 C
fSIG = 1MHz,
VSIG = 50mV (p-p)
2013 Sensitron Semiconductor  221 West Industry Court  Deer Park, NY 11729-4681
PHONE (631) 586-7600  FAX (631) 242-9798  www.sensitron.com  [email protected]
SHD126011
SHD126011P
SHD126011N
SHD126011D
SENSITRON
TECHNICAL DATA
DATASHEET 4745, REV. B.1
Mechanical Dimensions: In Inches / mm
.150 (3.81
Dia.
.140 3.56)
.665 (16.89
.645 16.38)
.537 (13.64
.527 13.39)
1.132 (28.75
1.032 26.21)
.200 (5.08
.190 4.82)
.420 (10.67
.410 10.41)
1
2
.045 (1.14
.035 0.89)
.430 (10.92
.410 10.41)
3
.035 (0.89
.025 0.63)
3 Places
.100(2.54) BSC
2 Places
.120(3.05) BSC
TO-257
DEVICE TYPE
PIN 1
SINGLE RECTIFIER
CATHODE
COMMON CATHODE (P)
ANODE 1
COMMON ANODE (N)
CATHODE 1
DOUBLER (D)
ANODE
Note: Vf characteristics are for unpackaged die only.
PIN 2
ANODE
COMMON CATHODE
COMMON ANODE
CATHODE / ANODE
Typical Forw ard Characteristics
PIN 3
ANODE
ANODE 2
CATHODE 2
CATHODE
Typical Rev erse Characteristics
10
2
Instantaneous Reverse Current - I
10 0
F
(A)
150 °C
125 °C
100 °C
10 0
75 °C
10 -1
50 °C
10
-2
25 °C
10 -3
0
10 -1
10
20
Reverse Voltage - V
30
40
R (V)
Typical Junction Capacitance
25 °C
190
10
-2
0.0
0.1
0.2
0.3
0.4
0.5
Forward Voltage Drop - V F (V)
0.6
Junction Capacitance - C
T
(pF)
Instantaneous Forward Current - I
125 °C
R
(mA)
150 °C
10 1
170
150
130
110
0
10
20
Reverse Voltage - V
30
40
R (V)
2013 Sensitron Semiconductor  221 West Industry Court  Deer Park, NY 11729-4681
PHONE (631) 586-7600  FAX (631) 242-9798  www.sensitron.com  [email protected]
SHD126011
SHD126011P
SHD126011N
SHD126011D
SENSITRON
TECHNICAL DATA
DATASHEET 4745, REV. B.1
DISCLAIMER:
1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product
characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest version of the
datasheet(s).
2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical
equipment , and safety equipment) , safety should be ensured by using semiconductor devices that feature assured safety or by means of users’
fail-safe precautions or other arrangement .
3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during operation of
the user’s units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual property claims or any
other problems that may result from applications of information, products or circuits described in the datasheets.
4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting from use at
a value exceeding the absolute maximum rating.
5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor.
6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of Sensitron
Semiconductor.
7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will hinder
maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third party. When
exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulations.
2013 Sensitron Semiconductor  221 West Industry Court  Deer Park, NY 11729-4681
PHONE (631) 586-7600  FAX (631) 242-9798  www.sensitron.com  [email protected]