SHD126222 SHD126222P SHD126222N SHD126222D SENSITRON SEMICONDUCTOR TECHNICAL DATA DATA SHEET 872, REV. C Formerly SHD1262 / P / N / D HERMETIC POWER SCHOTTKY RECTIFIER Applications: Switching Power Supply Converters Free-Wheeling Diodes Polarity Protection Diode Features: Low Reverse Leakage Current Soft Reverse Recovery at Low and High Temperature Low Forward Voltage Drop Low Power Loss, High Efficiency High Surge Capacity Guard Ring for Enhanced Durability and Long Term Reliability Guaranteed Reverse Avalanche Characteristics MAXIMUM RATINGS ALL RATINGS ARE AT TA = 25 C UNLESS OTHERWISE SPECIFIED. RATING SYMBOL MAX. UNITS PIV 45 Volts MAXIMUM DC OUTPUT CURRENT (TC = 100 C) (Single / Doubler) IO 15 Amps MAXIMUM DC OUTPUT CURRENT (TC = 100 C) (Common Cathode / Common Anode) IO 16 Amps PEAK SINGLE CYCLE SURGE CURRENT tp = 8.3 msec. (PER LEG) IFSM 75 Amps MAXIMUM THERMAL RESISTANCE (Single) R 2.82 C/W -65 to +175 C PEAK INVERSE VOLTAGE (PER LEG) MAXIMUM OPERATING AND STORAGE TEMPERATURE RANGE JC Top, Tstg ELECTRICAL CHARACTERISTICS CHARACTERISTICS SYMBOL MAX. UNITS Vf 0.78 Volts MAXIMUM FORWARD VOLTAGE DROP Common Cathode Per Leg 0 IF = 15A, TA = 25 C 0 0.71 IF = 15A,TA = 125 C MAXIMUM FORWARD VOLTAGE DROP Common Anode / Doubler Per Leg 0 IF = 15A, TA = 25 C Vf 0 0 Ir 0 TA = 125 C JUNCTION CAPACITANCE VR = 10Vdc, f = 1mHz Volts 0.76 IF = 15A,TA = 125 C MAXIMUM REVERSE CURRENT Ir @ PIV (PER LEG) TA = 25 C 0.81 CJ VSIG = 50mV (p-p) (Max) (PER LEG) 2000 Sensitron Semiconductor 221 West Industry Court Deer Park, NY 11729-4681 PHONE (631) 586-7600 FAX (631) 242-9798 www.sensitron.com [email protected] 0.4 mA 15 mA 800 pF SHD126222 SHD126222P SHD126222N SHD126222D SENSITRON TECHNICAL DATA DATA SHEET 872, REV. C Mechanical Dimensions: In Inches / mm .150 (3.81 Dia. .140 3.56) .665 (16.89 .645 16.38) 1.132 (28.75 1.032 26.21) 1 2 .045 (1.14 .035 0.89) 1 2 3 1 COMMON ANODE 2 3 DOUBLER .430 (10.92 .410 10.41) 3 1 .035 (0.89 .025 0.63) 3 Places COMMON CATHODE .200 (5.08 .190 4.82) .420 (10.67 .410 10.41) .537 (13.64 .527 13.39) SINGLE .100(2.54) BSC 2 Places 2 3 3 2 1 .120(3.05) BSC TO-257 PINOUT TABLE TYPE SINGLE RECTIFIER DUAL RECTIFIER, COMMON CATHODE (P) DUAL RECTIFIER, COMMON ANODE (N) DUAL RECTIFIER, DOUBLER (D) PIN 1 CATHODE ANODE 1 CATHODE 1 ANODE Typical Forward Characteristics PIN 2 ANODE COMMON CATHODE COMMON ANODE ANODE/CATHODE PIN 3 ANODE ANODE 2 CATHODE 2 CATHODE Typical Reverse Characteristics 102 Instantaneous Reverse Current - I R (mA) 175 °C 101 125 °C 10 125 °C 100 100 °C 10-1 75 °C 50 °C 10-2 25 °C 10-3 0 100 0.2 0.3 0.4 0.5 0.6 0.7 Forward Voltage Drop -FV(V) 10 20 30 Reverse Voltage - RV (V) 40 50 Typical Junction Capacitance 25 °C 0.8 Junction Capacitance - C T (pF) Instantaneous Forward Current - I F (A) 175 °C 150 °C 1 800 700 600 500 400 300 200 0 10 20 30 Reverse Voltage - RV (V) 40 50 (Curves are for bare die only. SD125SB45A) 2000 Sensitron Semiconductor 221 West Industry Court Deer Park, NY 11729-4681 PHONE (631) 586-7600 FAX (631) 242-9798 www.sensitron.com [email protected] SENSITRON TECHNICAL DATA DATA SHEET 872, REV. C SHD126222 SHD126222P SHD126222N SHD126222D DISCLAIMER: 1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest version of the datasheet(s). 2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical equipment , and safety equipment) , safety should be ensured by using semiconductor devices that feature assured safety or by means of users’ fail-safe precautions or other arrangement . 3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during operation of the user’s units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual property claims or any other problems that may result from applications of information, products or circuits described in the datasheets. 4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting from use at a value exceeding the absolute maximum rating. 5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor. 6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of Sensitron Semiconductor. 7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will hinder maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third party. When exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulations. 2000 Sensitron Semiconductor 221 West Industry Court Deer Park, NY 11729-4681 PHONE (631) 586-7600 FAX (631) 242-9798 www.sensitron.com [email protected]