14 LD SSOP

MECHANICAL CASE OUTLINE
PACKAGE DIMENSIONS
14 LEAD SSOP
CASE 940A–03
ISSUE D
DATE 11/09/2000
SCALE 2:1
K
14 PL REF
0.12 (0.005)
M
T U
S
V
S
0.25 (0.010)
N
14
L/2
8
M
B
–U–
L
PIN 1
IDENT
1
7
N
F
DETAIL E
ÇÇÇÇ
ÉÉÉ
ÇÇÇÇ
ÇÇÇÇ
K
A
–V–
0.20 (0.008)
M
T U
J
S
J1
K1
SECTION N–N
0.076 (0.003)
–T–
SEATING
PLANE
–W–
C
D
G
H
DETAIL E
NOTES:
1. DIMENSIONING AND TOLERANCING PER ANSI
Y14.5M, 1982.
2. CONTROLLING DIMENSION: MILLIMETER.
3. DIMENSION A DOES NOT INCLUDE MOLD FLASH,
PROTRUSIONS OR GATE BURRS. MOLD FLASH
OR GATE BURRS SHALL NOT EXCEED 0.15
(0.006) PER SIDE.
4. DIMENSION B DOES NOT INCLUDE INTERLEAD
FLASH OR PROTRUSION. INTERLEAD FLASH OR
PROTRUSION SHALL NOT EXCEED 0.15 (0.006)
PER SIDE.
5. DIMENSION K DOES NOT INCLUDE DAMBAR
PROTRUSION/INTRUSION. ALLOWABLE DAMBAR
PROTRUSION SHALL BE 0.13 (0.005) TOTAL IN
EXCESS OF K DIMENSION AT MAXIMUM
MATERIAL CONDITION. DAMBAR INTRUSION
SHALL NOT REDUCE DIMENSION K BY MORE
THAN 0.07 (0.002) AT LEAST MATERIAL
CONDITION.
6. TERMINAL NUMBERS ARE SHOWN FOR
REFERENCE ONLY.
7. DIMENSION A AND B ARE TO BE DETERMINED
AT DATUM PLANE -W-.
DIM
A
B
C
D
F
G
H
J
J1
K
K1
L
M
MILLIMETERS
MIN
MAX
6.07
6.33
5.20
5.38
1.73
1.99
0.05
0.21
0.63
0.95
0.65 BSC
1.08
1.22
0.09
0.20
0.09
0.16
0.25
0.38
0.25
0.38
7.65
7.90
0
8
INCHES
MIN
MAX
0.238
0.249
0.205
0.212
0.068
0.078
0.002
0.008
0.024
0.037
0.026 BSC
0.042
0.048
0.003
0.008
0.003
0.006
0.010
0.015
0.010
0.015
0.301
0.311
0
8
XXXX
XXXXXX
AWLYW
ON Semiconductor and
are trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes
without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular
purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability,
including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or
specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be
validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others.
SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications
intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or
death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold
SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable
attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim
alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer.
 Semiconductor Components Industries, LLC, 2000
November, 2000 – Rev. 03D
1
Case Outline Number:
940A