DG9454 Vishay Siliconix Compact, Low Power Consumption, Triple SPDT (Triple 2:1 Multiplexers) DESCRIPTION FEATURES The DG9454 is a triple SPDT (triple 2:1 multiplexers) with enhanced performance on low power consumption, while guarantees 1.8 V logic compatible over the full operation voltage range. The DG9454 is designed to operate from a + 2.7 V to + 13.2 V supply at V+, and + 2.5 V to + 5.5 V at VL. The DG9454 is a high precision switch of low parasitic capacitance, low leakage, low charge injection, and fast switching speed. Processed with advanced CMOS technology, the DG9454 conducts equally well in both directions, offers rail to rail analog signal handling and can be used both as multiplexers as well as de-multiplexers. The advantages of DG9454 at size, weight, power consumption, and low voltage control capability make it ideal for portable consumer applications such as 3D glasses (3D goggles). Its precise switching, wide dynamic range, and low parasitic characters make it a high performance switch for healthcare, data acquisition, and instrument products. The DG9454 operating temperature is specified from - 40 °C to + 85 °C and are available and the ultra compact 1.8 mm x 2.6 mm miniQFN16 packages. As a comitted partner to the community and the environment, Vishay Siliconix manufactures this product with lead (Pb)-free device terminations. DG9454 is offered in a miniQFN package. The miniQFN package has a nickelpalladium-gold device termination and is represented by the lead (Pb)-free “-E4” suffix. The nickel-palladium-gold device terminations meet all JEDEC standards for reflow and MSL ratings. • Operates with V+ = 2.7 V to 13.2 V; VL = 2.5 V to 5.5 V • Guaranteed 1.8 V logic control at full V+ range • Low power consumption, < 1 µA • High bandwidth: 540 MHz • Low charge injection over the full signal range (less than 0.9 pQ) • Low switch capacitance (Cs(off) 2 pF typ.) • Good isolation and crosstalk performance (typ. - 65 dB at 10 MHz) • Compact and light miniQFN16 package (1.8 mm x 2.6 mm) • Compliant to RoHS Directive 2002/95/EC • Halogen-free according to IEC 61249-2-21 definition APPLICATIONS • • • • • • 3D glasses (goggles) Touch panels Data acquisition Medical and healthcare devices Control and automation equipments Test instruments FUNCTIONAL BLOCK DIAGRAM AND PIN CONFIGURATION DG9454 mQFN-16 Y0 Y1 VCC Y 16 15 14 13 Z1 1 12 X Z 2 11 X1 Z0 3 10 X0 Enable 4 9 A 5 6 VL GND 77 8 C B Top View Yxx Pin 1 Device Marking: 5xx for DG9454 (miniQFN16) xx = Date/Lot Traceability Code Document Number: 67185 S11-0345-Rev. C, 07-Mar-11 www.vishay.com 1 DG9454 Vishay Siliconix TRUTH TABLE Select Inputs On Switches Enable Input C B A DG9454 H X X X All Switches Open L L L L X to X0, Y to Y0, Z to Z0 L L L H X to X1, Y to Y0, Z to Z0 L L H L X to X0, Y to Y1, Z to Z0 L L H H X to X1, Y to Y1, Z to Z0 L H L L X to X0, Y to Y0, Z to Z1 L H L H X to X1, Y to Y0, Z to Z1 L H H L X to X0, Y to Y1, Z to Z1 L H H H X to X1, Y to Y1, Z to Z1 ORDERING INFORMATION Temp. Range Package Part Number 16-Pin miniQFN DG9454EN-T1-E4 DG9454 - 40 °C to 125 °Ca Notes: a. - 40 °C to 85 °C datasheet limits apply. ABSOLUTE MAXIMUM RATINGS (TA = 25 °C, unless otherwise noted) Parameter Digital Inputsa, VS, VD, VL Limit Unit GND - 0.3 to (V+) + 0.3 or 30 mA, whichever occurs first V V+ to GND 14 Continuous Current (Any terminal) 30 Peak Current, S or D (Pulsed 1 ms, 10 % duty cycle) 100 Storage Temperature mA - 65 to 150 °C Power Dissipationb 16-Pin miniQFNc, d 525 mW Thermal Resistanceb 16-Pin miniQFNd 152 °C/W Latch-up (per JESD78) mA Notes: a. Signals on SX, DX, VL or INX exceeding V+ will be clamped by internal diodes. Limit forward diode current to maximum current ratings. b. All leads welded or soldered to PC board. c. Derate 6.6 mW/°C above 70 °C. d. Manual soldering with iron is not recommended for leadless components. The miniQFN-16 is a leadless package. The end of the lead terminal is exposed copper (not plated) as a result of the singulation process in manufacturing. A solder fillet at the exposed copper lip cannot be guaranteed and is not required to ensure adequate bottom side solder interconnection. SPECIFICATIONS FOR UNIPOLAR SUPPLIES Parameter Symbol Test Conditions Unless Otherwise Specified VCC = + 12 V, VL = 2.7 V VIN(A, B, C and enable) = 1.6 V, 0.5 Va - 40 °C to + 125 °C - 40 °C to + 85 °C Temp.b Typ.c Min.d Max.d Min.d Max.d Unit 0 12 0 12 V Analog Switch Analog Signal Rangee On-Resistance On-Resistance Match On-Resistance Flatness www.vishay.com 2 VANALOG Full RDS(on) IS = 1 mA, VD = 0.7 V, 6.0 V, 11.3 V Room Full 80 120 143 120 137 RON IS = 1 mA, VD = + 0.7 V Room Full 4 7 10 7 8 RFLATNESS IS = 1 mA, VD = 0.7 V, 6.0 V, 11.3 V Room Full 32 26 30 26 28 Document Number: 67185 S11-0345-Rev. C, 07-Mar-11 DG9454 Vishay Siliconix SPECIFICATIONS FOR UNIPOLAR SUPPLIES Parameter Symbol Test Conditions Unless Otherwise Specified VCC = + 12 V, VL = 2.7 V VIN(A, B, C and enable) = 1.6 V, 0.5 Va - 40 °C to + 125 °C - 40 °C to + 85 °C Temp.b Typ.c Min.d Max.d Min.d Max.d Room Full ± 0.02 -1 - 50 1 50 -1 -5 1 5 Room Full ± 0.02 -1 - 50 1 50 -1 -5 1 5 Room Full ± 0.02 -1 - 50 1 50 -1 -5 1 5 Unit Analog Switch IS(off) Switch Off Leakage Current ID(off) Channel On Leakage Current ID(on) V+ = + 13.2 V, VL = 2.7 V VD = 1 V/12.2 V, VS = 12.2 V/1 V V+ = + 13.2 V, VL = 2.7 V VD = VS = 1 V/12.2 V nA Digital Control Logic Low Input Voltage VINL Logic High Input Voltage VINH Logic Low Input Current IL VIN A0, A1, A2 and enable under test = 0.5 V Full 0.01 -1 1 -1 1 Logic High Input current IH VIN A0, A1, A2 and enable above test = 1.6 V Full 0.01 -1 1 -1 1 Room Full 80 135 205 135 170 Room Full 115 180 250 180 215 Room Full 46 110 180 110 145 Room Full 37 Full 0.86 Room < - 90 Full VL = 2.7 V 0.5 Full 1.6 0.5 1.6 V µA Dynamic Characteristics Transition Time tTRANS Enable Turn-On Time tON(EN) Enable Turn-Off Time tOFF(EN) Break-Before-Make Time Delay tD Charge Injectione Q RL = 300 , CL = 35 pF see figure 1, 2, 3 CL = 1 nF, RGEN = 0 , VGEN = 0 V 100 kHz Off Isolatione OIRR f = 1 MHz, RL = 50 , CL = 5 pF Crosstalke XTALK Bandwidth, - 3dBe Source Off Capacitance Drain Off BW e Channel On Capacitance 1 MHz Room - 80 10 MHz Room - 61 100 kHz Room < - 90 1 MHz Room - 81 10 MHz Room - 65 Room 540 Room 2 Room 3 Room 6 Room 0.01 Room Full 0.05 Room Full 0.05 Room Full 0.05 RL = 50 CS(off) Capacitancee CD(off) e Total Harmonic Distortione f = 1 MHz CD(on) THD 12 Signal = 1 VRMS, 20 Hz to 20 kHz, RL = 600 ns 12 pC dB MHz pF % Power Supply Power Supply Range I+ VIN(A, B, C and enable) = 0 V or + 12 V Ground Current Logic Supply Current IGND IL VL = 2.7 V 1 10 -1 - 10 1 10 -1 - 10 1 10 µA 1 10 Notes: a. VIN = input voltage to perform proper function. b. Room - 25 °C, Full = as determined by the operating temperature suffix. c. Typical values are for DESIGN AID ONLY, not guaranteed nor subject to production testing. d. The algebraic convention whereby the most negative value is a minimum and the most positive a maximum, is used in this data sheet. e. Guaranteed by design, not subject to production test. Document Number: 67185 S11-0345-Rev. C, 07-Mar-11 www.vishay.com 3 DG9454 Vishay Siliconix SPECIFICATIONS FOR UNIPOLAR SUPPLIES Parameter Symbol Test Conditions Unless Otherwise Specified VCC = + 5 V, VL = 2.7 V VIN(A, B, C and enable) = 1.5 V, 0.6 Va - 40 °C to + 125 °C - 40 °C to + 85 °C Temp.b Typ.c Min.d Max.d Min.d Max.d Unit 0 5 0 5 V Analog Switch Analog Signal Rangee VANALOG On-Resistance On-Resistance Match On-Resistance Flatness RON IS = 1 mA, VD = 0 V, + 3.5 V Room Full 105 165 205 165 194 RON IS = 1 mA, VD = + 3.5 V Room Full 3.2 8 13 8 10 RFLATNESS IS = 1 mA, VD = 0 V, + 3 V Room Full 17 26 30 26 28 Room Full ± 0.02 -1 - 50 1 50 -1 -5 1 5 Room Full ± 0.02 -1 - 50 1 50 -1 -5 1 5 ± 0.02 -1 - 50 1 50 -1 -5 1 5 IS(off) Switch Off Leakage Current Full ID(off) V+ = + 5.5 V, V- = 0 V VD = 1 V/4.5 V, VS = 4.5 V/1 V ID(on) V+ = + 5.5 V, V- = 0 V VD = VS = 1 V/4.5 V Room Full VIN(A, B, C and enable) Low VIL VL = 2.7 V Full VIN(A, B, C and enable) High VIH VL = 2.7 V Full Input Current, VIN Low IL VIN(A, B, C and enable) under test = 0.6 V Full 0.01 -1 1 -1 1 Input Current, VIN High IH VIN(A, B, C and enable) under test = 1.5 V Full 0.01 -1 1 -1 1 Room Full 96 175 250 175 210 Room Full 200 295 365 295 330 Room Full 60 155 225 155 190 Room Full 50 Full 0.4 Channel On Leakage Current nA Digital Control 0.6 1.5 0.6 1.5 V µA Dynamic Characteristics tTRANS Transition Time Enable Turn-On Time tON Enable Turn-Off Time tOFF Break-Before-Make Time Delay tD Charge Injectione Q Off Isolation e OIRR Channel-to-Channel Crosstalke XTALK Source Off Capacitancee CS(off) Drain Off Capacitancee CD(off) Channel On Capacitance e RL = 300 , CL = 35 pF see figure 1, 2, 3 Vg = 0 V, Rg = 0 , CL = 1 nF 20 RL = 50 , CL = 5 pF f = 100 kHz Room < - 90 Room < - 90 Room 2 f = 1 MHz Room 4 Room 7 Room Full 0.05 Room Full - 0.05 Room Full 0.05 CD(on) ns 20 pC dB pF Power Supply Power Supply Current I+ VIN(A, B, C and enable) = 0 V or 5 V Ground Current Logic Supply Current IGND IL VL = 2.7 V 1 10 -1 - 10 1 10 -1 - 10 1 10 µA 1 10 Notes: a. VIN = input voltage to perform proper function. b. Room - 25 °C, Full = as determined by the operating temperature suffix. c. Typical values are for DESIGN AID ONLY, not guaranteed nor subject to production testing. d. The algebraic convention whereby the most negative value is a minimum and the most positive a maximum, is used in this data sheet. e. Guaranteed by design, not subject to production test. www.vishay.com 4 Document Number: 67185 S11-0345-Rev. C, 07-Mar-11 DG9454 Vishay Siliconix SPECIFICATIONS FOR UNIPOLAR SUPPLIES Parameter Symbol Test Conditions Unless Otherwise Specified VCC = + 3 V, VL = 2.7 V VIN(A, B, C and enable) = 1.5 V, 0.6 Va - 40 °C to + 125 °C - 40 °C to + 85 °C Temp.b Typ.c Min.d Max.d Min.d Max.d Unit 0 3 0 3 V 265 289 Analog Switch Analog Signal Rangee VANALOG RDS(on) On-Resistance IS(off) Switch Off Leakage Current ID(off) Channel On Leakage Current ID(on) Full IS = 1 mA, VD = 1.5 V V+ = 3.3 V, VL = 2.7 V VD = 0.3 V/3.0 V, VS = 3.0 V/0.3 V V+ = 3.3 V, VL = 2.7 V VS = VD = 0.3 V/3.0 V Room Full 171 265 310 Room Full ± 0.02 -1 - 50 1 50 -1 -5 1 5 Room Full ± 0.02 -1 - 50 1 50 -1 -5 1 5 Room Full ± 0.02 -1 - 50 1 50 -1 -5 1 5 nA Digital Control Logic Low Input Voltage VINL Logic High Input Voltage VINH Logic Low Input Current IL VIN A0, A1, A2 and enable under test = 0.6 V Full 0.01 -1 1 -1 1 Logic High Input Current IH VIN A0, A1, A2 and enable above test = 1.5 V Full 0.01 -1 1 -1 1 Room Full 151 270 355 270 315 Room Full 390 510 610 510 565 Room Full 90 220 320 220 275 Room Full 90 Full 0.5 100 kHz Room < - 90 100 kHz Room < - 90 Room 2 Room 4 Room 7 Room Full 0.05 Room Full 0.05 Room Full 0.05 Full VL = + 2.7 V 0.6 Full 1.5 0.6 1.5 V µA Dynamic Characteristics Transition Time tTRANS Enable Turn-On Time tON(EN) Enable Turn-Off Time tOFF(EN) Break-Before-Make Time Delay tD Charge Injectione Q Off Isolatione OIRR Crosstalke XTALK Source Off Capacitancee Drain Off Capacitance CL = 1 nF, RGEN = 0 , VGEN = 0 V f = 1 MHz, RL = 50 , CL = 5 pF CS(off) e Channel On Capacitance RL = 300 , CL = 35 pF see figure 1, 2, 3 CD(off) e f = 1 MHz CD(on) 35 ns 35 pC dB pF Power Supply Power Supply Range I+ VIN(A, B, C and enable) = 0 V or + 3 V Ground Current Logic Supply Current IGND IL VL = 2.7 V 1 10 -1 - 10 1 10 -1 - 10 1 10 µA 1 10 Notes: a. VIN = input voltage to perform proper function. b. Room - 25 °C, Full = as determined by the operating temperature suffix. c. Typical values are for DESIGN AID ONLY, not guaranteed nor subject to production testing. d. The algebraic convention whereby the most negative value is a minimum and the most positive a maximum, is used in this data sheet. e. Guaranteed by design, not subject to production test. Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. Document Number: 67185 S11-0345-Rev. C, 07-Mar-11 www.vishay.com 5 DG9454 Vishay Siliconix TYPICAL CHARACTERISTICS (25 °C, unless otherwise noted) 500 500 T = 25 °C VL = 2.7 V IS = 1 mA RON - On-Resistance (Ω) 400 400 VCC = 2.7 V 350 VCC = 3.0 V 300 VCC = 3.3 V 250 VCC = 4.5 V VCC = 5.0 V VCC = 5.5 V 200 150 VCC = 3.0 V, VL = 2.7 V IS = 1 mA 450 RON - On-Resistance (Ω) 450 VCC = 10.8 V VCC = 12.0 V VCC = 13.2 V 350 - 40 °C 300 200 150 100 100 50 50 0 0 0 2 4 6 8 10 12 0 14 0.5 1.0 VD - Analog Voltage (V) 1.5 2.0 2.5 3.0 VD - Analog Voltage (V) On-Resistance vs. Analog Voltage and Temperature On-Resistance vs. VD and Signal Supply Voltage 400 250 VCC = 5.0 V VL = 2.7 V IS = 1 mA 350 VCC = 12 V, VL = 2.7 V IS = 1 mA 250 225 300 + 125 °C + 85 °C + 25 °C - 40 °C 250 RON - On-Resistance (Ω) RON - On-Resistance (Ω) + 25 °C + 85 °C + 125 °C 250 200 150 100 + 125 °C + 85 °C + 25 °C - 40 °C 200 175 150 125 100 75 50 50 25 0 0 0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 0 1 3 4 5 6 7 8 9 10 11 12 VD - Analog Voltage (V) VD - Analog Voltage (V) On-Resistance vs. Analog Voltage and Temperature On-Resistance vs. Analog Voltage and Temperature 100 000 600 10 000 1000 100 ID(ON) ID(OFF) IS(OFF) 10 1 0.1 - 60 - 20 20 60 100 Temperature (°C) Leakage Current vs. Temperature www.vishay.com 6 140 tON(EN), tOFF(EN) - Switching Time (ns) VCC = + 13.2 V VL = 2.7 V Leakage Current (pA) 2 VCC = + 3 V, VL = 2.7 V, tON VCC = + 5 V, VL = 2.7 V, tON 500 VCC = + 12 V, VL = 2.7 V, tON 400 300 VCC = + 5 V, VL = 2.7 V, tOFF VCC = + 3 V, VL = 2.7 V, tOFF 200 100 0 - 50 VCC = + 12 V, VL = 2.7 V, tOFF 0 50 100 150 Temperature (°C) Switching Time vs. Temperature Document Number: 67185 S11-0345-Rev. C, 07-Mar-11 DG9454 Vishay Siliconix TYPICAL CHARACTERISTICS (25 °C, unless otherwise noted) 10 Loss 0 VT - Switching Threshold (V) Loss, OIRR, XTALK (dB) - 10 VCC = + 12 V VL = 2.7 V RL = 50 Ω - 20 - 30 - 40 OIRR - 50 XTALK - 60 - 70 - 80 - 90 - 100 100K 1M 10M 100M 3.0 2.8 2.6 2.4 2.2 2.0 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0 1G - 40 °C to + 125 °C VIH = - 40 °C; VL = 5 V VIL = 125 °C; VL = 5 V 4 5 6 7 Frequency (Hz) 9 10 11 12 13 14 Switching Threshold vs. Logic Supply Voltage 2.00 - 40 °C to + 125 °C VL = + 2.5 V 1.50 QINJ - Charge Injection (pC) VT - Switching Threshold (V) 8 V+ - Supply Voltage (V) Insertion Loss, Off-Isolation, Crosstalk vs. Frequency 3.0 2.8 2.6 2.4 2.2 2.0 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0 VL = + 5 V VIH = - 40 °C; VL = 2.5 V VIL = 125 °C; VL = 2.5 V VCC = + 12 V VL = 2.7 V 1.00 VCC = + 5 V VL = 2.7 V 0.50 0 - 0.50 VCC = + 3 V VL = 2.7 V - 1.00 - 1.50 - 2.00 4 5 6 7 8 9 10 11 12 13 14 0 1 2 3 V+ - Supply Voltage (V) 4 5 6 7 8 9 10 11 12 VS - Analog Voltage (V) Switching Threshold vs. Logic Supply Voltage Charge Injection vs. Analog Voltage 10 mA 1 mA ICC VCC = + 13.2 V VL = 2.7 V I+ - Supply Current 100 µA IGND 10 µA 1 µA IL 100 nA 10 nA 1 nA 100 pA 10 pA 10 100 1K 10K 100K 1M 10M Input Switching Frequency (Hz) Current vs. Frequency Document Number: 67185 S11-0345-Rev. C, 07-Mar-11 www.vishay.com 7 DG9454 Vishay Siliconix TEST CIRCUITS 1.8 V VCC VA, B, C VCC X0 or Y0 or Z0 A or B or C VX0 or VY0 or VZ0 VX0 or VY0 or VZ0 90 % VO 50 Ω DG9454 X1 or Y1 or Z1 ENABLE GND 50 % VX7 VX3 or VY3 VX1 or VY1 or VZ1 VX1 or VY1 or VZ1 VO X or Y or Z VL 50 % 0V 300 Ω 90 % t TRANS t TRANS V0 or Y0 or Z0 ON 35 pF X1 or Y1 or Z1 ON (DG9454) VL Figure 1. Transition Time VCC 1.8 V VENABLE VCC X0 or Y0 or Z0 A or B or C VCC VX0 or VY0 or VZ0 X1 or Y1 or Z1 DG9454 ENABLE 50 Ω GND 90 % VO VO X or Y or Z VL 50 % 0V 300 Ω 50 % 90 % 0V 35 pF t OFF tON Disable X or Y or Z Enable X or Y or Z VL Figure 2. Enable Switching Time VCC VCC X0, X1 or Y0, Y1 or Z0, Z1 A or B or C 1.8 V VA, B, C 50 % 0V VCC VX0 or VY0 or VZ0 50 Ω 80 % DG9454 ENABLE GND VO VO X or Y or Z VL 300 Ω 0V 35 pF tD VL Figure 3. Break-Before-Make www.vishay.com 8 Document Number: 67185 S11-0345-Rev. C, 07-Mar-11 DG9454 Vishay Siliconix TEST CIRCUITS VCC tr < 5 ns tf < 5 ns VCC VCC A B C Channel Select ON OFF VENABLE OFF 0V Rg Xx VO Vg VL GND ΔVO VO X ENABLE 1 nF VL Figure 4. Charge Injection VCC VCC Network Analyzer Network Analyzer VCC VCC VIN A B C A B C X0 Rg = 50 Ω Vg VOUT X ENABLE VCC VL GND VIN X0 VOUT X ENABLE VL GND 50 Ω Rg = 50 Ω Vg 50 Ω VL VL Insertion Loss = 20 log Off Isolation = 20 log VOUT VIN Figure 5. Insertion Loss VOUT VIN Figure 6. Off Isolation VCC VCC Network Analyzer VCC A B C X0 VIN Vg Rg = 50 Ω VCC Channel Select A B C X0 | to | Xx X 50 Ω Xx ENABLE GND VOUT VL 50 Ω ENABLE GND Impedance Analyzer X VL VL Crosstalk = 20 log VOUT VIN Figure 7. Crosstalk VL Figure 8. Source, Drain Capacitance Vishay Siliconix maintains worldwide manufacturing capability. Products may be manufactured at one of several qualified locations. Reliability data for Silicon Technology and Package Reliability represent a composite of all qualified locations. For related documents such as package/tape drawings, part marking, and reliability data, see www.vishay.com/ppg?67185. Document Number: 67185 S11-0345-Rev. C, 07-Mar-11 www.vishay.com 9 Package Information www.vishay.com Vishay Siliconix miniQFN-16L (1) (2) (4) (3) L1 (12) (11) (10) (9) (5) (16) L D (8) (14) (7) (15) (6) (16) (5) (15) (6) (14) (7) (13) (8) E (13) (12) (11) (10) (9) (1) (2) (3) (4) b DIM e A C A1 BACK SIDE VIEW MILLIMETERS INCHES MIN. NAM MAX. MIN. NAM MAX. A 0.70 0.75 0.80 0.0275 0.0295 0.0315 A1 0 - 0.05 0 - 0.002 b 0.15 0.20 0.25 0.0059 0.0078 0.0098 C 0.15 0.20 0.25 0.0059 0.0078 0.0098 D 2.50 2.60 2.70 0.0984 0.1023 0.1063 E 1.70 1.80 1.90 0.0669 0.0708 0.0748 e 0.40 BSC 0.0157 BSC L 0.35 0.40 0.45 0.0137 0.0157 0.0177 L1 0.45 0.50 0.55 0.0177 0.0196 0.0216 ECN T16-0234-Rev. B, 09-May-16 DWG: 5954 Revision: 09-May-16 1 Document Number: 74323 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 PAD Pattern Vishay Siliconix RECOMMENDED MINIMUM PADS FOR MINI QFN 16L 0.562 (0.0221) 0.400 (0.0157) 0.225 (0.0089) 1 2.900 (0.1142) 0.463 (0.0182) 1.200 (0.0472) 2.100 (0.0827) Mounting Footprint Dimensions in mm (inch) Document Number: 66557 Revision: 05-Mar-10 www.vishay.com 1 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000